Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=12648): Process ended prematurely: osmo-stp_10.42.42.5(pid=12648) [trial-2368↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12648)]
Standard Output
---------------------------------------------- trial-2368 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 02:15:04.394407 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:15:04.405773 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 02:15:04.561807 tst cs_paging_gprs_active.py: using LAC 25282 02:15:04.692582 tst cs_paging_gprs_active.py: using RAC 37 02:15:04.823483 tst cs_paging_gprs_active.py: using CellId 25282 02:15:04.955899 tst cs_paging_gprs_active.py: using BVCI 25283 02:15:04.981746 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:15:04.993223 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:15:05.004417 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:15:05.015633 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:15:05.026779 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:15:05.038037 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:15:05.049394 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:15:05.060401 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:15:05.071806 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:15:05.192906 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:15:05.484101 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:15:05.615296 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:15:05.942216 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12638): Launched 02:15:06.214667 run iperf3-srv_10.42.42.10(pid=12639): Launched 02:15:06.407119 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:15:06.538106 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:15:06.864261 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12640): Launched 02:15:07.135941 run iperf3-srv_10.42.42.10(pid=12641): Launched 02:15:07.327054 tst cs_paging_gprs_active.py:38: start network... 02:15:07.457447 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:15:07.953796 run create_hlr_db(pid=12642): Launched 02:15:08.133905 bus /gobi_6: Setting Powered False 02:15:09.156242 run create_hlr_db(pid=12642): Terminated: ok {rc=0} 02:15:09.604838 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12644): Launched 02:15:09.944032 run osmo-hlr_10.42.42.2(pid=12645): Launched 02:15:10.067206 run osmo-stp_10.42.42.5: Starting osmo-stp 02:15:10.654781 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12647): Launched 02:15:10.993633 run osmo-stp_10.42.42.5(pid=12648): Launched 02:15:11.115662 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:15:11.704160 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12650): Launched 02:15:11.824131 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:15:12.118648 run patchelf(pid=12651): Launched 02:15:12.315274 run osmo-stp_10.42.42.5(pid=12648): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12648)] 02:15:12.458759 run osmo-stp_10.42.42.5(pid=12648): stdout: | (launched: 2022-12-10_02:15:10.826089) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:15:12.602605 run osmo-stp_10.42.42.5(pid=12648): stderr: | �[0;m�[38;5;43m20221210021511024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210021511024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210021511025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210021511025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210021511026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210021511026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210021511026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:15:12.741864 run osmo-stp_10.42.42.5(pid=12648): stdout: | (launched: 2022-12-10_02:15:10.826089) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:15:12.879602 run osmo-stp_10.42.42.5(pid=12648): stderr: | �[0;m�[38;5;43m20221210021511024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210021511024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210021511025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210021511025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210021511026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210021511026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210021511026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:15:13.040205 run patchelf(pid=12651): Terminating (SIGINT) 02:15:13.229259 run patchelf(pid=12651): Terminated: ok {rc=0} 02:15:13.264063 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12648): Process ended prematurely: osmo-stp_10.42.42.5(pid=12648) [trial-2368↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12648)] [trial-2368↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 02:15:13.274111 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 02:15:13.337695 run osmo-hlr_10.42.42.2(pid=12645): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12645)] 02:15:13.389434 run osmo-hlr_10.42.42.2(pid=12645): stdout: | (launched: 2022-12-10_02:15:09.776449) 02:15:13.441761 run osmo-hlr_10.42.42.2(pid=12645): stderr: | �[0;m�[1;31m20221210021509978 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210021509978 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210021509978 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210021509978 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210021509978 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210021509978 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210021509990 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210021509999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210021509999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210021509999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:15:13.486450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12638): Terminating (SIGTERM) 02:15:13.528377 run iperf3-srv_10.42.42.10(pid=12639): Terminating (SIGTERM) 02:15:13.570576 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12640): Terminating (SIGTERM) 02:15:13.613615 run iperf3-srv_10.42.42.10(pid=12641): Terminating (SIGTERM) 02:15:13.655980 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12644): Terminating (SIGTERM) 02:15:13.698442 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12647): Terminating (SIGTERM) 02:15:13.740697 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12650): Terminating (SIGTERM) 02:15:13.750507 --- ParallelTerminationStrategy: PID 12638 died... 02:15:13.807071 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12638): Terminated: ok {rc=0} 02:15:13.817356 --- ParallelTerminationStrategy: PID 12639 died... 02:15:13.873150 run iperf3-srv_10.42.42.10(pid=12639): Terminated {rc=256} 02:15:13.883543 --- ParallelTerminationStrategy: PID 12640 died... 02:15:13.939464 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12640): Terminated: ok {rc=0} 02:15:13.949913 --- ParallelTerminationStrategy: PID 12641 died... 02:15:14.006013 run iperf3-srv_10.42.42.10(pid=12641): Terminated {rc=256} 02:15:14.016056 --- ParallelTerminationStrategy: PID 12644 died... 02:15:14.071980 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12644): Terminated: ok {rc=0} 02:15:14.082079 --- ParallelTerminationStrategy: PID 12647 died... 02:15:14.138140 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12647): Terminated: ok {rc=0} 02:15:14.148213 --- ParallelTerminationStrategy: PID 12650 died... 02:15:14.204059 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12650): Terminated: ok {rc=0} 02:15:14.292636 bus /gobi_0: Setting Powered False 02:15:15.400535 bus /gobi_0: Setting Powered False 02:15:16.534067 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12648): Process ended prematurely: osmo-stp_10.42.42.5(pid=12648) [trial-2368↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12648)]