Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12718): Process ended prematurely: osmo-stp_10.42.42.5(pid=12718) [trial-2368↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12718)]
Standard Output
---------------------------------------------- trial-2368 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:16:06.401577 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:06.412337 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:16:06.561603 tst cs_paging_gprs_active.py: using LAC 25287 02:16:06.685916 tst cs_paging_gprs_active.py: using RAC 42 02:16:06.815449 tst cs_paging_gprs_active.py: using CellId 25287 02:16:06.942607 tst cs_paging_gprs_active.py: using BVCI 25288 02:16:06.966701 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:06.977639 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:06.988319 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:06.999494 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:07.010443 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:07.021443 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:07.032449 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:07.043302 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:07.054449 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:16:07.177473 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:16:07.466548 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:16:07.598239 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:16:07.924420 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12708): Launched 02:16:08.196278 run iperf3-srv_10.42.42.10(pid=12709): Launched 02:16:08.387050 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:16:08.517592 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:16:08.843254 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12710): Launched 02:16:09.114501 run iperf3-srv_10.42.42.10(pid=12711): Launched 02:16:09.305885 tst cs_paging_gprs_active.py:38: start network... 02:16:09.436597 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:16:09.933076 run create_hlr_db(pid=12712): Launched 02:16:10.113541 bus /gobi_6: Setting Powered False 02:16:11.135544 run create_hlr_db(pid=12712): Terminated: ok {rc=0} 02:16:11.554577 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12714): Launched 02:16:11.872754 run osmo-hlr_10.42.42.2(pid=12715): Launched 02:16:11.996037 run osmo-stp_10.42.42.5: Starting osmo-stp 02:16:12.553213 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12717): Launched 02:16:12.870101 run osmo-stp_10.42.42.5(pid=12718): Launched 02:16:12.985701 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:16:13.533264 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12720): Launched 02:16:13.645409 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:16:13.921728 run patchelf(pid=12721): Launched 02:16:14.105811 run osmo-stp_10.42.42.5(pid=12718): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12718)] 02:16:14.239837 run osmo-stp_10.42.42.5(pid=12718): stdout: | (launched: 2022-12-10_02:16:12.712448) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:16:14.374397 run osmo-stp_10.42.42.5(pid=12718): stderr: | �[0;m�[38;5;43m20221210021612887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210021612887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210021612888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210021612888 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210021612888 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210021612889 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210021612889 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:16:14.504040 run osmo-stp_10.42.42.5(pid=12718): stdout: | (launched: 2022-12-10_02:16:12.712448) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:16:14.633370 run osmo-stp_10.42.42.5(pid=12718): stderr: | �[0;m�[38;5;43m20221210021612887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210021612887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210021612888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210021612888 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210021612888 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210021612889 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210021612889 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:16:14.783384 run patchelf(pid=12721): Terminating (SIGINT) 02:16:14.959424 run patchelf(pid=12721): Terminated: ok {rc=0} 02:16:14.991526 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12718): Process ended prematurely: osmo-stp_10.42.42.5(pid=12718) [trial-2368↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12718)] [trial-2368↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:16:15.000755 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 02:16:15.062227 run osmo-hlr_10.42.42.2(pid=12715): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12715)] 02:16:15.112297 run osmo-hlr_10.42.42.2(pid=12715): stdout: | (launched: 2022-12-10_02:16:11.715305) 02:16:15.162964 run osmo-hlr_10.42.42.2(pid=12715): stderr: | �[0;m�[1;31m20221210021611895 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210021611895 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210021611895 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210021611895 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210021611895 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210021611895 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210021611907 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210021611917 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210021611917 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210021611918 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:16:15.205568 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12708): Terminating (SIGTERM) 02:16:15.246109 run iperf3-srv_10.42.42.10(pid=12709): Terminating (SIGTERM) 02:16:15.286420 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12710): Terminating (SIGTERM) 02:16:15.326844 run iperf3-srv_10.42.42.10(pid=12711): Terminating (SIGTERM) 02:16:15.367203 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12714): Terminating (SIGTERM) 02:16:15.407788 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12717): Terminating (SIGTERM) 02:16:15.448017 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12720): Terminating (SIGTERM) 02:16:15.457406 --- ParallelTerminationStrategy: PID 12708 died... 02:16:15.511396 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12708): Terminated: ok {rc=0} 02:16:15.521050 --- ParallelTerminationStrategy: PID 12709 died... 02:16:15.574302 run iperf3-srv_10.42.42.10(pid=12709): Terminated {rc=256} 02:16:15.584124 --- ParallelTerminationStrategy: PID 12710 died... 02:16:15.638281 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12710): Terminated: ok {rc=0} 02:16:15.647890 --- ParallelTerminationStrategy: PID 12711 died... 02:16:15.701870 run iperf3-srv_10.42.42.10(pid=12711): Terminated {rc=256} 02:16:15.711513 --- ParallelTerminationStrategy: PID 12714 died... 02:16:15.765657 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12714): Terminated: ok {rc=0} 02:16:15.775251 --- ParallelTerminationStrategy: PID 12717 died... 02:16:15.829094 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12717): Terminated: ok {rc=0} 02:16:15.844757 --- ParallelTerminationStrategy: PID 12720 died... 02:16:15.911555 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12720): Terminated: ok {rc=0} 02:16:15.999462 bus /gobi_0: Setting Powered False 02:16:17.106344 bus /gobi_0: Setting Powered False 02:16:18.215235 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12718): Process ended prematurely: osmo-stp_10.42.42.5(pid=12718) [trial-2368↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12718)]