Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=12575): Process ended prematurely: osmo-stp_10.42.42.5(pid=12575) [trial-2368↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12575)]
Standard Output
---------------------------------------------- trial-2368 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 02:14:02.973666 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:02.984826 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:14:03.123259 tst cs_paging_gprs_active.py: using LAC 25277 02:14:03.255776 tst cs_paging_gprs_active.py: using RAC 32 02:14:03.389251 tst cs_paging_gprs_active.py: using CellId 25277 02:14:03.527485 tst cs_paging_gprs_active.py: using BVCI 25278 02:14:03.553327 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:03.564649 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:03.575824 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:03.587625 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:03.599227 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:03.610819 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:03.622849 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:03.634543 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:14:03.646360 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:14:03.769632 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:14:04.061550 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:14:04.193872 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:14:04.523219 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12565): Launched 02:14:04.798189 run iperf3-srv_10.42.42.10(pid=12566): Launched 02:14:04.991037 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:14:05.122786 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:14:05.450809 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12567): Launched 02:14:05.724011 run iperf3-srv_10.42.42.10(pid=12568): Launched 02:14:05.916204 tst cs_paging_gprs_active.py:38: start network... 02:14:06.047220 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:14:06.545785 run create_hlr_db(pid=12569): Launched 02:14:06.726440 bus /gobi_6: Setting Powered False 02:14:07.747787 run create_hlr_db(pid=12569): Terminated: ok {rc=0} 02:14:08.194640 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12571): Launched 02:14:08.534091 run osmo-hlr_10.42.42.2(pid=12572): Launched 02:14:08.658554 run osmo-stp_10.42.42.5: Starting osmo-stp 02:14:09.245786 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12574): Launched 02:14:09.588137 run osmo-stp_10.42.42.5(pid=12575): Launched 02:14:09.710331 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:14:10.298675 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12577): Launched 02:14:10.419000 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:14:10.714442 run patchelf(pid=12578): Launched 02:14:10.910427 run osmo-stp_10.42.42.5(pid=12575): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12575)] 02:14:11.053604 run osmo-stp_10.42.42.5(pid=12575): stdout: | (launched: 2022-12-10_02:14:09.418025) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:14:11.196925 run osmo-stp_10.42.42.5(pid=12575): stderr: | �[0;m�[38;5;43m20221210021409617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210021409617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210021409617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210021409618 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210021409618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210021409618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210021409618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:14:11.336153 run osmo-stp_10.42.42.5(pid=12575): stdout: | (launched: 2022-12-10_02:14:09.418025) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:14:11.473907 run osmo-stp_10.42.42.5(pid=12575): stderr: | �[0;m�[38;5;43m20221210021409617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210021409617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210021409617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210021409618 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210021409618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210021409618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210021409618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:14:11.634225 run patchelf(pid=12578): Terminating (SIGINT) 02:14:11.822204 run patchelf(pid=12578): Terminated: ok {rc=0} 02:14:11.856334 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12575): Process ended prematurely: osmo-stp_10.42.42.5(pid=12575) [trial-2368↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12575)] [trial-2368↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 02:14:11.866236 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 02:14:11.929936 run osmo-hlr_10.42.42.2(pid=12572): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12572)] 02:14:11.981801 run osmo-hlr_10.42.42.2(pid=12572): stdout: | (launched: 2022-12-10_02:14:08.366785) 02:14:12.034457 run osmo-hlr_10.42.42.2(pid=12572): stderr: | �[0;m�[1;31m20221210021408570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210021408570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210021408570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210021408570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210021408570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210021408570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210021408584 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210021408592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210021408593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210021408593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:14:12.079753 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12565): Terminating (SIGTERM) 02:14:12.122432 run iperf3-srv_10.42.42.10(pid=12566): Terminating (SIGTERM) 02:14:12.165051 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12567): Terminating (SIGTERM) 02:14:12.207439 run iperf3-srv_10.42.42.10(pid=12568): Terminating (SIGTERM) 02:14:12.250497 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12571): Terminating (SIGTERM) 02:14:12.293104 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12574): Terminating (SIGTERM) 02:14:12.335821 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12577): Terminating (SIGTERM) 02:14:12.345871 --- ParallelTerminationStrategy: PID 12565 died... 02:14:12.402777 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12565): Terminated: ok {rc=0} 02:14:12.413235 --- ParallelTerminationStrategy: PID 12566 died... 02:14:12.469534 run iperf3-srv_10.42.42.10(pid=12566): Terminated {rc=256} 02:14:12.479929 --- ParallelTerminationStrategy: PID 12567 died... 02:14:12.536254 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12567): Terminated: ok {rc=0} 02:14:12.546681 --- ParallelTerminationStrategy: PID 12568 died... 02:14:12.602926 run iperf3-srv_10.42.42.10(pid=12568): Terminated {rc=256} 02:14:12.613200 --- ParallelTerminationStrategy: PID 12571 died... 02:14:12.669354 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12571): Terminated: ok {rc=0} 02:14:12.679734 --- ParallelTerminationStrategy: PID 12574 died... 02:14:12.736708 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12574): Terminated: ok {rc=0} 02:14:12.746860 --- ParallelTerminationStrategy: PID 12577 died... 02:14:12.803430 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12577): Terminated: ok {rc=0} 02:14:12.891284 bus /gobi_0: Setting Powered False 02:14:13.995310 bus /gobi_0: Setting Powered False 02:14:15.106760 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12575): Process ended prematurely: osmo-stp_10.42.42.5(pid=12575) [trial-2368↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12575)]