Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=14078): Process ended prematurely: osmo-stp_10.42.42.5(pid=14078) [trial-2368↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14078)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 02:31:38.644547 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:38.655353 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 02:31:38.810231 tst cs_paging_gprs_active.py: using LAC 25370 02:31:38.927791 tst cs_paging_gprs_active.py: using RAC 125 02:31:39.048289 tst cs_paging_gprs_active.py: using CellId 25370 02:31:39.169077 tst cs_paging_gprs_active.py: using BVCI 25371 02:31:39.192191 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:39.203003 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:39.213646 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:39.224447 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:39.235199 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:39.246166 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:39.257012 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:39.267743 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:39.278780 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:31:39.399474 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:31:39.678920 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:31:39.806015 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:31:40.120228 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14068): Launched 02:31:40.381928 run iperf3-srv_10.42.42.10(pid=14069): Launched 02:31:40.566706 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:31:40.693133 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:31:41.007401 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14070): Launched 02:31:41.269355 run iperf3-srv_10.42.42.10(pid=14071): Launched 02:31:41.454400 tst cs_paging_gprs_active.py:38: start network... 02:31:41.580772 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:31:42.058821 run create_hlr_db(pid=14072): Launched 02:31:42.233127 bus /gobi_6: Setting Powered False 02:31:43.255127 run create_hlr_db(pid=14072): Terminated: ok {rc=0} 02:31:43.687006 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14074): Launched 02:31:44.014106 run osmo-hlr_10.42.42.2(pid=14075): Launched 02:31:44.133160 run osmo-stp_10.42.42.5: Starting osmo-stp 02:31:44.698272 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14077): Launched 02:31:45.024465 run osmo-stp_10.42.42.5(pid=14078): Launched 02:31:45.143402 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:31:45.710389 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14080): Launched 02:31:45.827448 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:31:46.148113 run patchelf(pid=14081): Launched 02:31:46.341723 run osmo-stp_10.42.42.5(pid=14078): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14078)] 02:31:46.485888 run osmo-stp_10.42.42.5(pid=14078): stdout: | (launched: 2022-12-10_02:31:44.864089) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:31:46.628213 run osmo-stp_10.42.42.5(pid=14078): stderr: | �[0;m�[38;5;43m20221210023145058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210023145058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210023145058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210023145059 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210023145059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210023145059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210023145059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:31:46.766316 run osmo-stp_10.42.42.5(pid=14078): stdout: | (launched: 2022-12-10_02:31:44.864089) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:31:46.903089 run osmo-stp_10.42.42.5(pid=14078): stderr: | �[0;m�[38;5;43m20221210023145058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210023145058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210023145058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210023145059 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210023145059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210023145059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210023145059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:31:47.061914 run patchelf(pid=14081): Terminating (SIGINT) 02:31:47.245927 run patchelf(pid=14081): Terminated: ok {rc=0} 02:31:47.279579 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14078): Process ended prematurely: osmo-stp_10.42.42.5(pid=14078) [trial-2368↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14078)] [trial-2368↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 02:31:47.289596 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 02:31:47.352422 run osmo-hlr_10.42.42.2(pid=14075): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14075)] 02:31:47.403854 run osmo-hlr_10.42.42.2(pid=14075): stdout: | (launched: 2022-12-10_02:31:43.853718) 02:31:47.455941 run osmo-hlr_10.42.42.2(pid=14075): stderr: | �[0;m�[1;31m20221210023144054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210023144054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210023144054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210023144054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210023144054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210023144054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210023144066 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210023144074 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210023144075 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210023144075 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:31:47.500757 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14068): Terminating (SIGTERM) 02:31:47.542558 run iperf3-srv_10.42.42.10(pid=14069): Terminating (SIGTERM) 02:31:47.584337 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14070): Terminating (SIGTERM) 02:31:47.626033 run iperf3-srv_10.42.42.10(pid=14071): Terminating (SIGTERM) 02:31:47.667831 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14074): Terminating (SIGTERM) 02:31:47.709595 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14077): Terminating (SIGTERM) 02:31:47.751656 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14080): Terminating (SIGTERM) 02:31:47.761398 --- ParallelTerminationStrategy: PID 14068 died... 02:31:47.817436 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14068): Terminated: ok {rc=0} 02:31:47.827433 --- ParallelTerminationStrategy: PID 14069 died... 02:31:47.882880 run iperf3-srv_10.42.42.10(pid=14069): Terminated {rc=256} 02:31:47.892901 --- ParallelTerminationStrategy: PID 14070 died... 02:31:47.948853 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14070): Terminated: ok {rc=0} 02:31:47.959205 --- ParallelTerminationStrategy: PID 14071 died... 02:31:48.014859 run iperf3-srv_10.42.42.10(pid=14071): Terminated {rc=256} 02:31:48.024805 --- ParallelTerminationStrategy: PID 14074 died... 02:31:48.080402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14074): Terminated: ok {rc=0} 02:31:48.090527 --- ParallelTerminationStrategy: PID 14077 died... 02:31:48.146330 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14077): Terminated: ok {rc=0} 02:31:48.156423 --- ParallelTerminationStrategy: PID 14080 died... 02:31:48.212125 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14080): Terminated: ok {rc=0} 02:31:48.300296 bus /gobi_0: Setting Powered False 02:31:49.406329 bus /gobi_0: Setting Powered False 02:31:50.513760 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14078): Process ended prematurely: osmo-stp_10.42.42.5(pid=14078) [trial-2368↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14078)]