Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=14149): Process ended prematurely: osmo-stp_10.42.42.5(pid=14149) [trial-2368↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14149)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:32:39.032175 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:32:39.043452 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:32:39.210306 tst cs_paging_gprs_active.py: using LAC 25375 02:32:39.337716 tst cs_paging_gprs_active.py: using RAC 130 02:32:39.470336 tst cs_paging_gprs_active.py: using CellId 25375 02:32:39.596485 tst cs_paging_gprs_active.py: using BVCI 25376 02:32:39.621367 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:32:39.632574 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:32:39.643709 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:32:39.654847 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:32:39.665946 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:32:39.677071 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:32:39.688329 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:32:39.699404 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:32:39.710626 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:32:39.828063 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:32:40.109908 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:32:40.237205 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:32:40.552382 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14139): Launched 02:32:40.815069 run iperf3-srv_10.42.42.10(pid=14140): Launched 02:32:41.000692 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:32:41.127724 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:32:41.443310 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14141): Launched 02:32:41.706581 run iperf3-srv_10.42.42.10(pid=14142): Launched 02:32:41.892278 tst cs_paging_gprs_active.py:38: start network... 02:32:42.019163 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:32:42.501667 run create_hlr_db(pid=14143): Launched 02:32:42.676898 bus /gobi_6: Setting Powered False 02:32:43.699031 run create_hlr_db(pid=14143): Terminated: ok {rc=0} 02:32:44.131707 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14145): Launched 02:32:44.458484 run osmo-hlr_10.42.42.2(pid=14146): Launched 02:32:44.578893 run osmo-stp_10.42.42.5: Starting osmo-stp 02:32:45.144299 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14148): Launched 02:32:45.471517 run osmo-stp_10.42.42.5(pid=14149): Launched 02:32:45.592350 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:32:46.206078 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14151): Launched 02:32:46.343395 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:32:46.650324 run patchelf(pid=14152): Launched 02:32:46.844121 run osmo-stp_10.42.42.5(pid=14149): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14149)] 02:32:46.985786 run osmo-stp_10.42.42.5(pid=14149): stdout: | (launched: 2022-12-10_02:32:45.310440) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:32:47.127694 run osmo-stp_10.42.42.5(pid=14149): stderr: | �[0;m�[38;5;43m20221210023245502 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210023245502 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210023245503 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210023245503 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210023245505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210023245506 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210023245506 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:32:47.264457 run osmo-stp_10.42.42.5(pid=14149): stdout: | (launched: 2022-12-10_02:32:45.310440) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:32:47.398302 run osmo-stp_10.42.42.5(pid=14149): stderr: | �[0;m�[38;5;43m20221210023245502 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210023245502 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210023245503 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210023245503 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210023245505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210023245506 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210023245506 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:32:47.554266 run patchelf(pid=14152): Terminating (SIGINT) 02:32:47.737097 run patchelf(pid=14152): Terminated: ok {rc=0} 02:32:47.770707 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14149): Process ended prematurely: osmo-stp_10.42.42.5(pid=14149) [trial-2368↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14149)] [trial-2368↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:32:47.780842 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 02:32:47.844095 run osmo-hlr_10.42.42.2(pid=14146): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14146)] 02:32:47.895557 run osmo-hlr_10.42.42.2(pid=14146): stdout: | (launched: 2022-12-10_02:32:44.297692) 02:32:47.948690 run osmo-hlr_10.42.42.2(pid=14146): stderr: | �[0;m�[1;31m20221210023244497 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210023244497 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210023244497 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210023244497 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210023244497 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210023244497 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210023244511 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210023244519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210023244519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210023244519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:32:47.992875 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14139): Terminating (SIGTERM) 02:32:48.034513 run iperf3-srv_10.42.42.10(pid=14140): Terminating (SIGTERM) 02:32:48.076188 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14141): Terminating (SIGTERM) 02:32:48.117895 run iperf3-srv_10.42.42.10(pid=14142): Terminating (SIGTERM) 02:32:48.159500 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14145): Terminating (SIGTERM) 02:32:48.201427 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14148): Terminating (SIGTERM) 02:32:48.243074 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14151): Terminating (SIGTERM) 02:32:48.252625 --- ParallelTerminationStrategy: PID 14139 died... 02:32:48.308313 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14139): Terminated: ok {rc=0} 02:32:48.318297 --- ParallelTerminationStrategy: PID 14140 died... 02:32:48.373627 run iperf3-srv_10.42.42.10(pid=14140): Terminated {rc=256} 02:32:48.383565 --- ParallelTerminationStrategy: PID 14141 died... 02:32:48.439396 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14141): Terminated: ok {rc=0} 02:32:48.449829 --- ParallelTerminationStrategy: PID 14142 died... 02:32:48.505051 run iperf3-srv_10.42.42.10(pid=14142): Terminated {rc=256} 02:32:48.514971 --- ParallelTerminationStrategy: PID 14145 died... 02:32:48.579628 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14145): Terminated: ok {rc=0} 02:32:48.590158 --- ParallelTerminationStrategy: PID 14148 died... 02:32:48.652651 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14148): Terminated: ok {rc=0} 02:32:48.663636 --- ParallelTerminationStrategy: PID 14151 died... 02:32:48.723266 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14151): Terminated: ok {rc=0} 02:32:48.811246 bus /gobi_0: Setting Powered False 02:32:49.918372 bus /gobi_0: Setting Powered False 02:32:51.029694 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14149): Process ended prematurely: osmo-stp_10.42.42.5(pid=14149) [trial-2368↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14149)]