Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=17433): Process ended prematurely: osmo-stp_10.42.42.5(pid=17433) [trial-2368↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17433)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 03:03:35.448791 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:03:35.460185 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 03:03:35.602391 tst cs_paging_gprs_active.py: using LAC 25540 03:03:35.731822 tst cs_paging_gprs_active.py: using RAC 40 03:03:35.855059 tst cs_paging_gprs_active.py: using CellId 25540 03:03:35.975839 tst cs_paging_gprs_active.py: using BVCI 25541 03:03:35.999285 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:03:36.010108 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:03:36.020710 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:03:36.032099 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:03:36.043359 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:03:36.054508 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:03:36.065962 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:03:36.077113 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:03:36.088558 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 03:03:36.211585 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 03:03:36.510780 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:03:36.648526 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:03:36.989697 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17423): Launched 03:03:37.272870 run iperf3-srv_10.42.42.10(pid=17424): Launched 03:03:37.473459 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:03:37.610643 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:03:37.949932 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17425): Launched 03:03:38.233481 run iperf3-srv_10.42.42.10(pid=17426): Launched 03:03:38.434562 tst cs_paging_gprs_active.py:38: start network... 03:03:38.571709 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:03:39.098091 run create_hlr_db(pid=17427): Launched 03:03:39.287325 bus /sierra_2: Setting Powered False 03:03:40.309975 run create_hlr_db(pid=17427): Terminated: ok {rc=0} 03:03:40.722763 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17429): Launched 03:03:41.031023 run osmo-hlr_10.42.42.2(pid=17430): Launched 03:03:41.147867 run osmo-stp_10.42.42.5: Starting osmo-stp 03:03:41.679755 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17432): Launched 03:03:41.989190 run osmo-stp_10.42.42.5(pid=17433): Launched 03:03:42.102253 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:03:42.637364 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17435): Launched 03:03:42.746850 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:03:43.015140 run patchelf(pid=17436): Launched 03:03:43.194940 run osmo-stp_10.42.42.5(pid=17433): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17433)] 03:03:43.326587 run osmo-stp_10.42.42.5(pid=17433): stdout: | (launched: 2022-12-10_03:03:41.836001) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:03:43.458574 run osmo-stp_10.42.42.5(pid=17433): stderr: | �[0;m�[38;5;43m20221210030342006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210030342006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210030342006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210030342007 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210030342007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210030342007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210030342007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:03:43.585846 run osmo-stp_10.42.42.5(pid=17433): stdout: | (launched: 2022-12-10_03:03:41.836001) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:03:43.712058 run osmo-stp_10.42.42.5(pid=17433): stderr: | �[0;m�[38;5;43m20221210030342006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210030342006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210030342006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210030342007 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210030342007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210030342007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210030342007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:03:43.858995 run patchelf(pid=17436): Terminating (SIGINT) 03:03:44.031179 run patchelf(pid=17436): Terminated: ok {rc=0} 03:03:44.062709 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17433): Process ended prematurely: osmo-stp_10.42.42.5(pid=17433) [trial-2368↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17433)] [trial-2368↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 03:03:44.071912 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 03:03:44.133457 run osmo-hlr_10.42.42.2(pid=17430): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17430)] 03:03:44.183035 run osmo-hlr_10.42.42.2(pid=17430): stdout: | (launched: 2022-12-10_03:03:40.878268) 03:03:44.233335 run osmo-hlr_10.42.42.2(pid=17430): stderr: | �[0;m�[1;31m20221210030341057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210030341057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210030341057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210030341057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210030341057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210030341057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210030341070 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210030341079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210030341079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210030341079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:03:44.276348 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17423): Terminating (SIGTERM) 03:03:44.316574 run iperf3-srv_10.42.42.10(pid=17424): Terminating (SIGTERM) 03:03:44.356896 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17425): Terminating (SIGTERM) 03:03:44.397511 run iperf3-srv_10.42.42.10(pid=17426): Terminating (SIGTERM) 03:03:44.437888 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17429): Terminating (SIGTERM) 03:03:44.477871 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17432): Terminating (SIGTERM) 03:03:44.518284 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17435): Terminating (SIGTERM) 03:03:44.527959 --- ParallelTerminationStrategy: PID 17423 died... 03:03:44.582281 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17423): Terminated: ok {rc=0} 03:03:44.592288 --- ParallelTerminationStrategy: PID 17424 died... 03:03:44.646236 run iperf3-srv_10.42.42.10(pid=17424): Terminated {rc=256} 03:03:44.656357 --- ParallelTerminationStrategy: PID 17425 died... 03:03:44.710205 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17425): Terminated: ok {rc=0} 03:03:44.720232 --- ParallelTerminationStrategy: PID 17426 died... 03:03:44.774429 run iperf3-srv_10.42.42.10(pid=17426): Terminated {rc=256} 03:03:44.784293 --- ParallelTerminationStrategy: PID 17429 died... 03:03:44.838515 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17429): Terminated: ok {rc=0} 03:03:44.848614 --- ParallelTerminationStrategy: PID 17432 died... 03:03:44.902658 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17432): Terminated: ok {rc=0} 03:03:44.912394 --- ParallelTerminationStrategy: PID 17435 died... 03:03:44.966394 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17435): Terminated: ok {rc=0} 03:03:45.055531 bus /gobi_0: Setting Powered False 03:03:46.176736 bus /gobi_0: Setting Powered False 03:03:47.288451 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17433): Process ended prematurely: osmo-stp_10.42.42.5(pid=17433) [trial-2368↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17433)]