Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=15039): Process ended prematurely: osmo-stp_10.42.42.5(pid=15039) [trial-2368↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15039)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:41:32.492289 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:32.503522 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:41:32.661258 tst cs_paging_gprs_active.py: using LAC 25422 02:41:32.780209 tst cs_paging_gprs_active.py: using RAC 177 02:41:32.900379 tst cs_paging_gprs_active.py: using CellId 25422 02:41:33.018242 tst cs_paging_gprs_active.py: using BVCI 25423 02:41:33.041742 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:33.052619 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:33.063470 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:33.074708 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:33.086017 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:33.097439 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:33.108993 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:33.120080 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:33.131772 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:41:33.249318 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:41:33.531680 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:41:33.659183 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:41:33.975657 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15029): Launched 02:41:34.238945 run iperf3-srv_10.42.42.10(pid=15030): Launched 02:41:34.424896 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:41:34.552281 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:41:34.867500 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15031): Launched 02:41:35.129439 run iperf3-srv_10.42.42.10(pid=15032): Launched 02:41:35.314404 tst cs_paging_gprs_active.py:38: start network... 02:41:35.441092 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:41:35.919791 run create_hlr_db(pid=15033): Launched 02:41:36.094926 bus /gobi_6: Setting Powered False 02:41:37.115890 run create_hlr_db(pid=15033): Terminated: ok {rc=0} 02:41:37.545630 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15035): Launched 02:41:37.850540 run osmo-hlr_10.42.42.2(pid=15036): Launched 02:41:37.967483 run osmo-stp_10.42.42.5: Starting osmo-stp 02:41:38.501781 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15038): Launched 02:41:38.806057 run osmo-stp_10.42.42.5(pid=15039): Launched 02:41:38.917567 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:41:39.445608 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15041): Launched 02:41:39.554457 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:41:39.819584 run patchelf(pid=15042): Launched 02:41:39.997685 run osmo-stp_10.42.42.5(pid=15039): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15039)] 02:41:40.127821 run osmo-stp_10.42.42.5(pid=15039): stdout: | (launched: 2022-12-10_02:41:38.655680) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:41:40.258418 run osmo-stp_10.42.42.5(pid=15039): stderr: | �[0;m�[38;5;43m20221210024138825 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210024138825 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210024138826 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210024138826 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210024138827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210024138827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210024138827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:41:40.384233 run osmo-stp_10.42.42.5(pid=15039): stdout: | (launched: 2022-12-10_02:41:38.655680) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:41:40.509990 run osmo-stp_10.42.42.5(pid=15039): stderr: | �[0;m�[38;5;43m20221210024138825 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210024138825 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210024138826 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210024138826 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210024138827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210024138827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210024138827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:41:40.655612 run patchelf(pid=15042): Terminating (SIGINT) 02:41:40.826424 run patchelf(pid=15042): Terminated: ok {rc=0} 02:41:40.857856 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15039): Process ended prematurely: osmo-stp_10.42.42.5(pid=15039) [trial-2368↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15039)] [trial-2368↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:41:40.866993 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 02:41:40.928180 run osmo-hlr_10.42.42.2(pid=15036): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15036)] 02:41:40.977774 run osmo-hlr_10.42.42.2(pid=15036): stdout: | (launched: 2022-12-10_02:41:37.700028) 02:41:41.028123 run osmo-hlr_10.42.42.2(pid=15036): stderr: | �[0;m�[1;31m20221210024137879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210024137879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210024137879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210024137879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210024137879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210024137879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210024137902 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210024137911 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210024137911 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210024137911 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:41:41.070579 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15029): Terminating (SIGTERM) 02:41:41.110880 run iperf3-srv_10.42.42.10(pid=15030): Terminating (SIGTERM) 02:41:41.151552 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15031): Terminating (SIGTERM) 02:41:41.191762 run iperf3-srv_10.42.42.10(pid=15032): Terminating (SIGTERM) 02:41:41.232022 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15035): Terminating (SIGTERM) 02:41:41.272168 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15038): Terminating (SIGTERM) 02:41:41.312617 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15041): Terminating (SIGTERM) 02:41:41.322269 --- ParallelTerminationStrategy: PID 15029 died... 02:41:41.376254 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15029): Terminated: ok {rc=0} 02:41:41.386363 --- ParallelTerminationStrategy: PID 15030 died... 02:41:41.440331 run iperf3-srv_10.42.42.10(pid=15030): Terminated {rc=256} 02:41:41.450063 --- ParallelTerminationStrategy: PID 15031 died... 02:41:41.503611 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15031): Terminated: ok {rc=0} 02:41:41.513811 --- ParallelTerminationStrategy: PID 15032 died... 02:41:41.567514 run iperf3-srv_10.42.42.10(pid=15032): Terminated {rc=256} 02:41:41.577319 --- ParallelTerminationStrategy: PID 15035 died... 02:41:41.631243 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15035): Terminated: ok {rc=0} 02:41:41.641152 --- ParallelTerminationStrategy: PID 15038 died... 02:41:41.695279 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15038): Terminated: ok {rc=0} 02:41:41.704936 --- ParallelTerminationStrategy: PID 15041 died... 02:41:41.758986 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15041): Terminated: ok {rc=0} 02:41:41.844106 bus /gobi_0: Setting Powered False 02:41:42.951496 bus /gobi_0: Setting Powered False 02:41:44.059484 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15039): Process ended prematurely: osmo-stp_10.42.42.5(pid=15039) [trial-2368↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15039)]