Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=14901): Process ended prematurely: osmo-stp_10.42.42.5(pid=14901) [trial-2368↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14901)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 02:39:32.328178 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:32.339112 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:39:32.478225 tst cs_paging_gprs_active.py: using LAC 25412 02:39:32.610795 tst cs_paging_gprs_active.py: using RAC 167 02:39:32.731287 tst cs_paging_gprs_active.py: using CellId 25412 02:39:32.848800 tst cs_paging_gprs_active.py: using BVCI 25413 02:39:32.872164 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:32.883073 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:32.893809 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:32.904702 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:32.915523 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:32.926456 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:32.937482 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:32.948332 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:32.959395 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:39:33.080542 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:39:33.360038 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:39:33.486974 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:39:33.800592 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14891): Launched 02:39:34.062803 run iperf3-srv_10.42.42.10(pid=14892): Launched 02:39:34.248336 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:39:34.374911 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:39:34.689621 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14893): Launched 02:39:34.952555 run iperf3-srv_10.42.42.10(pid=14894): Launched 02:39:35.137849 tst cs_paging_gprs_active.py:38: start network... 02:39:35.264385 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:39:35.744241 run create_hlr_db(pid=14895): Launched 02:39:35.919182 bus /gobi_6: Setting Powered False 02:39:36.953418 run create_hlr_db(pid=14895): Terminated: ok {rc=0} 02:39:37.361948 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14897): Launched 02:39:37.667398 run osmo-hlr_10.42.42.2(pid=14898): Launched 02:39:37.786901 run osmo-stp_10.42.42.5: Starting osmo-stp 02:39:38.320907 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14900): Launched 02:39:38.627439 run osmo-stp_10.42.42.5(pid=14901): Launched 02:39:38.739522 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:39:39.269922 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14903): Launched 02:39:39.378199 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:39:39.643446 run patchelf(pid=14904): Launched 02:39:39.821406 run osmo-stp_10.42.42.5(pid=14901): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14901)] 02:39:39.951350 run osmo-stp_10.42.42.5(pid=14901): stdout: | (launched: 2022-12-10_02:39:38.475619) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:39:40.081839 run osmo-stp_10.42.42.5(pid=14901): stderr: | �[0;m�[38;5;43m20221210023938645 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210023938646 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210023938646 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210023938646 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210023938647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210023938647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210023938647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:39:40.207995 run osmo-stp_10.42.42.5(pid=14901): stdout: | (launched: 2022-12-10_02:39:38.475619) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:39:40.333486 run osmo-stp_10.42.42.5(pid=14901): stderr: | �[0;m�[38;5;43m20221210023938645 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210023938646 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210023938646 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210023938646 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210023938647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210023938647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210023938647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:39:40.478489 run patchelf(pid=14904): Terminating (SIGINT) 02:39:40.648868 run patchelf(pid=14904): Terminated: ok {rc=0} 02:39:40.680196 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14901): Process ended prematurely: osmo-stp_10.42.42.5(pid=14901) [trial-2368↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14901)] [trial-2368↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 02:39:40.689307 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 02:39:40.749976 run osmo-hlr_10.42.42.2(pid=14898): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14898)] 02:39:40.799207 run osmo-hlr_10.42.42.2(pid=14898): stdout: | (launched: 2022-12-10_02:39:37.516854) 02:39:40.849650 run osmo-hlr_10.42.42.2(pid=14898): stderr: | �[0;m�[1;31m20221210023937695 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210023937695 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210023937695 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210023937695 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210023937695 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210023937695 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210023937708 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210023937717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210023937717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210023937717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:39:40.891795 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14891): Terminating (SIGTERM) 02:39:40.931714 run iperf3-srv_10.42.42.10(pid=14892): Terminating (SIGTERM) 02:39:40.971697 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14893): Terminating (SIGTERM) 02:39:41.011491 run iperf3-srv_10.42.42.10(pid=14894): Terminating (SIGTERM) 02:39:41.051434 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14897): Terminating (SIGTERM) 02:39:41.091394 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14900): Terminating (SIGTERM) 02:39:41.131290 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14903): Terminating (SIGTERM) 02:39:41.140618 --- ParallelTerminationStrategy: PID 14891 died... 02:39:41.194328 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14891): Terminated: ok {rc=0} 02:39:41.203855 --- ParallelTerminationStrategy: PID 14892 died... 02:39:41.256766 run iperf3-srv_10.42.42.10(pid=14892): Terminated {rc=256} 02:39:41.266483 --- ParallelTerminationStrategy: PID 14893 died... 02:39:41.319461 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14893): Terminated: ok {rc=0} 02:39:41.329198 --- ParallelTerminationStrategy: PID 14894 died... 02:39:41.382242 run iperf3-srv_10.42.42.10(pid=14894): Terminated {rc=256} 02:39:41.391932 --- ParallelTerminationStrategy: PID 14897 died... 02:39:41.444870 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14897): Terminated: ok {rc=0} 02:39:41.454619 --- ParallelTerminationStrategy: PID 14900 died... 02:39:41.507581 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14900): Terminated: ok {rc=0} 02:39:41.517342 --- ParallelTerminationStrategy: PID 14903 died... 02:39:41.570641 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14903): Terminated: ok {rc=0} 02:39:41.654709 bus /gobi_0: Setting Powered False 02:39:42.762427 bus /gobi_0: Setting Powered False 02:39:43.870135 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14901): Process ended prematurely: osmo-stp_10.42.42.5(pid=14901) [trial-2368↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14901)]