Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=15543): Process ended prematurely: osmo-stp_10.42.42.5(pid=15543) [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15543)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 02:48:47.588936 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:47.599994 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 02:48:47.765218 tst cs_paging_gprs_active.py: using LAC 25461 02:48:47.894496 tst cs_paging_gprs_active.py: using RAC 216 02:48:48.021522 tst cs_paging_gprs_active.py: using CellId 25461 02:48:48.148818 tst cs_paging_gprs_active.py: using BVCI 25462 02:48:48.174227 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:48.186012 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:48.197785 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:48.209322 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:48.220569 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:48.231780 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:48.243582 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:48.254860 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:48.266232 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:48:48.386231 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:48:48.667808 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:48:48.795472 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:48:49.113431 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15533): Launched 02:48:49.378286 run iperf3-srv_10.42.42.10(pid=15534): Launched 02:48:49.563934 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:48:49.690806 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:48:50.008028 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15535): Launched 02:48:50.271512 run iperf3-srv_10.42.42.10(pid=15536): Launched 02:48:50.457174 tst cs_paging_gprs_active.py:38: start network... 02:48:50.583980 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:48:51.065695 run create_hlr_db(pid=15537): Launched 02:48:51.241542 bus /gobi_6: Setting Powered False 02:48:52.263559 run create_hlr_db(pid=15537): Terminated: ok {rc=0} 02:48:52.670726 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15539): Launched 02:48:52.978189 run osmo-hlr_10.42.42.2(pid=15540): Launched 02:48:53.090431 run osmo-stp_10.42.42.5: Starting osmo-stp 02:48:53.620802 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15542): Launched 02:48:53.928124 run osmo-stp_10.42.42.5(pid=15543): Launched 02:48:54.050397 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:48:54.587875 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15545): Launched 02:48:54.697577 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:48:54.972589 run patchelf(pid=15546): Launched 02:48:55.152284 run osmo-stp_10.42.42.5(pid=15543): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15543)] 02:48:55.283956 run osmo-stp_10.42.42.5(pid=15543): stdout: | (launched: 2022-12-10_02:48:53.776517) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:48:55.415531 run osmo-stp_10.42.42.5(pid=15543): stderr: | �[0;m�[38;5;43m20221210024853951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210024853951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210024853951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210024853952 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210024853952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210024853952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210024853952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:48:55.542736 run osmo-stp_10.42.42.5(pid=15543): stdout: | (launched: 2022-12-10_02:48:53.776517) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:48:55.669395 run osmo-stp_10.42.42.5(pid=15543): stderr: | �[0;m�[38;5;43m20221210024853951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210024853951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210024853951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210024853952 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210024853952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210024853952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210024853952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:48:55.816351 run patchelf(pid=15546): Terminating (SIGINT) 02:48:55.988921 run patchelf(pid=15546): Terminated: ok {rc=0} 02:48:56.020767 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15543): Process ended prematurely: osmo-stp_10.42.42.5(pid=15543) [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15543)] [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 02:48:56.030060 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 02:48:56.090766 run osmo-hlr_10.42.42.2(pid=15540): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15540)] 02:48:56.139539 run osmo-hlr_10.42.42.2(pid=15540): stdout: | (launched: 2022-12-10_02:48:52.826585) 02:48:56.189198 run osmo-hlr_10.42.42.2(pid=15540): stderr: | �[0;m�[1;31m20221210024853004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210024853004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210024853004 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210024853005 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210024853005 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210024853005 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210024853017 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210024853025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210024853025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210024853025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:48:56.231026 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15533): Terminating (SIGTERM) 02:48:56.270481 run iperf3-srv_10.42.42.10(pid=15534): Terminating (SIGTERM) 02:48:56.310167 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15535): Terminating (SIGTERM) 02:48:56.349885 run iperf3-srv_10.42.42.10(pid=15536): Terminating (SIGTERM) 02:48:56.389543 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15539): Terminating (SIGTERM) 02:48:56.429403 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15542): Terminating (SIGTERM) 02:48:56.469196 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15545): Terminating (SIGTERM) 02:48:56.478693 --- ParallelTerminationStrategy: PID 15533 died... 02:48:56.532111 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15533): Terminated: ok {rc=0} 02:48:56.541879 --- ParallelTerminationStrategy: PID 15534 died... 02:48:56.594831 run iperf3-srv_10.42.42.10(pid=15534): Terminated {rc=256} 02:48:56.604399 --- ParallelTerminationStrategy: PID 15535 died... 02:48:56.657035 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15535): Terminated: ok {rc=0} 02:48:56.666993 --- ParallelTerminationStrategy: PID 15536 died... 02:48:56.719930 run iperf3-srv_10.42.42.10(pid=15536): Terminated {rc=256} 02:48:56.729915 --- ParallelTerminationStrategy: PID 15539 died... 02:48:56.782895 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15539): Terminated: ok {rc=0} 02:48:56.792800 --- ParallelTerminationStrategy: PID 15542 died... 02:48:56.845794 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15542): Terminated: ok {rc=0} 02:48:56.855766 --- ParallelTerminationStrategy: PID 15545 died... 02:48:56.908582 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15545): Terminated: ok {rc=0} 02:48:56.992239 bus /gobi_0: Setting Powered False 02:48:58.098407 bus /gobi_0: Setting Powered False 02:48:59.211151 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15543): Process ended prematurely: osmo-stp_10.42.42.5(pid=15543) [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15543)]