Failed
dynts:trx-umtrx+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-umtrx+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3272): Process ended prematurely: osmo-stp_10.42.42.5(pid=3272) [trial-2370↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3272)]
Standard Output
---------------------------------------------- trial-2370 dynts:trx-umtrx+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 06:12:20.056585 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:20.067844 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 06:12:20.223372 tst switch_tch_pdch.py: using LAC 26399 06:12:20.354677 tst switch_tch_pdch.py: using RAC 134 06:12:20.478164 tst switch_tch_pdch.py: using CellId 26399 06:12:20.596511 tst switch_tch_pdch.py: using BVCI 26400 06:12:20.620306 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:20.631506 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:20.642588 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:20.653690 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:20.664804 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:20.675828 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:20.686974 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 06:12:20.698045 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 06:12:20.815714 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 06:12:21.090776 tst switch_tch_pdch.py:51: start network... 06:12:21.209017 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:12:21.633175 run create_hlr_db(pid=3266): Launched 06:12:21.749773 bus /gobi_6: Setting Powered False 06:12:22.818600 run create_hlr_db(pid=3266): Terminated: ok {rc=0} 06:12:23.174709 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3268): Launched 06:12:23.458174 run osmo-hlr_10.42.42.2(pid=3269): Launched 06:12:23.559896 run osmo-stp_10.42.42.5: Starting osmo-stp 06:12:24.029383 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3271): Launched 06:12:24.314266 run osmo-stp_10.42.42.5(pid=3272): Launched 06:12:24.417952 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:12:24.891208 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3274): Launched 06:12:24.992392 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:12:25.241857 run patchelf(pid=3275): Launched 06:12:25.409960 run osmo-stp_10.42.42.5(pid=3272): ERR: Terminated: ERROR {rc=1} [trial-2370↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3272)] 06:12:25.533165 run osmo-stp_10.42.42.5(pid=3272): stdout: | (launched: 2022-12-10_06:12:24.173906) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:12:25.656842 run osmo-stp_10.42.42.5(pid=3272): stderr: | �[0;m�[38;5;43m20221210061224341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210061224341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210061224341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210061224341 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210061224342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210061224342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210061224342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:12:25.775618 run osmo-stp_10.42.42.5(pid=3272): stdout: | (launched: 2022-12-10_06:12:24.173906) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:12:25.893268 run osmo-stp_10.42.42.5(pid=3272): stderr: | �[0;m�[38;5;43m20221210061224341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210061224341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210061224341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210061224341 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210061224342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210061224342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210061224342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:12:26.030373 run patchelf(pid=3275): Terminating (SIGINT) 06:12:26.191245 run patchelf(pid=3275): Terminated: ok {rc=0} 06:12:26.220758 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=3272): Process ended prematurely: osmo-stp_10.42.42.5(pid=3272) [trial-2370↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3272)] [trial-2370↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 06:12:26.229337 tst switch_tch_pdch.py:54: Test FAILED (6.2 sec) 06:12:26.288001 run osmo-hlr_10.42.42.2(pid=3269): ERR: Terminated: ERROR {rc=237} [trial-2370↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3269)] 06:12:26.335976 run osmo-hlr_10.42.42.2(pid=3269): stdout: | (launched: 2022-12-10_06:12:23.318184) 06:12:26.384811 run osmo-hlr_10.42.42.2(pid=3269): stderr: | �[0;m�[1;31m20221210061223492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210061223492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210061223492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210061223492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210061223492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210061223492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210061223504 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/dynts:trx-umtrx+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210061223512 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210061223513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210061223513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:12:26.425608 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3268): Terminating (SIGTERM) 06:12:26.464336 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3271): Terminating (SIGTERM) 06:12:26.503056 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3274): Terminating (SIGTERM) 06:12:26.512187 --- ParallelTerminationStrategy: PID 3268 died... 06:12:26.564138 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3268): Terminated: ok {rc=0} 06:12:26.573845 --- ParallelTerminationStrategy: PID 3271 died... 06:12:26.626145 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3271): Terminated: ok {rc=0} 06:12:26.635710 --- ParallelTerminationStrategy: PID 3274 died... 06:12:26.687947 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3274): Terminated: ok {rc=0} 06:12:26.770574 bus /gobi_0: Setting Powered False 06:12:27.876482 bus /gobi_0: Setting Powered False 06:12:28.982233 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3272): Process ended prematurely: osmo-stp_10.42.42.5(pid=3272) [trial-2370↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3272)]