Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=6305): Process ended prematurely: osmo-stp_10.42.42.5(pid=6305) [trial-2370↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6305)]
Standard Output
---------------------------------------------- trial-2370 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 06:39:47.802072 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:39:47.813368 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 06:39:47.949574 tst cs_paging_gprs_active.py: using LAC 26548 06:39:48.069924 tst cs_paging_gprs_active.py: using RAC 28 06:39:48.185088 tst cs_paging_gprs_active.py: using CellId 26548 06:39:48.306051 tst cs_paging_gprs_active.py: using BVCI 26549 06:39:48.329927 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:39:48.342117 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:39:48.354141 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:39:48.365768 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:39:48.377448 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:39:48.388770 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:39:48.400609 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:39:48.412266 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:39:48.424346 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 06:39:48.544392 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 06:39:48.829967 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:39:48.960374 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:39:49.284868 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6295): Launched 06:39:49.556282 run iperf3-srv_10.42.42.10(pid=6296): Launched 06:39:49.747310 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:39:49.877513 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:39:50.202330 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6297): Launched 06:39:50.472782 run iperf3-srv_10.42.42.10(pid=6298): Launched 06:39:50.664308 tst cs_paging_gprs_active.py:38: start network... 06:39:50.794824 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:39:51.299629 run create_hlr_db(pid=6299): Launched 06:39:51.481744 bus /gobi_6: Setting Powered False 06:39:52.502781 run create_hlr_db(pid=6299): Terminated: ok {rc=0} 06:39:52.921581 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6301): Launched 06:39:53.236408 run osmo-hlr_10.42.42.2(pid=6302): Launched 06:39:53.350484 run osmo-stp_10.42.42.5: Starting osmo-stp 06:39:53.897495 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6304): Launched 06:39:54.211909 run osmo-stp_10.42.42.5(pid=6305): Launched 06:39:54.325925 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:39:54.874665 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6307): Launched 06:39:54.986616 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:39:55.261472 run patchelf(pid=6308): Launched 06:39:55.446011 run osmo-stp_10.42.42.5(pid=6305): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6305)] 06:39:55.580719 run osmo-stp_10.42.42.5(pid=6305): stdout: | (launched: 2022-12-10_06:39:54.057226) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:39:55.715862 run osmo-stp_10.42.42.5(pid=6305): stderr: | �[0;m�[38;5;43m20221210063954249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210063954249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210063954249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210063954250 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210063954250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210063954250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210063954250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:39:55.846251 run osmo-stp_10.42.42.5(pid=6305): stdout: | (launched: 2022-12-10_06:39:54.057226) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:39:55.975616 run osmo-stp_10.42.42.5(pid=6305): stderr: | �[0;m�[38;5;43m20221210063954249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210063954249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210063954249 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210063954250 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210063954250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210063954250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210063954250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:39:56.125854 run patchelf(pid=6308): Terminating (SIGINT) 06:39:56.302417 run patchelf(pid=6308): Terminated: ok {rc=0} 06:39:56.335221 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6305): Process ended prematurely: osmo-stp_10.42.42.5(pid=6305) [trial-2370↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6305)] [trial-2370↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 06:39:56.345087 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 06:39:56.406759 run osmo-hlr_10.42.42.2(pid=6302): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6302)] 06:39:56.457633 run osmo-hlr_10.42.42.2(pid=6302): stdout: | (launched: 2022-12-10_06:39:53.081152) 06:39:56.508937 run osmo-hlr_10.42.42.2(pid=6302): stderr: | �[0;m�[1;31m20221210063953280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210063953280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210063953280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210063953280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210063953280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210063953280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210063953293 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210063953301 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210063953302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210063953302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:39:56.552713 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6295): Terminating (SIGTERM) 06:39:56.594163 run iperf3-srv_10.42.42.10(pid=6296): Terminating (SIGTERM) 06:39:56.635521 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6297): Terminating (SIGTERM) 06:39:56.676647 run iperf3-srv_10.42.42.10(pid=6298): Terminating (SIGTERM) 06:39:56.718157 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6301): Terminating (SIGTERM) 06:39:56.759493 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6304): Terminating (SIGTERM) 06:39:56.800779 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6307): Terminating (SIGTERM) 06:39:56.810309 --- ParallelTerminationStrategy: PID 6295 died... 06:39:56.865412 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6295): Terminated: ok {rc=0} 06:39:56.875307 --- ParallelTerminationStrategy: PID 6296 died... 06:39:56.930060 run iperf3-srv_10.42.42.10(pid=6296): Terminated {rc=256} 06:39:56.939794 --- ParallelTerminationStrategy: PID 6297 died... 06:39:56.994640 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6297): Terminated: ok {rc=0} 06:39:57.004504 --- ParallelTerminationStrategy: PID 6298 died... 06:39:57.059343 run iperf3-srv_10.42.42.10(pid=6298): Terminated {rc=256} 06:39:57.069220 --- ParallelTerminationStrategy: PID 6301 died... 06:39:57.123789 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6301): Terminated: ok {rc=0} 06:39:57.133757 --- ParallelTerminationStrategy: PID 6304 died... 06:39:57.188930 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6304): Terminated: ok {rc=0} 06:39:57.198804 --- ParallelTerminationStrategy: PID 6307 died... 06:39:57.254469 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6307): Terminated: ok {rc=0} 06:39:57.341567 bus /gobi_0: Setting Powered False 06:39:58.448111 bus /gobi_0: Setting Powered False 06:39:59.557361 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6305): Process ended prematurely: osmo-stp_10.42.42.5(pid=6305) [trial-2370↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6305)]