Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=5876): Process ended prematurely: osmo-stp_10.42.42.5(pid=5876) [trial-2370↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5876)]
Standard Output
---------------------------------------------- trial-2370 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 06:37:38.984600 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:38.996077 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 06:37:39.136931 tst ping_idle_ping.py: using LAC 26537 06:37:39.258103 tst ping_idle_ping.py: using RAC 17 06:37:39.379411 tst ping_idle_ping.py: using CellId 26537 06:37:39.500801 tst ping_idle_ping.py: using BVCI 26538 06:37:39.525042 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:39.536336 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:39.547518 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:39.558792 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:39.569833 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:39.580876 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:39.592188 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 06:37:39.603379 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 06:37:39.886516 tst ping_idle_ping.py:24: start network... 06:37:40.015632 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:37:40.514263 run create_hlr_db(pid=5870): Launched 06:37:40.694553 bus /gobi_6: Setting Powered False 06:37:41.714776 run create_hlr_db(pid=5870): Terminated: ok {rc=0} 06:37:42.106819 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5872): Launched 06:37:42.398172 run osmo-hlr_10.42.42.2(pid=5873): Launched 06:37:42.504435 run osmo-stp_10.42.42.5: Starting osmo-stp 06:37:43.010248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5875): Launched 06:37:43.300649 run osmo-stp_10.42.42.5(pid=5876): Launched 06:37:43.407289 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:37:43.912430 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5878): Launched 06:37:44.015429 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:37:44.269621 run patchelf(pid=5879): Launched 06:37:44.440372 run osmo-stp_10.42.42.5(pid=5876): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5876)] 06:37:44.564879 run osmo-stp_10.42.42.5(pid=5876): stdout: | (launched: 2022-12-10_06:37:43.157168) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:37:44.690317 run osmo-stp_10.42.42.5(pid=5876): stderr: | �[0;m�[38;5;43m20221210063743327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210063743327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210063743327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210063743327 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210063743328 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210063743328 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210063743328 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:37:44.810936 run osmo-stp_10.42.42.5(pid=5876): stdout: | (launched: 2022-12-10_06:37:43.157168) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:37:44.930349 run osmo-stp_10.42.42.5(pid=5876): stderr: | �[0;m�[38;5;43m20221210063743327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210063743327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210063743327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210063743327 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210063743328 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210063743328 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210063743328 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:37:45.069242 run patchelf(pid=5879): Terminating (SIGINT) 06:37:45.233287 run patchelf(pid=5879): Terminated: ok {rc=0} 06:37:45.262926 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=5876): Process ended prematurely: osmo-stp_10.42.42.5(pid=5876) [trial-2370↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5876)] [trial-2370↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 06:37:45.271524 tst ping_idle_ping.py:27: Test FAILED (6.3 sec) 06:37:45.331149 run osmo-hlr_10.42.42.2(pid=5873): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5873)] 06:37:45.379240 run osmo-hlr_10.42.42.2(pid=5873): stdout: | (launched: 2022-12-10_06:37:42.253838) 06:37:45.428092 run osmo-hlr_10.42.42.2(pid=5873): stderr: | �[0;m�[1;31m20221210063742429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210063742429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210063742429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210063742429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210063742429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210063742429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210063742442 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210063742452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210063742452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210063742452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:37:45.469134 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5872): Terminating (SIGTERM) 06:37:45.508100 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5875): Terminating (SIGTERM) 06:37:45.547632 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5878): Terminating (SIGTERM) 06:37:45.557163 --- ParallelTerminationStrategy: PID 5872 died... 06:37:45.609583 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5872): Terminated: ok {rc=0} 06:37:45.619489 --- ParallelTerminationStrategy: PID 5875 died... 06:37:45.671758 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5875): Terminated: ok {rc=0} 06:37:45.681951 --- ParallelTerminationStrategy: PID 5878 died... 06:37:45.733820 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5878): Terminated: ok {rc=0} 06:37:45.820804 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5876): Process ended prematurely: osmo-stp_10.42.42.5(pid=5876) [trial-2370↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5876)]