Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=32088): Process ended prematurely: osmo-stp_10.42.42.5(pid=32088) [trial-2370↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32088)]
Standard Output
---------------------------------------------- trial-2370 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 05:44:31.476795 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:31.489138 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 05:44:31.671382 tst cs_paging_gprs_active.py: using LAC 26251 05:44:31.828164 tst cs_paging_gprs_active.py: using RAC 241 05:44:31.997125 tst cs_paging_gprs_active.py: using CellId 26251 05:44:32.129259 tst cs_paging_gprs_active.py: using BVCI 26252 05:44:32.154436 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:32.166593 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:32.179082 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:32.190967 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:32.204110 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:32.217100 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:32.229676 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:32.241318 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:44:32.254784 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:44:32.375832 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:44:32.657079 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:44:32.783627 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:44:33.101281 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32078): Launched 05:44:33.365437 run iperf3-srv_10.42.42.10(pid=32079): Launched 05:44:33.551377 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:44:33.678066 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:44:33.996624 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32080): Launched 05:44:34.260907 run iperf3-srv_10.42.42.10(pid=32081): Launched 05:44:34.446755 tst cs_paging_gprs_active.py:38: start network... 05:44:34.573528 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:44:35.057656 run create_hlr_db(pid=32082): Launched 05:44:35.233307 bus /gobi_6: Setting Powered False 05:44:36.253965 run create_hlr_db(pid=32082): Terminated: ok {rc=0} 05:44:36.688551 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32084): Launched 05:44:37.017877 run osmo-hlr_10.42.42.2(pid=32085): Launched 05:44:37.140419 run osmo-stp_10.42.42.5: Starting osmo-stp 05:44:37.709337 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32087): Launched 05:44:38.036343 run osmo-stp_10.42.42.5(pid=32088): Launched 05:44:38.154564 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:44:38.723512 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32090): Launched 05:44:38.839981 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:44:39.125492 run patchelf(pid=32091): Launched 05:44:39.315611 run osmo-stp_10.42.42.5(pid=32088): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32088)] 05:44:39.454979 run osmo-stp_10.42.42.5(pid=32088): stdout: | (launched: 2022-12-10_05:44:37.875060) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:44:39.594390 run osmo-stp_10.42.42.5(pid=32088): stderr: | �[0;m�[38;5;43m20221210054438071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210054438071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210054438071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210054438071 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210054438072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210054438072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210054438072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:44:39.728865 run osmo-stp_10.42.42.5(pid=32088): stdout: | (launched: 2022-12-10_05:44:37.875060) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:44:39.862713 run osmo-stp_10.42.42.5(pid=32088): stderr: | �[0;m�[38;5;43m20221210054438071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210054438071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210054438071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210054438071 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210054438072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210054438072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210054438072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:44:40.017944 run patchelf(pid=32091): Terminating (SIGINT) 05:44:40.199831 run patchelf(pid=32091): Terminated: ok {rc=0} 05:44:40.233411 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32088): Process ended prematurely: osmo-stp_10.42.42.5(pid=32088) [trial-2370↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32088)] [trial-2370↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 05:44:40.243300 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 05:44:40.306211 run osmo-hlr_10.42.42.2(pid=32085): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32085)] 05:44:40.357503 run osmo-hlr_10.42.42.2(pid=32085): stdout: | (launched: 2022-12-10_05:44:36.855090) 05:44:40.409323 run osmo-hlr_10.42.42.2(pid=32085): stderr: | �[0;m�[1;31m20221210054437055 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210054437055 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210054437055 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210054437055 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210054437055 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210054437055 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210054437068 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210054437076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210054437076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210054437076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:44:40.453451 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32078): Terminating (SIGTERM) 05:44:40.494977 run iperf3-srv_10.42.42.10(pid=32079): Terminating (SIGTERM) 05:44:40.536522 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32080): Terminating (SIGTERM) 05:44:40.578313 run iperf3-srv_10.42.42.10(pid=32081): Terminating (SIGTERM) 05:44:40.619976 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32084): Terminating (SIGTERM) 05:44:40.661545 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32087): Terminating (SIGTERM) 05:44:40.702782 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32090): Terminating (SIGTERM) 05:44:40.712184 --- ParallelTerminationStrategy: PID 32078 died... 05:44:40.767229 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32078): Terminated: ok {rc=0} 05:44:40.777110 --- ParallelTerminationStrategy: PID 32079 died... 05:44:40.832615 run iperf3-srv_10.42.42.10(pid=32079): Terminated {rc=256} 05:44:40.842398 --- ParallelTerminationStrategy: PID 32080 died... 05:44:40.897117 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32080): Terminated: ok {rc=0} 05:44:40.907081 --- ParallelTerminationStrategy: PID 32081 died... 05:44:40.962030 run iperf3-srv_10.42.42.10(pid=32081): Terminated {rc=256} 05:44:40.971815 --- ParallelTerminationStrategy: PID 32084 died... 05:44:41.026586 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32084): Terminated: ok {rc=0} 05:44:41.036387 --- ParallelTerminationStrategy: PID 32087 died... 05:44:41.091033 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32087): Terminated: ok {rc=0} 05:44:41.100912 --- ParallelTerminationStrategy: PID 32090 died... 05:44:41.155708 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32090): Terminated: ok {rc=0} 05:44:41.241775 bus /gobi_0: Setting Powered False 05:44:42.347147 bus /gobi_0: Setting Powered False 05:44:43.454400 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32088): Process ended prematurely: osmo-stp_10.42.42.5(pid=32088) [trial-2370↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32088)]