Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31263): Process ended prematurely: osmo-stp_10.42.42.5(pid=31263) [trial-2370↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31263)]
Standard Output
---------------------------------------------- trial-2370 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 05:36:33.937637 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:33.948785 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 05:36:34.100586 tst cs_paging_gprs_active.py: using LAC 26209 05:36:34.233021 tst cs_paging_gprs_active.py: using RAC 199 05:36:34.359167 tst cs_paging_gprs_active.py: using CellId 26209 05:36:34.486759 tst cs_paging_gprs_active.py: using BVCI 26210 05:36:34.511959 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:34.523279 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:34.534416 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:34.545944 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:34.557115 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:34.568181 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:34.579855 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:34.590999 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:36:34.602835 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:36:34.720548 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:36:35.017386 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:36:35.154515 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:36:35.495056 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31253): Launched 05:36:35.777715 run iperf3-srv_10.42.42.10(pid=31254): Launched 05:36:35.978022 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:36:36.114143 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:36:36.454176 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31255): Launched 05:36:36.737209 run iperf3-srv_10.42.42.10(pid=31256): Launched 05:36:36.936650 tst cs_paging_gprs_active.py:38: start network... 05:36:37.073173 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:36:37.597479 run create_hlr_db(pid=31257): Launched 05:36:37.785989 bus /gobi_6: Setting Powered False 05:36:38.807096 run create_hlr_db(pid=31257): Terminated: ok {rc=0} 05:36:39.243933 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31259): Launched 05:36:39.573583 run osmo-hlr_10.42.42.2(pid=31260): Launched 05:36:39.692656 run osmo-stp_10.42.42.5: Starting osmo-stp 05:36:40.261719 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31262): Launched 05:36:40.589579 run osmo-stp_10.42.42.5(pid=31263): Launched 05:36:40.707551 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:36:41.279760 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31265): Launched 05:36:41.396062 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:36:41.683366 run patchelf(pid=31266): Launched 05:36:41.874951 run osmo-stp_10.42.42.5(pid=31263): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31263)] 05:36:42.015069 run osmo-stp_10.42.42.5(pid=31263): stdout: | (launched: 2022-12-10_05:36:40.427536) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:36:42.155495 run osmo-stp_10.42.42.5(pid=31263): stderr: | �[0;m�[38;5;43m20221210053640623 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210053640623 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210053640623 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210053640624 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210053640624 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210053640624 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210053640624 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:36:42.290997 run osmo-stp_10.42.42.5(pid=31263): stdout: | (launched: 2022-12-10_05:36:40.427536) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:36:42.425370 run osmo-stp_10.42.42.5(pid=31263): stderr: | �[0;m�[38;5;43m20221210053640623 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210053640623 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210053640623 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210053640624 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210053640624 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210053640624 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210053640624 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:36:42.581575 run patchelf(pid=31266): Terminating (SIGINT) 05:36:42.764666 run patchelf(pid=31266): Terminated: ok {rc=0} 05:36:42.798422 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31263): Process ended prematurely: osmo-stp_10.42.42.5(pid=31263) [trial-2370↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31263)] [trial-2370↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 05:36:42.808338 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 05:36:42.870654 run osmo-hlr_10.42.42.2(pid=31260): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31260)] 05:36:42.921548 run osmo-hlr_10.42.42.2(pid=31260): stdout: | (launched: 2022-12-10_05:36:39.410600) 05:36:42.972898 run osmo-hlr_10.42.42.2(pid=31260): stderr: | �[0;m�[1;31m20221210053639610 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210053639610 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210053639610 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210053639610 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210053639610 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210053639610 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210053639623 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210053639631 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210053639631 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210053639631 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:36:43.017023 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31253): Terminating (SIGTERM) 05:36:43.058498 run iperf3-srv_10.42.42.10(pid=31254): Terminating (SIGTERM) 05:36:43.100117 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31255): Terminating (SIGTERM) 05:36:43.141975 run iperf3-srv_10.42.42.10(pid=31256): Terminating (SIGTERM) 05:36:43.183428 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31259): Terminating (SIGTERM) 05:36:43.224733 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31262): Terminating (SIGTERM) 05:36:43.265975 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31265): Terminating (SIGTERM) 05:36:43.275591 --- ParallelTerminationStrategy: PID 31253 died... 05:36:43.331309 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31253): Terminated: ok {rc=0} 05:36:43.341398 --- ParallelTerminationStrategy: PID 31254 died... 05:36:43.396284 run iperf3-srv_10.42.42.10(pid=31254): Terminated {rc=256} 05:36:43.406197 --- ParallelTerminationStrategy: PID 31255 died... 05:36:43.461415 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31255): Terminated: ok {rc=0} 05:36:43.471309 --- ParallelTerminationStrategy: PID 31256 died... 05:36:43.526662 run iperf3-srv_10.42.42.10(pid=31256): Terminated {rc=256} 05:36:43.536723 --- ParallelTerminationStrategy: PID 31259 died... 05:36:43.592297 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31259): Terminated: ok {rc=0} 05:36:43.602509 --- ParallelTerminationStrategy: PID 31262 died... 05:36:43.657695 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31262): Terminated: ok {rc=0} 05:36:43.667780 --- ParallelTerminationStrategy: PID 31265 died... 05:36:43.722980 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31265): Terminated: ok {rc=0} 05:36:43.810656 bus /gobi_0: Setting Powered False 05:36:44.911813 bus /gobi_0: Setting Powered False 05:36:46.021858 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31263): Process ended prematurely: osmo-stp_10.42.42.5(pid=31263) [trial-2370↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31263)]