Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=573): Process ended prematurely: osmo-stp_10.42.42.5(pid=573) [trial-2370↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=573)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 05:54:07.220863 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:07.232757 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 05:54:07.377548 tst cs_paging_gprs_active.py: using LAC 26302 05:54:07.496410 tst cs_paging_gprs_active.py: using RAC 37 05:54:07.613697 tst cs_paging_gprs_active.py: using CellId 26302 05:54:07.729931 tst cs_paging_gprs_active.py: using BVCI 26303 05:54:07.753106 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:07.764183 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:07.775332 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:07.786697 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:07.798018 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:07.809241 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:07.820581 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:07.831700 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:07.843116 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 05:54:07.958182 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 05:54:08.239452 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:54:08.364935 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:54:08.679052 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=563): Launched 05:54:08.938675 run iperf3-srv_10.42.42.10(pid=564): Launched 05:54:09.121886 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:54:09.246563 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:54:09.560841 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=565): Launched 05:54:09.820584 run iperf3-srv_10.42.42.10(pid=566): Launched 05:54:10.003665 tst cs_paging_gprs_active.py:38: start network... 05:54:10.128813 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:54:10.613390 run create_hlr_db(pid=567): Launched 05:54:10.786304 bus /gobi_6: Setting Powered False 05:54:11.808703 run create_hlr_db(pid=567): Terminated: ok {rc=0} 05:54:12.239689 run pcap-recorder_any(filters='host 10.42.42.2')(pid=569): Launched 05:54:12.563805 run osmo-hlr_10.42.42.2(pid=570): Launched 05:54:12.685570 run osmo-stp_10.42.42.5: Starting osmo-stp 05:54:13.247205 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=572): Launched 05:54:13.572495 run osmo-stp_10.42.42.5(pid=573): Launched 05:54:13.689815 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:54:14.254932 run pcap-recorder_any(filters='host 10.42.42.6')(pid=575): Launched 05:54:14.370465 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:54:14.651951 run patchelf(pid=576): Launched 05:54:14.840827 run osmo-stp_10.42.42.5(pid=573): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=573)] 05:54:14.978984 run osmo-stp_10.42.42.5(pid=573): stdout: | (launched: 2022-12-10_05:54:13.411170) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:54:15.118220 run osmo-stp_10.42.42.5(pid=573): stderr: | �[0;m�[38;5;43m20221210055413603 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055413603 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055413603 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055413603 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055413606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055413606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055413606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:54:15.251559 run osmo-stp_10.42.42.5(pid=573): stdout: | (launched: 2022-12-10_05:54:13.411170) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:54:15.383849 run osmo-stp_10.42.42.5(pid=573): stderr: | �[0;m�[38;5;43m20221210055413603 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055413603 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055413603 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055413603 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055413606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055413606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055413606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:54:15.538045 run patchelf(pid=576): Terminating (SIGINT) 05:54:15.718614 run patchelf(pid=576): Terminated: ok {rc=0} 05:54:15.751919 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=573): Process ended prematurely: osmo-stp_10.42.42.5(pid=573) [trial-2370↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=573)] [trial-2370↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 05:54:15.762066 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 05:54:15.825095 run osmo-hlr_10.42.42.2(pid=570): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=570)] 05:54:15.878301 run osmo-hlr_10.42.42.2(pid=570): stdout: | (launched: 2022-12-10_05:54:12.403980) 05:54:15.945484 run osmo-hlr_10.42.42.2(pid=570): stderr: | �[0;m�[1;31m20221210055412603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210055412603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210055412603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210055412603 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210055412604 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210055412604 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210055412616 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210055412625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210055412626 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210055412626 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:54:15.990689 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=563): Terminating (SIGTERM) 05:54:16.035299 run iperf3-srv_10.42.42.10(pid=564): Terminating (SIGTERM) 05:54:16.080696 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=565): Terminating (SIGTERM) 05:54:16.126561 run iperf3-srv_10.42.42.10(pid=566): Terminating (SIGTERM) 05:54:16.169968 run pcap-recorder_any(filters='host 10.42.42.2')(pid=569): Terminating (SIGTERM) 05:54:16.215642 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=572): Terminating (SIGTERM) 05:54:16.259781 run pcap-recorder_any(filters='host 10.42.42.6')(pid=575): Terminating (SIGTERM) 05:54:16.271733 --- ParallelTerminationStrategy: PID 563 died... 05:54:16.332096 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=563): Terminated: ok {rc=0} 05:54:16.342791 --- ParallelTerminationStrategy: PID 564 died... 05:54:16.400866 run iperf3-srv_10.42.42.10(pid=564): Terminated {rc=256} 05:54:16.411521 --- ParallelTerminationStrategy: PID 565 died... 05:54:16.468817 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=565): Terminated: ok {rc=0} 05:54:16.479451 --- ParallelTerminationStrategy: PID 566 died... 05:54:16.537684 run iperf3-srv_10.42.42.10(pid=566): Terminated {rc=256} 05:54:16.548246 --- ParallelTerminationStrategy: PID 569 died... 05:54:16.606028 run pcap-recorder_any(filters='host 10.42.42.2')(pid=569): Terminated: ok {rc=0} 05:54:16.616740 --- ParallelTerminationStrategy: PID 572 died... 05:54:16.674929 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=572): Terminated: ok {rc=0} 05:54:16.685607 --- ParallelTerminationStrategy: PID 575 died... 05:54:16.742561 run pcap-recorder_any(filters='host 10.42.42.6')(pid=575): Terminated: ok {rc=0} 05:54:16.833306 bus /gobi_0: Setting Powered False 05:54:17.936661 bus /gobi_0: Setting Powered False 05:54:19.048636 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=573): Process ended prematurely: osmo-stp_10.42.42.5(pid=573) [trial-2370↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=573)]