Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=1671): Process ended prematurely: osmo-stp_10.42.42.5(pid=1671) [trial-2370↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1671)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 06:00:58.338098 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:00:58.349053 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 06:00:58.505828 tst cs_paging_gprs_active.py: using LAC 26339 06:00:58.623453 tst cs_paging_gprs_active.py: using RAC 74 06:00:58.743524 tst cs_paging_gprs_active.py: using CellId 26339 06:00:58.861313 tst cs_paging_gprs_active.py: using BVCI 26340 06:00:58.884141 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:00:58.895147 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:00:58.906019 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:00:58.917151 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:00:58.928996 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:00:58.939904 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:00:58.950752 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:00:58.961844 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:00:58.972922 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:00:59.092472 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:00:59.386416 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:00:59.519205 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:00:59.851922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1661): Launched 06:01:00.128891 run iperf3-srv_10.42.42.10(pid=1662): Launched 06:01:00.324848 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:01:00.458227 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:01:00.790515 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1663): Launched 06:01:01.094290 run iperf3-srv_10.42.42.10(pid=1664): Launched 06:01:01.292604 tst cs_paging_gprs_active.py:38: start network... 06:01:01.427460 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:01:01.965891 run create_hlr_db(pid=1665): Launched 06:01:02.177925 bus /gobi_6: Setting Powered False 06:01:03.179125 run create_hlr_db(pid=1665): Terminated: ok {rc=0} 06:01:03.599251 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1667): Launched 06:01:03.899991 run osmo-hlr_10.42.42.2(pid=1668): Launched 06:01:04.009455 run osmo-stp_10.42.42.5: Starting osmo-stp 06:01:04.530589 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1670): Launched 06:01:04.831548 run osmo-stp_10.42.42.5(pid=1671): Launched 06:01:04.945263 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:01:05.471345 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1673): Launched 06:01:05.578515 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:01:05.841982 run patchelf(pid=1674): Launched 06:01:06.018421 run osmo-stp_10.42.42.5(pid=1671): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1671)] 06:01:06.147429 run osmo-stp_10.42.42.5(pid=1671): stdout: | (launched: 2022-12-10_06:01:04.682957) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:01:06.276724 run osmo-stp_10.42.42.5(pid=1671): stderr: | �[0;m�[38;5;43m20221210060104852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210060104852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210060104852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210060104853 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210060104855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210060104855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210060104855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:01:06.401246 run osmo-stp_10.42.42.5(pid=1671): stdout: | (launched: 2022-12-10_06:01:04.682957) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:01:06.524797 run osmo-stp_10.42.42.5(pid=1671): stderr: | �[0;m�[38;5;43m20221210060104852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210060104852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210060104852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210060104853 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210060104855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210060104855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210060104855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:01:06.668246 run patchelf(pid=1674): Terminating (SIGINT) 06:01:06.836894 run patchelf(pid=1674): Terminated: ok {rc=0} 06:01:06.868522 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1671): Process ended prematurely: osmo-stp_10.42.42.5(pid=1671) [trial-2370↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1671)] [trial-2370↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 06:01:06.878030 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 06:01:06.938010 run osmo-hlr_10.42.42.2(pid=1668): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1668)] 06:01:06.986680 run osmo-hlr_10.42.42.2(pid=1668): stdout: | (launched: 2022-12-10_06:01:03.751606) 06:01:07.036035 run osmo-hlr_10.42.42.2(pid=1668): stderr: | �[0;m�[1;31m20221210060103927 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210060103927 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210060103927 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210060103927 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210060103927 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210060103927 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210060103939 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210060103949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210060103949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210060103949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:01:07.077696 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1661): Terminating (SIGTERM) 06:01:07.117162 run iperf3-srv_10.42.42.10(pid=1662): Terminating (SIGTERM) 06:01:07.157078 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1663): Terminating (SIGTERM) 06:01:07.196245 run iperf3-srv_10.42.42.10(pid=1664): Terminating (SIGTERM) 06:01:07.235861 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1667): Terminating (SIGTERM) 06:01:07.275057 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1670): Terminating (SIGTERM) 06:01:07.314117 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1673): Terminating (SIGTERM) 06:01:07.323386 --- ParallelTerminationStrategy: PID 1661 died... 06:01:07.376679 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1661): Terminated: ok {rc=0} 06:01:07.386078 --- ParallelTerminationStrategy: PID 1662 died... 06:01:07.438267 run iperf3-srv_10.42.42.10(pid=1662): Terminated {rc=256} 06:01:07.447824 --- ParallelTerminationStrategy: PID 1663 died... 06:01:07.499832 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1663): Terminated: ok {rc=0} 06:01:07.509390 --- ParallelTerminationStrategy: PID 1664 died... 06:01:07.561374 run iperf3-srv_10.42.42.10(pid=1664): Terminated {rc=256} 06:01:07.570876 --- ParallelTerminationStrategy: PID 1667 died... 06:01:07.622982 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1667): Terminated: ok {rc=0} 06:01:07.632541 --- ParallelTerminationStrategy: PID 1670 died... 06:01:07.684758 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1670): Terminated: ok {rc=0} 06:01:07.694358 --- ParallelTerminationStrategy: PID 1673 died... 06:01:07.746496 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1673): Terminated: ok {rc=0} 06:01:07.832299 bus /gobi_0: Setting Powered False 06:01:08.934770 bus /gobi_0: Setting Powered False 06:01:10.044072 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1671): Process ended prematurely: osmo-stp_10.42.42.5(pid=1671) [trial-2370↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1671)]