Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=31951): Process ended prematurely: osmo-stp_10.42.42.5(pid=31951) [trial-2370↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31951)]
Standard Output
---------------------------------------------- trial-2370 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 05:42:31.315119 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:31.327047 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 05:42:31.491472 tst cs_paging_gprs_active.py: using LAC 26241 05:42:31.619768 tst cs_paging_gprs_active.py: using RAC 231 05:42:31.769386 tst cs_paging_gprs_active.py: using CellId 26241 05:42:31.894089 tst cs_paging_gprs_active.py: using BVCI 26242 05:42:31.919536 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:31.931512 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:31.943275 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:31.955905 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:31.969550 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:31.982299 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:31.994118 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:32.006917 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 05:42:32.021030 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 05:42:32.159087 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 05:42:32.455139 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:42:32.589029 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:42:32.923844 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31941): Launched 05:42:33.203642 run iperf3-srv_10.42.42.10(pid=31942): Launched 05:42:33.400328 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:42:33.534484 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:42:33.871884 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31943): Launched 05:42:34.149701 run iperf3-srv_10.42.42.10(pid=31944): Launched 05:42:34.345490 tst cs_paging_gprs_active.py:38: start network... 05:42:34.478572 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:42:34.999967 run create_hlr_db(pid=31945): Launched 05:42:35.185354 bus /gobi_6: Setting Powered False 05:42:36.205771 run create_hlr_db(pid=31945): Terminated: ok {rc=0} 05:42:36.614402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31947): Launched 05:42:36.919756 run osmo-hlr_10.42.42.2(pid=31948): Launched 05:42:37.038228 run osmo-stp_10.42.42.5: Starting osmo-stp 05:42:37.573891 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31950): Launched 05:42:37.878896 run osmo-stp_10.42.42.5(pid=31951): Launched 05:42:37.990161 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:42:38.521083 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31953): Launched 05:42:38.628857 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:42:38.894747 run patchelf(pid=31954): Launched 05:42:39.071677 run osmo-stp_10.42.42.5(pid=31951): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31951)] 05:42:39.201582 run osmo-stp_10.42.42.5(pid=31951): stdout: | (launched: 2022-12-10_05:42:37.727312) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:42:39.331782 run osmo-stp_10.42.42.5(pid=31951): stderr: | �[0;m�[38;5;43m20221210054237901 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210054237901 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210054237901 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210054237901 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210054237902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210054237902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210054237902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:42:39.457218 run osmo-stp_10.42.42.5(pid=31951): stdout: | (launched: 2022-12-10_05:42:37.727312) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:42:39.581329 run osmo-stp_10.42.42.5(pid=31951): stderr: | �[0;m�[38;5;43m20221210054237901 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210054237901 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210054237901 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210054237901 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210054237902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210054237902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210054237902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:42:39.725682 run patchelf(pid=31954): Terminating (SIGINT) 05:42:39.895133 run patchelf(pid=31954): Terminated: ok {rc=0} 05:42:39.926417 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31951): Process ended prematurely: osmo-stp_10.42.42.5(pid=31951) [trial-2370↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31951)] [trial-2370↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 05:42:39.935670 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 05:42:40.001521 run osmo-hlr_10.42.42.2(pid=31948): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31948)] 05:42:40.052471 run osmo-hlr_10.42.42.2(pid=31948): stdout: | (launched: 2022-12-10_05:42:36.768334) 05:42:40.104406 run osmo-hlr_10.42.42.2(pid=31948): stderr: | �[0;m�[1;31m20221210054236946 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210054236946 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210054236946 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210054236946 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210054236946 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210054236946 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210054236959 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210054236969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210054236970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210054236970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:42:40.148337 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31941): Terminating (SIGTERM) 05:42:40.189755 run iperf3-srv_10.42.42.10(pid=31942): Terminating (SIGTERM) 05:42:40.231971 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31943): Terminating (SIGTERM) 05:42:40.273406 run iperf3-srv_10.42.42.10(pid=31944): Terminating (SIGTERM) 05:42:40.315129 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31947): Terminating (SIGTERM) 05:42:40.356803 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31950): Terminating (SIGTERM) 05:42:40.398451 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31953): Terminating (SIGTERM) 05:42:40.407924 --- ParallelTerminationStrategy: PID 31941 died... 05:42:40.463510 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31941): Terminated: ok {rc=0} 05:42:40.473791 --- ParallelTerminationStrategy: PID 31942 died... 05:42:40.528741 run iperf3-srv_10.42.42.10(pid=31942): Terminated {rc=256} 05:42:40.538568 --- ParallelTerminationStrategy: PID 31943 died... 05:42:40.593851 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31943): Terminated: ok {rc=0} 05:42:40.603719 --- ParallelTerminationStrategy: PID 31944 died... 05:42:40.658791 run iperf3-srv_10.42.42.10(pid=31944): Terminated {rc=256} 05:42:40.668574 --- ParallelTerminationStrategy: PID 31947 died... 05:42:40.724375 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31947): Terminated: ok {rc=0} 05:42:40.734290 --- ParallelTerminationStrategy: PID 31950 died... 05:42:40.789463 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31950): Terminated: ok {rc=0} 05:42:40.799682 --- ParallelTerminationStrategy: PID 31953 died... 05:42:40.855375 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31953): Terminated: ok {rc=0} 05:42:40.942137 bus /gobi_0: Setting Powered False 05:42:42.048540 bus /gobi_0: Setting Powered False 05:42:43.160777 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31951): Process ended prematurely: osmo-stp_10.42.42.5(pid=31951) [trial-2370↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31951)]