Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=2523): Process ended prematurely: osmo-stp_10.42.42.5(pid=2523) [trial-2370↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2523)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 06:09:12.490495 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:12.501630 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 06:09:12.662229 tst cs_paging_gprs_active.py: using LAC 26383 06:09:12.788197 tst cs_paging_gprs_active.py: using RAC 118 06:09:12.912184 tst cs_paging_gprs_active.py: using CellId 26383 06:09:13.038796 tst cs_paging_gprs_active.py: using BVCI 26384 06:09:13.062973 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:13.074257 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:13.085346 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:13.096412 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:13.107521 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:13.118713 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:13.129924 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:13.140912 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:09:13.152131 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:09:13.266082 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:09:13.554723 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:09:13.686601 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:09:14.013412 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2513): Launched 06:09:14.284598 run iperf3-srv_10.42.42.10(pid=2514): Launched 06:09:14.477100 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:09:14.608999 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:09:14.935606 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2515): Launched 06:09:15.206884 run iperf3-srv_10.42.42.10(pid=2516): Launched 06:09:15.399713 tst cs_paging_gprs_active.py:38: start network... 06:09:15.531319 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:09:16.097624 run create_hlr_db(pid=2517): Launched 06:09:16.282696 bus /gobi_6: Setting Powered False 06:09:17.301953 run create_hlr_db(pid=2517): Terminated: ok {rc=0} 06:09:17.699324 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2519): Launched 06:09:17.993789 run osmo-hlr_10.42.42.2(pid=2520): Launched 06:09:18.108744 run osmo-stp_10.42.42.5: Starting osmo-stp 06:09:18.628023 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2522): Launched 06:09:18.922145 run osmo-stp_10.42.42.5(pid=2523): Launched 06:09:19.028776 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:09:19.543053 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2525): Launched 06:09:19.647966 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:09:19.911987 run patchelf(pid=2526): Launched 06:09:20.085281 run osmo-stp_10.42.42.5(pid=2523): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2523)] 06:09:20.211896 run osmo-stp_10.42.42.5(pid=2523): stdout: | (launched: 2022-12-10_06:09:18.777315) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:09:20.338796 run osmo-stp_10.42.42.5(pid=2523): stderr: | �[0;m�[38;5;43m20221210060918944 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210060918944 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210060918944 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210060918945 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210060918947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210060918947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210060918947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:09:20.461455 run osmo-stp_10.42.42.5(pid=2523): stdout: | (launched: 2022-12-10_06:09:18.777315) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:09:20.583319 run osmo-stp_10.42.42.5(pid=2523): stderr: | �[0;m�[38;5;43m20221210060918944 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210060918944 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210060918944 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210060918945 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210060918947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210060918947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210060918947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:09:20.724907 run patchelf(pid=2526): Terminating (SIGINT) 06:09:20.890878 run patchelf(pid=2526): Terminated: ok {rc=0} 06:09:20.921637 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2523): Process ended prematurely: osmo-stp_10.42.42.5(pid=2523) [trial-2370↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2523)] [trial-2370↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 06:09:20.930952 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 06:09:20.990540 run osmo-hlr_10.42.42.2(pid=2520): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2520)] 06:09:21.038468 run osmo-hlr_10.42.42.2(pid=2520): stdout: | (launched: 2022-12-10_06:09:17.848484) 06:09:21.087262 run osmo-hlr_10.42.42.2(pid=2520): stderr: | �[0;m�[1;31m20221210060918022 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210060918022 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210060918022 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210060918022 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210060918022 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210060918023 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210060918035 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210060918044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210060918044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210060918044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:09:21.128699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2513): Terminating (SIGTERM) 06:09:21.167713 run iperf3-srv_10.42.42.10(pid=2514): Terminating (SIGTERM) 06:09:21.207270 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2515): Terminating (SIGTERM) 06:09:21.246210 run iperf3-srv_10.42.42.10(pid=2516): Terminating (SIGTERM) 06:09:21.285246 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2519): Terminating (SIGTERM) 06:09:21.324208 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2522): Terminating (SIGTERM) 06:09:21.363139 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2525): Terminating (SIGTERM) 06:09:21.372411 --- ParallelTerminationStrategy: PID 2513 died... 06:09:21.425215 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2513): Terminated: ok {rc=0} 06:09:21.434746 --- ParallelTerminationStrategy: PID 2514 died... 06:09:21.486575 run iperf3-srv_10.42.42.10(pid=2514): Terminated {rc=256} 06:09:21.496214 --- ParallelTerminationStrategy: PID 2515 died... 06:09:21.548246 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2515): Terminated: ok {rc=0} 06:09:21.558012 --- ParallelTerminationStrategy: PID 2516 died... 06:09:21.610088 run iperf3-srv_10.42.42.10(pid=2516): Terminated {rc=256} 06:09:21.619534 --- ParallelTerminationStrategy: PID 2519 died... 06:09:21.671588 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2519): Terminated: ok {rc=0} 06:09:21.681348 --- ParallelTerminationStrategy: PID 2522 died... 06:09:21.733397 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2522): Terminated: ok {rc=0} 06:09:21.743126 --- ParallelTerminationStrategy: PID 2525 died... 06:09:21.794986 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2525): Terminated: ok {rc=0} 06:09:21.876638 bus /gobi_0: Setting Powered False 06:09:22.983300 bus /gobi_0: Setting Powered False 06:09:24.089644 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2523): Process ended prematurely: osmo-stp_10.42.42.5(pid=2523) [trial-2370↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2523)]