Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=2230): Process ended prematurely: osmo-stp_10.42.42.5(pid=2230) [trial-2370↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2230)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 06:08:10.572362 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:08:10.583579 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 06:08:10.721624 tst cs_paging_gprs_active.py: using LAC 26378 06:08:10.845075 tst cs_paging_gprs_active.py: using RAC 113 06:08:10.969143 tst cs_paging_gprs_active.py: using CellId 26378 06:08:11.093285 tst cs_paging_gprs_active.py: using BVCI 26379 06:08:11.117956 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:08:11.129335 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:08:11.140415 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:08:11.151717 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:08:11.162938 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:08:11.174110 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:08:11.185291 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:08:11.196226 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:08:11.207449 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:08:11.322832 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:08:11.613415 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:08:11.746123 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:08:12.076476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2171): Launched 06:08:12.349229 run iperf3-srv_10.42.42.10(pid=2172): Launched 06:08:12.543769 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:08:12.675999 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:08:13.004178 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2173): Launched 06:08:13.276099 run iperf3-srv_10.42.42.10(pid=2174): Launched 06:08:13.469578 tst cs_paging_gprs_active.py:38: start network... 06:08:13.601910 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:08:14.106867 run create_hlr_db(pid=2175): Launched 06:08:14.289536 bus /gobi_6: Setting Powered False 06:08:15.310743 run create_hlr_db(pid=2175): Terminated: ok {rc=0} 06:08:15.732627 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2177): Launched 06:08:16.184167 run osmo-hlr_10.42.42.2(pid=2178): Launched 06:08:16.459181 run osmo-stp_10.42.42.5: Starting osmo-stp 06:08:17.074798 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2216): Launched 06:08:17.589575 run osmo-stp_10.42.42.5(pid=2230): Launched 06:08:17.796883 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:08:18.525546 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2288): Launched 06:08:18.684831 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:08:19.026488 run patchelf(pid=2325): Launched 06:08:19.250195 run osmo-stp_10.42.42.5(pid=2230): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2230)] 06:08:19.411455 run osmo-stp_10.42.42.5(pid=2230): stdout: | (launched: 2022-12-10_06:08:17.263926) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:08:19.575485 run osmo-stp_10.42.42.5(pid=2230): stderr: | �[0;m�[38;5;43m20221210060817542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210060817542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210060817543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210060817543 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210060817543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210060817544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210060817544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:08:19.729663 run osmo-stp_10.42.42.5(pid=2230): stdout: | (launched: 2022-12-10_06:08:17.263926) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:08:19.881572 run osmo-stp_10.42.42.5(pid=2230): stderr: | �[0;m�[38;5;43m20221210060817542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210060817542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210060817543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210060817543 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210060817543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210060817544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210060817544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:08:20.039717 run patchelf(pid=2325): Terminating (SIGINT) 06:08:20.227049 run patchelf(pid=2325): Terminated: ok {rc=0} 06:08:20.259269 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2230): Process ended prematurely: osmo-stp_10.42.42.5(pid=2230) [trial-2370↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2230)] [trial-2370↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 06:08:20.269638 tst cs_paging_gprs_active.py:38: Test FAILED (9.7 sec) 06:08:20.334180 run osmo-hlr_10.42.42.2(pid=2178): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2178)] 06:08:20.386500 run osmo-hlr_10.42.42.2(pid=2178): stdout: | (launched: 2022-12-10_06:08:15.897097) 06:08:20.439136 run osmo-hlr_10.42.42.2(pid=2178): stderr: | �[0;m�[1;31m20221210060816140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210060816140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210060816140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210060816140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210060816140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210060816140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210060816155 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210060816184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210060816184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210060816184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:08:20.484471 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2171): Terminating (SIGTERM) 06:08:20.528812 run iperf3-srv_10.42.42.10(pid=2172): Terminating (SIGTERM) 06:08:20.575045 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2173): Terminating (SIGTERM) 06:08:20.617786 run iperf3-srv_10.42.42.10(pid=2174): Terminating (SIGTERM) 06:08:20.660620 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2177): Terminating (SIGTERM) 06:08:20.703313 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2216): Terminating (SIGTERM) 06:08:20.748144 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2288): Terminating (SIGTERM) 06:08:20.758622 --- ParallelTerminationStrategy: PID 2171 died... 06:08:20.815870 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2171): Terminated: ok {rc=0} 06:08:20.826584 --- ParallelTerminationStrategy: PID 2172 died... 06:08:20.883290 run iperf3-srv_10.42.42.10(pid=2172): Terminated {rc=256} 06:08:20.893951 --- ParallelTerminationStrategy: PID 2173 died... 06:08:20.950766 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2173): Terminated: ok {rc=0} 06:08:20.961470 --- ParallelTerminationStrategy: PID 2174 died... 06:08:21.018362 run iperf3-srv_10.42.42.10(pid=2174): Terminated {rc=256} 06:08:21.028797 --- ParallelTerminationStrategy: PID 2177 died... 06:08:21.085230 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2177): Terminated: ok {rc=0} 06:08:21.095660 --- ParallelTerminationStrategy: PID 2216 died... 06:08:21.151513 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2216): Terminated: ok {rc=0} 06:08:21.162630 --- ParallelTerminationStrategy: PID 2288 died... 06:08:21.218396 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2288): Terminated: ok {rc=0} 06:08:21.306993 bus /gobi_0: Setting Powered False 06:08:22.410415 bus /gobi_0: Setting Powered False 06:08:23.519140 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2230): Process ended prematurely: osmo-stp_10.42.42.5(pid=2230) [trial-2370↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2230)]