Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=9246): Process ended prematurely: osmo-stp_10.42.42.5(pid=9246) [trial-2371↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9246)]
Standard Output
---------------------------------------------- trial-2371 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 07:09:09.146713 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:09:09.157831 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:09:09.288418 tst cs_paging_gprs_active.py: using LAC 26702 07:09:09.411433 tst cs_paging_gprs_active.py: using RAC 182 07:09:09.535910 tst cs_paging_gprs_active.py: using CellId 26702 07:09:09.653968 tst cs_paging_gprs_active.py: using BVCI 26703 07:09:09.676141 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:09:09.686753 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:09:09.697140 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:09:09.707907 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:09:09.718626 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:09:09.729247 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:09:09.739889 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:09:09.750310 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:09:09.761115 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:09:09.880020 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:09:10.164742 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:09:10.295893 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:09:10.619757 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9236): Launched 07:09:10.887495 run iperf3-srv_10.42.42.10(pid=9237): Launched 07:09:11.079159 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:09:11.209885 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:09:11.533697 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9238): Launched 07:09:11.801512 run iperf3-srv_10.42.42.10(pid=9239): Launched 07:09:11.993205 tst cs_paging_gprs_active.py:38: start network... 07:09:12.123084 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:09:12.624887 run create_hlr_db(pid=9240): Launched 07:09:12.806251 bus /gobi_6: Setting Powered False 07:09:13.827895 run create_hlr_db(pid=9240): Terminated: ok {rc=0} 07:09:14.244344 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9242): Launched 07:09:14.558571 run osmo-hlr_10.42.42.2(pid=9243): Launched 07:09:14.676672 run osmo-stp_10.42.42.5: Starting osmo-stp 07:09:15.224640 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9245): Launched 07:09:15.537849 run osmo-stp_10.42.42.5(pid=9246): Launched 07:09:15.651444 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:09:16.209358 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9248): Launched 07:09:16.319102 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:09:16.601389 run patchelf(pid=9249): Launched 07:09:16.786961 run osmo-stp_10.42.42.5(pid=9246): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9246)] 07:09:16.923143 run osmo-stp_10.42.42.5(pid=9246): stdout: | (launched: 2022-12-10_07:09:15.384327) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:09:17.059357 run osmo-stp_10.42.42.5(pid=9246): stderr: | �[0;m�[38;5;43m20221210070915573 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210070915573 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210070915574 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210070915574 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210070915574 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210070915575 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210070915575 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:09:17.190660 run osmo-stp_10.42.42.5(pid=9246): stdout: | (launched: 2022-12-10_07:09:15.384327) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:09:17.319984 run osmo-stp_10.42.42.5(pid=9246): stderr: | �[0;m�[38;5;43m20221210070915573 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210070915573 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210070915574 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210070915574 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210070915574 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210070915575 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210070915575 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:09:17.469993 run patchelf(pid=9249): Terminating (SIGINT) 07:09:17.646390 run patchelf(pid=9249): Terminated: ok {rc=0} 07:09:17.678903 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9246): Process ended prematurely: osmo-stp_10.42.42.5(pid=9246) [trial-2371↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9246)] [trial-2371↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 07:09:17.688559 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 07:09:17.750773 run osmo-hlr_10.42.42.2(pid=9243): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9243)] 07:09:17.801595 run osmo-hlr_10.42.42.2(pid=9243): stdout: | (launched: 2022-12-10_07:09:14.404231) 07:09:17.853088 run osmo-hlr_10.42.42.2(pid=9243): stderr: | �[0;m�[1;31m20221210070914601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210070914601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210070914601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210070914601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210070914602 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210070914602 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210070914614 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210070914622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210070914622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210070914622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:09:17.896858 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9236): Terminating (SIGTERM) 07:09:17.938216 run iperf3-srv_10.42.42.10(pid=9237): Terminating (SIGTERM) 07:09:17.979524 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9238): Terminating (SIGTERM) 07:09:18.020633 run iperf3-srv_10.42.42.10(pid=9239): Terminating (SIGTERM) 07:09:18.061938 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9242): Terminating (SIGTERM) 07:09:18.103694 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9245): Terminating (SIGTERM) 07:09:18.145119 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9248): Terminating (SIGTERM) 07:09:18.154573 --- ParallelTerminationStrategy: PID 9236 died... 07:09:18.209762 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9236): Terminated: ok {rc=0} 07:09:18.219601 --- ParallelTerminationStrategy: PID 9237 died... 07:09:18.274201 run iperf3-srv_10.42.42.10(pid=9237): Terminated {rc=256} 07:09:18.283933 --- ParallelTerminationStrategy: PID 9238 died... 07:09:18.339176 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9238): Terminated: ok {rc=0} 07:09:18.349137 --- ParallelTerminationStrategy: PID 9239 died... 07:09:18.403720 run iperf3-srv_10.42.42.10(pid=9239): Terminated {rc=256} 07:09:18.413879 --- ParallelTerminationStrategy: PID 9242 died... 07:09:18.468484 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9242): Terminated: ok {rc=0} 07:09:18.478296 --- ParallelTerminationStrategy: PID 9245 died... 07:09:18.532848 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9245): Terminated: ok {rc=0} 07:09:18.542670 --- ParallelTerminationStrategy: PID 9248 died... 07:09:18.597734 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9248): Terminated: ok {rc=0} 07:09:18.685228 bus /gobi_0: Setting Powered False 07:09:19.792371 bus /gobi_0: Setting Powered False 07:09:20.904360 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9246): Process ended prematurely: osmo-stp_10.42.42.5(pid=9246) [trial-2371↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9246)]