Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping.py (from gprs_sysmo)

Failing for the past 41 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=8398): Process ended prematurely: osmo-stp_10.42.42.5(pid=8398) [trial-2371↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8398)]

Standard Output

----------------------------------------------
trial-2371 gprs:sysmo ping.py
----------------------------------------------
07:00:55.007379 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:00:55.019135 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
07:00:55.156847 tst                          ping.py: using LAC 26658
07:00:55.286090 tst                          ping.py: using RAC 138
07:00:55.416510 tst                          ping.py: using CellId 26658
07:00:55.544770 tst                          ping.py: using BVCI 26659
07:00:55.570065 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:00:55.581252 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:00:55.592259 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:00:55.603224 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:00:55.614142 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:00:55.624936 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:00:55.636176 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:00:55.647200 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
07:00:55.944563 tst                       ping.py:19: start network...
07:00:56.081789 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:00:56.606857 run          create_hlr_db(pid=8392): Launched
07:00:56.796307 bus                          /gobi_6: Setting Powered False
07:00:57.816833 run          create_hlr_db(pid=8392): Terminated: ok {rc=0}
07:00:58.238265 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8394): Launched
07:00:58.546325 run    osmo-hlr_10.42.42.2(pid=8395): Launched
07:00:58.662939 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:00:59.200052 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8397): Launched
07:00:59.507540 run    osmo-stp_10.42.42.5(pid=8398): Launched
07:00:59.619313 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:01:00.151284 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8400): Launched
07:01:00.259623 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:01:00.527729 run               patchelf(pid=8401): Launched
07:01:00.706082 run    osmo-stp_10.42.42.5(pid=8398): ERR: Terminated: ERROR {rc=1}  [trial-2371↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8398)]
07:01:00.836796 run    osmo-stp_10.42.42.5(pid=8398): stdout: 
| (launched: 2022-12-10_07:00:59.354662)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:01:00.976734 run    osmo-stp_10.42.42.5(pid=8398): stderr: 
| �[0;m�[38;5;43m20221210070059524 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210070059524 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210070059525 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210070059525 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210070059527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210070059527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210070059528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:01:01.106377 run    osmo-stp_10.42.42.5(pid=8398): stdout: 
| (launched: 2022-12-10_07:00:59.354662)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:01:01.235752 run    osmo-stp_10.42.42.5(pid=8398): stderr: 
| �[0;m�[38;5;43m20221210070059524 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210070059524 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210070059525 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210070059525 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210070059527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210070059527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210070059528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:01:01.386648 run               patchelf(pid=8401): Terminating (SIGINT)
07:01:01.562748 run               patchelf(pid=8401): Terminated: ok {rc=0}
07:01:01.595696 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=8398): Process ended prematurely: osmo-stp_10.42.42.5(pid=8398) [trial-2371↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8398)]  [trial-2371↪gprs:sysmo↪ping.py:22]
07:01:01.605210 tst                       ping.py:22: Test FAILED (6.6 sec)
07:01:01.670728 run    osmo-hlr_10.42.42.2(pid=8395): ERR: Terminated: ERROR {rc=237}  [trial-2371↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8395)]
07:01:01.722954 run    osmo-hlr_10.42.42.2(pid=8395): stdout: 
| (launched: 2022-12-10_07:00:58.392690) 
07:01:01.776140 run    osmo-hlr_10.42.42.2(pid=8395): stderr: 
| �[0;m�[1;31m20221210070058571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210070058571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210070058571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210070058571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210070058571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210070058571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210070058583 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210070058592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210070058592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210070058592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:01:01.821454 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8394): Terminating (SIGTERM)
07:01:01.863647 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8397): Terminating (SIGTERM)
07:01:01.906580 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8400): Terminating (SIGTERM)
07:01:01.918190 ---      ParallelTerminationStrategy: PID 8394 died...
07:01:01.977318 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8394): Terminated: ok {rc=0}
07:01:01.988069 ---      ParallelTerminationStrategy: PID 8397 died...
07:01:02.045828 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8397): Terminated: ok {rc=0}
07:01:02.056520 ---      ParallelTerminationStrategy: PID 8400 died...
07:01:02.114636 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8400): Terminated: ok {rc=0}
07:01:02.203817 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8398): Process ended prematurely: osmo-stp_10.42.42.5(pid=8398) [trial-2371↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8398)]