Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-b200.iperf3.py (from gprs_trx-b200)

Failing for the past 54 builds (Since #2318 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=9791): Process ended prematurely: osmo-stp_10.42.42.5(pid=9791) [trial-2371↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9791)]

Standard Output

----------------------------------------------
trial-2371 gprs:trx-b200 iperf3.py
----------------------------------------------
07:16:49.377447 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:16:49.388361 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
07:16:49.528712 tst                        iperf3.py: using LAC 26744
07:16:49.645595 tst                        iperf3.py: using RAC 224
07:16:49.759637 tst                        iperf3.py: using CellId 26744
07:16:49.878434 tst                        iperf3.py: using BVCI 26745
07:16:49.900737 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:16:49.911224 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:16:49.921528 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:16:49.932018 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:16:49.942466 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:16:49.952842 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:16:49.963483 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:16:49.973956 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:16:49.984463 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
07:16:50.272151 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
07:16:50.404379 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
07:16:50.733040 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9783): Launched
07:16:51.004276 run iperf3-srv_10.42.42.10(pid=9784): Launched
07:16:51.198144 tst                      iperf3.py:8: start network...
07:16:51.330010 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:16:51.833601 run          create_hlr_db(pid=9785): Launched
07:16:52.016209 bus                          /gobi_6: Setting Powered False
07:16:53.036826 run          create_hlr_db(pid=9785): Terminated: ok {rc=0}
07:16:53.439532 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9787): Launched
07:16:53.755051 run    osmo-hlr_10.42.42.2(pid=9788): Launched
07:16:53.869702 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:16:54.418512 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9790): Launched
07:16:54.734374 run    osmo-stp_10.42.42.5(pid=9791): Launched
07:16:54.850108 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:16:55.399449 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9793): Launched
07:16:55.511894 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:16:55.786869 run               patchelf(pid=9794): Launched
07:16:55.971856 run    osmo-stp_10.42.42.5(pid=9791): ERR: Terminated: ERROR {rc=1}  [trial-2371↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9791)]
07:16:56.106990 run    osmo-stp_10.42.42.5(pid=9791): stdout: 
| (launched: 2022-12-10_07:16:54.579599)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:16:56.242460 run    osmo-stp_10.42.42.5(pid=9791): stderr: 
| �[0;m�[38;5;43m20221210071654774 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210071654774 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210071654775 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210071654775 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210071654776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210071654776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210071654776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:16:56.372925 run    osmo-stp_10.42.42.5(pid=9791): stdout: 
| (launched: 2022-12-10_07:16:54.579599)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:16:56.502426 run    osmo-stp_10.42.42.5(pid=9791): stderr: 
| �[0;m�[38;5;43m20221210071654774 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210071654774 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210071654775 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210071654775 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210071654776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210071654776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210071654776 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:16:56.654223 run               patchelf(pid=9794): Terminating (SIGINT)
07:16:56.832169 run               patchelf(pid=9794): Terminated: ok {rc=0}
07:16:56.865447 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=9791): Process ended prematurely: osmo-stp_10.42.42.5(pid=9791) [trial-2371↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9791)]  [trial-2371↪gprs:trx-b200↪iperf3.py:8]
07:16:56.874936 tst                      iperf3.py:8: Test FAILED (7.5 sec)
07:16:56.937213 run    osmo-hlr_10.42.42.2(pid=9788): ERR: Terminated: ERROR {rc=237}  [trial-2371↪gprs:trx-b200↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9788)]
07:16:56.987850 run    osmo-hlr_10.42.42.2(pid=9788): stdout: 
| (launched: 2022-12-10_07:16:53.601194) 
07:16:57.039020 run    osmo-hlr_10.42.42.2(pid=9788): stderr: 
| �[0;m�[1;31m20221210071653800 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210071653800 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210071653801 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210071653801 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210071653801 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210071653801 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210071653825 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:trx-b200/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210071653836 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210071653836 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210071653836 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:16:57.082705 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9783): Terminating (SIGTERM)
07:16:57.123988 run iperf3-srv_10.42.42.10(pid=9784): Terminating (SIGTERM)
07:16:57.165263 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9787): Terminating (SIGTERM)
07:16:57.206390 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9790): Terminating (SIGTERM)
07:16:57.247494 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9793): Terminating (SIGTERM)
07:16:57.256942 ---      ParallelTerminationStrategy: PID 9783 died...
07:16:57.312054 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9783): Terminated: ok {rc=0}
07:16:57.321971 ---      ParallelTerminationStrategy: PID 9784 died...
07:16:57.376552 run iperf3-srv_10.42.42.10(pid=9784): Terminated {rc=256}
07:16:57.386352 ---      ParallelTerminationStrategy: PID 9787 died...
07:16:57.441287 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9787): Terminated: ok {rc=0}
07:16:57.451145 ---      ParallelTerminationStrategy: PID 9790 died...
07:16:57.505933 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9790): Terminated: ok {rc=0}
07:16:57.515828 ---      ParallelTerminationStrategy: PID 9793 died...
07:16:57.571053 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9793): Terminated: ok {rc=0}
07:16:57.657918 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9791): Process ended prematurely: osmo-stp_10.42.42.5(pid=9791) [trial-2371↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9791)]