Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=26832): Process ended prematurely: osmo-stp_10.42.42.5(pid=26832) [trial-2373↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26832)]
Standard Output
---------------------------------------------- trial-2373 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:04:51.603059 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:04:51.614100 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:04:51.754978 tst cs_paging_gprs_active.py: using LAC 27634 10:04:51.871811 tst cs_paging_gprs_active.py: using RAC 94 10:04:51.990827 tst cs_paging_gprs_active.py: using CellId 27634 10:04:52.107617 tst cs_paging_gprs_active.py: using BVCI 27635 10:04:52.131091 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:04:52.141919 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:04:52.152430 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:04:52.162977 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:04:52.173430 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:04:52.183864 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:04:52.194543 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:04:52.204913 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:04:52.215589 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:04:52.333798 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:04:52.616501 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:04:52.742503 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:04:53.055515 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26822): Launched 10:04:53.314275 run iperf3-srv_10.42.42.10(pid=26823): Launched 10:04:53.498242 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:04:53.623626 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:04:53.935991 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26824): Launched 10:04:54.194357 run iperf3-srv_10.42.42.10(pid=26825): Launched 10:04:54.377839 tst cs_paging_gprs_active.py:38: start network... 10:04:54.502719 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:04:54.986347 run create_hlr_db(pid=26826): Launched 10:04:55.161898 bus /gobi_6: Setting Powered False 10:04:56.181692 run create_hlr_db(pid=26826): Terminated: ok {rc=0} 10:04:56.611403 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26828): Launched 10:04:56.934141 run osmo-hlr_10.42.42.2(pid=26829): Launched 10:04:57.055662 run osmo-stp_10.42.42.5: Starting osmo-stp 10:04:57.617490 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26831): Launched 10:04:57.939221 run osmo-stp_10.42.42.5(pid=26832): Launched 10:04:58.056057 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:04:58.618445 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26834): Launched 10:04:58.733381 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:04:59.013801 run patchelf(pid=26835): Launched 10:04:59.202189 run osmo-stp_10.42.42.5(pid=26832): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26832)] 10:04:59.339860 run osmo-stp_10.42.42.5(pid=26832): stdout: | (launched: 2022-12-10_10:04:57.781308) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:04:59.477994 run osmo-stp_10.42.42.5(pid=26832): stderr: | �[0;m�[38;5;43m20221210100457972 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210100457972 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210100457973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210100457973 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210100457973 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210100457974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210100457974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:04:59.612138 run osmo-stp_10.42.42.5(pid=26832): stdout: | (launched: 2022-12-10_10:04:57.781308) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:04:59.744098 run osmo-stp_10.42.42.5(pid=26832): stderr: | �[0;m�[38;5;43m20221210100457972 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210100457972 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210100457973 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210100457973 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210100457973 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210100457974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210100457974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:04:59.898395 run patchelf(pid=26835): Terminating (SIGINT) 10:05:00.079405 run patchelf(pid=26835): Terminated: ok {rc=0} 10:05:00.112783 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26832): Process ended prematurely: osmo-stp_10.42.42.5(pid=26832) [trial-2373↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26832)] [trial-2373↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:05:00.122618 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 10:05:00.186237 run osmo-hlr_10.42.42.2(pid=26829): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26829)] 10:05:00.237587 run osmo-hlr_10.42.42.2(pid=26829): stdout: | (launched: 2022-12-10_10:04:56.775402) 10:05:00.289654 run osmo-hlr_10.42.42.2(pid=26829): stderr: | �[0;m�[1;31m20221210100456973 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210100456973 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210100456973 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210100456973 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210100456973 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210100456973 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210100456985 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210100456993 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210100456994 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210100456994 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:05:00.334084 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26822): Terminating (SIGTERM) 10:05:00.376021 run iperf3-srv_10.42.42.10(pid=26823): Terminating (SIGTERM) 10:05:00.418492 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26824): Terminating (SIGTERM) 10:05:00.460041 run iperf3-srv_10.42.42.10(pid=26825): Terminating (SIGTERM) 10:05:00.502651 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26828): Terminating (SIGTERM) 10:05:00.544729 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26831): Terminating (SIGTERM) 10:05:00.586456 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26834): Terminating (SIGTERM) 10:05:00.595902 --- ParallelTerminationStrategy: PID 26822 died... 10:05:00.652155 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26822): Terminated: ok {rc=0} 10:05:00.662142 --- ParallelTerminationStrategy: PID 26823 died... 10:05:00.717274 run iperf3-srv_10.42.42.10(pid=26823): Terminated {rc=256} 10:05:00.727367 --- ParallelTerminationStrategy: PID 26824 died... 10:05:00.782947 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26824): Terminated: ok {rc=0} 10:05:00.792760 --- ParallelTerminationStrategy: PID 26825 died... 10:05:00.856547 run iperf3-srv_10.42.42.10(pid=26825): Terminated {rc=256} 10:05:00.875058 --- ParallelTerminationStrategy: PID 26828 died... 10:05:00.935060 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26828): Terminated: ok {rc=0} 10:05:00.945437 --- ParallelTerminationStrategy: PID 26831 died... 10:05:01.001409 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26831): Terminated: ok {rc=0} 10:05:01.012064 --- ParallelTerminationStrategy: PID 26834 died... 10:05:01.069480 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26834): Terminated: ok {rc=0} 10:05:01.176873 bus /gobi_0: Setting Powered False 10:05:02.286917 bus /gobi_0: Setting Powered False 10:05:03.394714 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26832): Process ended prematurely: osmo-stp_10.42.42.5(pid=26832) [trial-2373↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26832)]