Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping.py (from gprs_sysmo)

Failing for the past 43 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=26111): Process ended prematurely: osmo-stp_10.42.42.5(pid=26111) [trial-2373↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26111)]

Standard Output

----------------------------------------------
trial-2373 gprs:sysmo ping.py
----------------------------------------------
09:54:41.783078 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:54:41.794147 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
09:54:41.922293 tst                          ping.py: using LAC 27580
09:54:42.046022 tst                          ping.py: using RAC 40
09:54:42.169553 tst                          ping.py: using CellId 27580
09:54:42.293303 tst                          ping.py: using BVCI 27581
09:54:42.317920 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:54:42.329107 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:54:42.340048 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:54:42.351604 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:54:42.362518 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:54:42.373491 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:54:42.384592 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
09:54:42.395796 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
09:54:42.671163 tst                       ping.py:19: start network...
09:54:42.794588 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
09:54:43.270207 run         create_hlr_db(pid=26105): Launched
09:54:43.441852 bus                          /gobi_6: Setting Powered False
09:54:44.463299 run         create_hlr_db(pid=26105): Terminated: ok {rc=0}
09:54:44.884106 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26107): Launched
09:54:45.199795 run   osmo-hlr_10.42.42.2(pid=26108): Launched
09:54:45.317076 run              osmo-stp_10.42.42.5: Starting osmo-stp
09:54:45.871860 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26110): Launched
09:54:46.305569 run   osmo-stp_10.42.42.5(pid=26111): Launched
09:54:46.522017 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
09:54:47.092159 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26113): Launched
09:54:47.200324 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
09:54:47.467862 run              patchelf(pid=26114): Launched
09:54:47.643475 run   osmo-stp_10.42.42.5(pid=26111): ERR: Terminated: ERROR {rc=1}  [trial-2373↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26111)]
09:54:47.771960 run   osmo-stp_10.42.42.5(pid=26111): stdout: 
| (launched: 2022-12-10_09:54:46.044050)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:54:47.900547 run   osmo-stp_10.42.42.5(pid=26111): stderr: 
| �[0;m�[38;5;43m20221210095446332 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210095446332 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210095446333 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210095446333 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210095446334 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210095446334 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210095446334 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:54:48.024785 run   osmo-stp_10.42.42.5(pid=26111): stdout: 
| (launched: 2022-12-10_09:54:46.044050)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:54:48.147490 run   osmo-stp_10.42.42.5(pid=26111): stderr: 
| �[0;m�[38;5;43m20221210095446332 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210095446332 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210095446333 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210095446333 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210095446334 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210095446334 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210095446334 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:54:48.290604 run              patchelf(pid=26114): Terminating (SIGINT)
09:54:48.458536 run              patchelf(pid=26114): Terminated: ok {rc=0}
09:54:48.489126 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=26111): Process ended prematurely: osmo-stp_10.42.42.5(pid=26111) [trial-2373↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26111)]  [trial-2373↪gprs:sysmo↪ping.py:22]
09:54:48.497630 tst                       ping.py:22: Test FAILED (6.7 sec)
09:54:48.557569 run   osmo-hlr_10.42.42.2(pid=26108): ERR: Terminated: ERROR {rc=237}  [trial-2373↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26108)]
09:54:48.607020 run   osmo-hlr_10.42.42.2(pid=26108): stdout: 
| (launched: 2022-12-10_09:54:45.045462) 
09:54:48.657083 run   osmo-hlr_10.42.42.2(pid=26108): stderr: 
| �[0;m�[1;31m20221210095445245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210095445245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210095445245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210095445245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210095445246 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210095445246 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210095445270 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210095445281 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210095445281 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210095445281 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
09:54:48.699413 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26107): Terminating (SIGTERM)
09:54:48.739625 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26110): Terminating (SIGTERM)
09:54:48.779871 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26113): Terminating (SIGTERM)
09:54:48.789376 ---      ParallelTerminationStrategy: PID 26107 died...
09:54:48.843418 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26107): Terminated: ok {rc=0}
09:54:48.853096 ---      ParallelTerminationStrategy: PID 26110 died...
09:54:48.906245 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26110): Terminated: ok {rc=0}
09:54:48.915778 ---      ParallelTerminationStrategy: PID 26113 died...
09:54:48.968988 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26113): Terminated: ok {rc=0}
09:54:49.057046 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26111): Process ended prematurely: osmo-stp_10.42.42.5(pid=26111) [trial-2373↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26111)]