Failed
gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=30442): Process ended prematurely: osmo-stp_10.42.42.5(pid=30442) [trial-2373↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30442)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-lms-limenet-micro ping.py ---------------------------------------------- 10:45:04.198696 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:45:04.210569 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 10:45:04.349273 tst ping.py: using LAC 27848 10:45:04.469207 tst ping.py: using RAC 53 10:45:04.585747 tst ping.py: using CellId 27848 10:45:04.701963 tst ping.py: using BVCI 27849 10:45:04.724332 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:45:04.735149 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:45:04.745800 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:45:04.756438 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:45:04.767015 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:45:04.778042 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:45:04.788696 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 10:45:04.799217 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 10:45:05.069989 tst ping.py:19: start network... 10:45:05.191658 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:45:05.663136 run create_hlr_db(pid=30436): Launched 10:45:05.833719 bus /gobi_6: Setting Powered False 10:45:06.855234 run create_hlr_db(pid=30436): Terminated: ok {rc=0} 10:45:07.249311 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30438): Launched 10:45:07.545142 run osmo-hlr_10.42.42.2(pid=30439): Launched 10:45:07.652094 run osmo-stp_10.42.42.5: Starting osmo-stp 10:45:08.165836 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30441): Launched 10:45:08.460369 run osmo-stp_10.42.42.5(pid=30442): Launched 10:45:08.567665 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:45:09.082056 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30444): Launched 10:45:09.186267 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:45:09.442835 run patchelf(pid=30445): Launched 10:45:09.615030 run osmo-stp_10.42.42.5(pid=30442): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30442)] 10:45:09.741333 run osmo-stp_10.42.42.5(pid=30442): stdout: | (launched: 2022-12-10_10:45:08.315270) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:45:09.868114 run osmo-stp_10.42.42.5(pid=30442): stderr: | �[0;m�[38;5;43m20221210104508487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210104508487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210104508487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210104508488 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210104508488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210104508488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210104508488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:45:09.990076 run osmo-stp_10.42.42.5(pid=30442): stdout: | (launched: 2022-12-10_10:45:08.315270) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:45:10.111401 run osmo-stp_10.42.42.5(pid=30442): stderr: | �[0;m�[38;5;43m20221210104508487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210104508487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210104508487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210104508488 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210104508488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210104508488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210104508488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:45:10.252599 run patchelf(pid=30445): Terminating (SIGINT) 10:45:10.418455 run patchelf(pid=30445): Terminated: ok {rc=0} 10:45:10.448648 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=30442): Process ended prematurely: osmo-stp_10.42.42.5(pid=30442) [trial-2373↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30442)] [trial-2373↪gprs:trx-lms-limenet-micro↪ping.py:22] 10:45:10.457084 tst ping.py:22: Test FAILED (6.2 sec) 10:45:10.516640 run osmo-hlr_10.42.42.2(pid=30439): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30439)] 10:45:10.565382 run osmo-hlr_10.42.42.2(pid=30439): stdout: | (launched: 2022-12-10_10:45:07.398796) 10:45:10.615576 run osmo-hlr_10.42.42.2(pid=30439): stderr: | �[0;m�[1;31m20221210104507573 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210104507573 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210104507573 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210104507573 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210104507573 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210104507573 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210104507605 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210104507616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210104507616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210104507616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:45:10.657516 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30438): Terminating (SIGTERM) 10:45:10.697010 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30441): Terminating (SIGTERM) 10:45:10.736222 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30444): Terminating (SIGTERM) 10:45:10.745263 --- ParallelTerminationStrategy: PID 30438 died... 10:45:10.798140 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30438): Terminated: ok {rc=0} 10:45:10.807573 --- ParallelTerminationStrategy: PID 30441 died... 10:45:10.860036 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30441): Terminated: ok {rc=0} 10:45:10.869662 --- ParallelTerminationStrategy: PID 30444 died... 10:45:10.922057 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30444): Terminated: ok {rc=0} 10:45:11.010554 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30442): Process ended prematurely: osmo-stp_10.42.42.5(pid=30442) [trial-2373↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30442)]