Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping.py (from gprs_trx-lms)

Failing for the past 47 builds (Since #2327 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=29617): Process ended prematurely: osmo-stp_10.42.42.5(pid=29617) [trial-2373↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29617)]

Standard Output

----------------------------------------------
trial-2373 gprs:trx-lms ping.py
----------------------------------------------
10:37:09.243656 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:09.255533 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
10:37:09.399665 tst                          ping.py: using LAC 27806
10:37:09.523778 tst                          ping.py: using RAC 11
10:37:09.642951 tst                          ping.py: using CellId 27806
10:37:09.758931 tst                          ping.py: using BVCI 27807
10:37:09.781730 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:09.792347 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:09.803148 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:09.814160 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:09.824868 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:09.835422 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:09.846139 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:37:09.856713 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
10:37:10.144047 tst                       ping.py:19: start network...
10:37:10.276736 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:37:10.776245 run         create_hlr_db(pid=29611): Launched
10:37:10.961089 bus                          /gobi_6: Setting Powered False
10:37:11.981356 run         create_hlr_db(pid=29611): Terminated: ok {rc=0}
10:37:12.382285 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29613): Launched
10:37:12.680575 run   osmo-hlr_10.42.42.2(pid=29614): Launched
10:37:12.793832 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:37:13.313819 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29616): Launched
10:37:13.611871 run   osmo-stp_10.42.42.5(pid=29617): Launched
10:37:13.720460 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:37:14.241207 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29619): Launched
10:37:14.346662 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:37:14.606061 run              patchelf(pid=29620): Launched
10:37:14.780217 run   osmo-stp_10.42.42.5(pid=29617): ERR: Terminated: ERROR {rc=1}  [trial-2373↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29617)]
10:37:14.907664 run   osmo-stp_10.42.42.5(pid=29617): stdout: 
| (launched: 2022-12-10_10:37:13.464800)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:37:15.035651 run   osmo-stp_10.42.42.5(pid=29617): stderr: 
| �[0;m�[38;5;43m20221210103713635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210103713635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210103713636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210103713636 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210103713636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210103713637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210103713637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:37:15.159038 run   osmo-stp_10.42.42.5(pid=29617): stdout: 
| (launched: 2022-12-10_10:37:13.464800)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:37:15.281951 run   osmo-stp_10.42.42.5(pid=29617): stderr: 
| �[0;m�[38;5;43m20221210103713635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210103713635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210103713636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210103713636 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210103713636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210103713637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210103713637 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:37:15.425522 run              patchelf(pid=29620): Terminating (SIGINT)
10:37:15.594134 run              patchelf(pid=29620): Terminated: ok {rc=0}
10:37:15.624808 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=29617): Process ended prematurely: osmo-stp_10.42.42.5(pid=29617) [trial-2373↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29617)]  [trial-2373↪gprs:trx-lms↪ping.py:22]
10:37:15.633677 tst                       ping.py:22: Test FAILED (6.4 sec)
10:37:15.693179 run   osmo-hlr_10.42.42.2(pid=29614): ERR: Terminated: ERROR {rc=237}  [trial-2373↪gprs:trx-lms↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29614)]
10:37:15.741701 run   osmo-hlr_10.42.42.2(pid=29614): stdout: 
| (launched: 2022-12-10_10:37:12.533883) 
10:37:15.790756 run   osmo-hlr_10.42.42.2(pid=29614): stderr: 
| �[0;m�[1;31m20221210103712710 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210103712710 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210103712710 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210103712710 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210103712710 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210103712710 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210103712722 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-lms/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210103712732 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210103712733 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210103712733 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:37:15.849162 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29613): Terminating (SIGTERM)
10:37:15.900689 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29616): Terminating (SIGTERM)
10:37:15.947189 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29619): Terminating (SIGTERM)
10:37:15.956537 ---      ParallelTerminationStrategy: PID 29613 died...
10:37:16.019716 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29613): Terminated: ok {rc=0}
10:37:16.030345 ---      ParallelTerminationStrategy: PID 29616 died...
10:37:16.084822 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29616): Terminated: ok {rc=0}
10:37:16.094890 ---      ParallelTerminationStrategy: PID 29619 died...
10:37:16.149450 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29619): Terminated: ok {rc=0}
10:37:16.234295 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29617): Process ended prematurely: osmo-stp_10.42.42.5(pid=29617) [trial-2373↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29617)]