Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=29171): Process ended prematurely: osmo-stp_10.42.42.5(pid=29171) [trial-2373↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29171)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:30:35.799904 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:35.810821 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:30:35.970453 tst cs_paging_gprs_active.py: using LAC 27771 10:30:36.086975 tst cs_paging_gprs_active.py: using RAC 231 10:30:36.205127 tst cs_paging_gprs_active.py: using CellId 27771 10:30:36.321849 tst cs_paging_gprs_active.py: using BVCI 27772 10:30:36.344653 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:36.355453 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:36.366152 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:36.376826 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:36.387470 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:36.398096 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:36.408776 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:36.419389 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:36.430141 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:30:36.550304 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:30:36.834590 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:30:36.960798 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:30:37.276230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29161): Launched 10:30:37.536914 run iperf3-srv_10.42.42.10(pid=29162): Launched 10:30:37.721658 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:30:37.847165 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:30:38.161442 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29163): Launched 10:30:38.420861 run iperf3-srv_10.42.42.10(pid=29164): Launched 10:30:38.605143 tst cs_paging_gprs_active.py:38: start network... 10:30:38.730276 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:30:39.215898 run create_hlr_db(pid=29165): Launched 10:30:39.390263 bus /gobi_6: Setting Powered False 10:30:40.410570 run create_hlr_db(pid=29165): Terminated: ok {rc=0} 10:30:40.836650 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29167): Launched 10:30:41.157788 run osmo-hlr_10.42.42.2(pid=29168): Launched 10:30:41.274023 run osmo-stp_10.42.42.5: Starting osmo-stp 10:30:41.832180 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29170): Launched 10:30:42.153533 run osmo-stp_10.42.42.5(pid=29171): Launched 10:30:42.270579 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:30:42.832213 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29173): Launched 10:30:42.947657 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:30:43.230173 run patchelf(pid=29174): Launched 10:30:43.419218 run osmo-stp_10.42.42.5(pid=29171): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29171)] 10:30:43.556587 run osmo-stp_10.42.42.5(pid=29171): stdout: | (launched: 2022-12-10_10:30:41.995964) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:30:43.694412 run osmo-stp_10.42.42.5(pid=29171): stderr: | �[0;m�[38;5;43m20221210103042186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210103042186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210103042187 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210103042187 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210103042189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210103042190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210103042190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:30:43.827205 run osmo-stp_10.42.42.5(pid=29171): stdout: | (launched: 2022-12-10_10:30:41.995964) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:30:43.959082 run osmo-stp_10.42.42.5(pid=29171): stderr: | �[0;m�[38;5;43m20221210103042186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210103042186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210103042187 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210103042187 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210103042189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210103042190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210103042190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:30:44.113086 run patchelf(pid=29174): Terminating (SIGINT) 10:30:44.294048 run patchelf(pid=29174): Terminated: ok {rc=0} 10:30:44.327785 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29171): Process ended prematurely: osmo-stp_10.42.42.5(pid=29171) [trial-2373↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29171)] [trial-2373↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:30:44.337689 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 10:30:44.401700 run osmo-hlr_10.42.42.2(pid=29168): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29168)] 10:30:44.453385 run osmo-hlr_10.42.42.2(pid=29168): stdout: | (launched: 2022-12-10_10:30:41.000427) 10:30:44.505467 run osmo-hlr_10.42.42.2(pid=29168): stderr: | �[0;m�[1;31m20221210103041197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210103041197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210103041197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210103041197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210103041198 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210103041198 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210103041209 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210103041218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210103041218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210103041218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:30:44.549930 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29161): Terminating (SIGTERM) 10:30:44.592345 run iperf3-srv_10.42.42.10(pid=29162): Terminating (SIGTERM) 10:30:44.634663 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29163): Terminating (SIGTERM) 10:30:44.677195 run iperf3-srv_10.42.42.10(pid=29164): Terminating (SIGTERM) 10:30:44.719411 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29167): Terminating (SIGTERM) 10:30:44.761741 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29170): Terminating (SIGTERM) 10:30:44.803980 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29173): Terminating (SIGTERM) 10:30:44.813712 --- ParallelTerminationStrategy: PID 29161 died... 10:30:44.870357 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29161): Terminated: ok {rc=0} 10:30:44.880665 --- ParallelTerminationStrategy: PID 29162 died... 10:30:44.936685 run iperf3-srv_10.42.42.10(pid=29162): Terminated {rc=256} 10:30:44.946620 --- ParallelTerminationStrategy: PID 29163 died... 10:30:45.002732 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29163): Terminated: ok {rc=0} 10:30:45.012668 --- ParallelTerminationStrategy: PID 29164 died... 10:30:45.068833 run iperf3-srv_10.42.42.10(pid=29164): Terminated {rc=256} 10:30:45.078809 --- ParallelTerminationStrategy: PID 29167 died... 10:30:45.134860 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29167): Terminated: ok {rc=0} 10:30:45.145389 --- ParallelTerminationStrategy: PID 29170 died... 10:30:45.201554 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29170): Terminated: ok {rc=0} 10:30:45.211747 --- ParallelTerminationStrategy: PID 29173 died... 10:30:45.267757 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29173): Terminated: ok {rc=0} 10:30:45.352773 bus /gobi_0: Setting Powered False 10:30:46.459455 bus /gobi_0: Setting Powered False 10:30:47.571551 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29171): Process ended prematurely: osmo-stp_10.42.42.5(pid=29171) [trial-2373↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29171)]