Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping.py (from gprs_trx-lms)

Failing for the past 48 builds (Since #2327 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=5831): Process ended prematurely: osmo-stp_10.42.42.5(pid=5831) [trial-2374↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5831)]

Standard Output

----------------------------------------------
trial-2374 gprs:trx-lms ping.py
----------------------------------------------
12:04:07.269793 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:04:07.281381 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
12:04:07.423371 tst                          ping.py: using LAC 28267
12:04:07.546657 tst                          ping.py: using RAC 217
12:04:07.671939 tst                          ping.py: using CellId 28267
12:04:07.791787 tst                          ping.py: using BVCI 28268
12:04:07.814272 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:04:07.824738 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:04:07.835110 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:04:07.846266 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:04:07.857101 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:04:07.867900 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:04:07.879074 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:04:07.890024 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
12:04:08.161087 tst                       ping.py:19: start network...
12:04:08.283669 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
12:04:08.757879 run          create_hlr_db(pid=5825): Launched
12:04:08.928319 bus                          /gobi_6: Setting Powered False
12:04:09.949733 run          create_hlr_db(pid=5825): Terminated: ok {rc=0}
12:04:10.369360 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5827): Launched
12:04:10.684422 run    osmo-hlr_10.42.42.2(pid=5828): Launched
12:04:10.801992 run              osmo-stp_10.42.42.5: Starting osmo-stp
12:04:11.353854 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5830): Launched
12:04:11.671125 run    osmo-stp_10.42.42.5(pid=5831): Launched
12:04:11.784858 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
12:04:12.335397 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5833): Launched
12:04:12.448078 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
12:04:12.723633 run               patchelf(pid=5834): Launched
12:04:12.908484 run    osmo-stp_10.42.42.5(pid=5831): ERR: Terminated: ERROR {rc=1}  [trial-2374↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5831)]
12:04:13.043557 run    osmo-stp_10.42.42.5(pid=5831): stdout: 
| (launched: 2022-12-10_12:04:11.514676)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:04:13.180052 run    osmo-stp_10.42.42.5(pid=5831): stderr: 
| �[0;m�[38;5;43m20221210120411708 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210120411708 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210120411708 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210120411709 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210120411709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210120411709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210120411709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:04:13.311282 run    osmo-stp_10.42.42.5(pid=5831): stdout: 
| (launched: 2022-12-10_12:04:11.514676)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:04:13.440760 run    osmo-stp_10.42.42.5(pid=5831): stderr: 
| �[0;m�[38;5;43m20221210120411708 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210120411708 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210120411708 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210120411709 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210120411709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210120411709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210120411709 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:04:13.591539 run               patchelf(pid=5834): Terminating (SIGINT)
12:04:13.768251 run               patchelf(pid=5834): Terminated: ok {rc=0}
12:04:13.800549 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=5831): Process ended prematurely: osmo-stp_10.42.42.5(pid=5831) [trial-2374↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5831)]  [trial-2374↪gprs:trx-lms↪ping.py:22]
12:04:13.810039 tst                       ping.py:22: Test FAILED (6.5 sec)
12:04:13.872837 run    osmo-hlr_10.42.42.2(pid=5828): ERR: Terminated: ERROR {rc=237}  [trial-2374↪gprs:trx-lms↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5828)]
12:04:13.924303 run    osmo-hlr_10.42.42.2(pid=5828): stdout: 
| (launched: 2022-12-10_12:04:10.529918) 
12:04:13.976343 run    osmo-hlr_10.42.42.2(pid=5828): stderr: 
| �[0;m�[1;31m20221210120410727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210120410727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210120410727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210120410727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210120410727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210120410727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210120410752 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-lms/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210120410763 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210120410763 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210120410763 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
12:04:14.020506 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5827): Terminating (SIGTERM)
12:04:14.062289 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5830): Terminating (SIGTERM)
12:04:14.104296 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5833): Terminating (SIGTERM)
12:04:14.114120 ---      ParallelTerminationStrategy: PID 5827 died...
12:04:14.170174 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5827): Terminated: ok {rc=0}
12:04:14.180189 ---      ParallelTerminationStrategy: PID 5830 died...
12:04:14.235492 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5830): Terminated: ok {rc=0}
12:04:14.245693 ---      ParallelTerminationStrategy: PID 5833 died...
12:04:14.301244 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5833): Terminated: ok {rc=0}
12:04:14.387467 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5831): Process ended prematurely: osmo-stp_10.42.42.5(pid=5831) [trial-2374↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5831)]