Failed
dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=14916): Process ended prematurely: osmo-stp_10.42.42.5(pid=14916) [trial-2375↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14916)]
Standard Output
---------------------------------------------- trial-2375 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 13:41:52.062879 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:41:52.074073 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 13:41:52.219688 tst switch_tch_pdch.py: using LAC 28787 13:41:52.332238 tst switch_tch_pdch.py: using RAC 227 13:41:52.450128 tst switch_tch_pdch.py: using CellId 28787 13:41:52.563405 tst switch_tch_pdch.py: using BVCI 28788 13:41:52.585710 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:41:52.596703 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:41:52.607592 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:41:52.618590 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:41:52.629518 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:41:52.640299 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:41:52.651310 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:41:52.662297 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 13:41:52.779682 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 13:41:53.064790 tst switch_tch_pdch.py:51: start network... 13:41:53.193802 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:41:53.681453 run create_hlr_db(pid=14910): Launched 13:41:53.861773 bus /gobi_6: Setting Powered False 13:41:54.881760 run create_hlr_db(pid=14910): Terminated: ok {rc=0} 13:41:55.272012 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14912): Launched 13:41:55.562714 run osmo-hlr_10.42.42.2(pid=14913): Launched 13:41:55.673273 run osmo-stp_10.42.42.5: Starting osmo-stp 13:41:56.177616 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14915): Launched 13:41:56.467660 run osmo-stp_10.42.42.5(pid=14916): Launched 13:41:56.573926 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:41:57.078872 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14918): Launched 13:41:57.182147 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:41:57.434855 run patchelf(pid=14919): Launched 13:41:57.605220 run osmo-stp_10.42.42.5(pid=14916): ERR: Terminated: ERROR {rc=1} [trial-2375↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14916)] 13:41:57.729196 run osmo-stp_10.42.42.5(pid=14916): stdout: | (launched: 2022-12-10_13:41:56.325505) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:41:57.853701 run osmo-stp_10.42.42.5(pid=14916): stderr: | �[0;m�[38;5;43m20221210134156494 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210134156494 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210134156494 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210134156495 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210134156497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210134156497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210134156497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:41:57.974317 run osmo-stp_10.42.42.5(pid=14916): stdout: | (launched: 2022-12-10_13:41:56.325505) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:41:58.093938 run osmo-stp_10.42.42.5(pid=14916): stderr: | �[0;m�[38;5;43m20221210134156494 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210134156494 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210134156494 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210134156495 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210134156497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210134156497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210134156497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:41:58.234093 run patchelf(pid=14919): Terminating (SIGINT) 13:41:58.397797 run patchelf(pid=14919): Terminated: ok {rc=0} 13:41:58.427693 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=14916): Process ended prematurely: osmo-stp_10.42.42.5(pid=14916) [trial-2375↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14916)] [trial-2375↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 13:41:58.436088 tst switch_tch_pdch.py:54: Test FAILED (6.4 sec) 13:41:58.494730 run osmo-hlr_10.42.42.2(pid=14913): ERR: Terminated: ERROR {rc=237} [trial-2375↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14913)] 13:41:58.542719 run osmo-hlr_10.42.42.2(pid=14913): stdout: | (launched: 2022-12-10_13:41:55.419386) 13:41:58.591350 run osmo-hlr_10.42.42.2(pid=14913): stderr: | �[0;m�[1;31m20221210134155593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210134155593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210134155593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210134155593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210134155593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210134155593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210134155606 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210134155616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210134155616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210134155616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:41:58.632685 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14912): Terminating (SIGTERM) 13:41:58.671653 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14915): Terminating (SIGTERM) 13:41:58.710625 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14918): Terminating (SIGTERM) 13:41:58.719660 --- ParallelTerminationStrategy: PID 14912 died... 13:41:58.771745 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14912): Terminated: ok {rc=0} 13:41:58.781344 --- ParallelTerminationStrategy: PID 14915 died... 13:41:58.833169 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14915): Terminated: ok {rc=0} 13:41:58.842568 --- ParallelTerminationStrategy: PID 14918 died... 13:41:58.894395 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14918): Terminated: ok {rc=0} 13:41:58.980394 bus /gobi_0: Setting Powered False 13:42:00.081856 bus /gobi_0: Setting Powered False 13:42:01.213415 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14916): Process ended prematurely: osmo-stp_10.42.42.5(pid=14916) [trial-2375↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14916)]