Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=16047): Process ended prematurely: osmo-stp_10.42.42.5(pid=16047) [trial-2375↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16047)]
Standard Output
---------------------------------------------- trial-2375 gprs:nanobts+band-900+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 13:53:55.695394 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:53:55.707560 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:53:55.863844 tst ping_idle_ping.py: using LAC 28852 13:53:55.982774 tst ping_idle_ping.py: using RAC 37 13:53:56.105961 tst ping_idle_ping.py: using CellId 28852 13:53:56.230760 tst ping_idle_ping.py: using BVCI 28853 13:53:56.255148 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:53:56.266597 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:53:56.277969 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:53:56.289918 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:53:56.301872 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:53:56.313866 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:53:56.326179 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:53:56.338158 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:53:56.612927 tst ping_idle_ping.py:24: start network... 13:53:56.736212 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:53:57.212983 run create_hlr_db(pid=16041): Launched 13:53:57.383287 bus /gobi_6: Setting Powered False 13:53:58.405527 run create_hlr_db(pid=16041): Terminated: ok {rc=0} 13:53:58.799502 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16043): Launched 13:53:59.095427 run osmo-hlr_10.42.42.2(pid=16044): Launched 13:53:59.212287 run osmo-stp_10.42.42.5: Starting osmo-stp 13:53:59.728129 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16046): Launched 13:54:00.023074 run osmo-stp_10.42.42.5(pid=16047): Launched 13:54:00.130055 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:54:00.643340 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16049): Launched 13:54:00.747651 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:54:01.056901 run patchelf(pid=16050): Launched 13:54:01.248156 run osmo-stp_10.42.42.5(pid=16047): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16047)] 13:54:01.389343 run osmo-stp_10.42.42.5(pid=16047): stdout: | (launched: 2022-12-10_13:53:59.877537) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:54:01.529264 run osmo-stp_10.42.42.5(pid=16047): stderr: | �[0;m�[38;5;43m20221210135400046 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210135400046 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210135400047 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210135400047 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210135400047 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210135400047 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210135400048 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:54:01.667837 run osmo-stp_10.42.42.5(pid=16047): stdout: | (launched: 2022-12-10_13:53:59.877537) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:54:01.803192 run osmo-stp_10.42.42.5(pid=16047): stderr: | �[0;m�[38;5;43m20221210135400046 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210135400046 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210135400047 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210135400047 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210135400047 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210135400047 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210135400048 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:54:01.959852 run patchelf(pid=16050): Terminating (SIGINT) 13:54:02.143949 run patchelf(pid=16050): Terminated: ok {rc=0} 13:54:02.177223 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=16047): Process ended prematurely: osmo-stp_10.42.42.5(pid=16047) [trial-2375↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16047)] [trial-2375↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 13:54:02.187193 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 13:54:02.252377 run osmo-hlr_10.42.42.2(pid=16044): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16044)] 13:54:02.304492 run osmo-hlr_10.42.42.2(pid=16044): stdout: | (launched: 2022-12-10_13:53:58.949781) 13:54:02.357483 run osmo-hlr_10.42.42.2(pid=16044): stderr: | �[0;m�[1;31m20221210135359125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210135359125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210135359125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210135359125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210135359125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210135359125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210135359136 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:nanobts+band-900+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210135359147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210135359147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210135359147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:54:02.401995 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16043): Terminating (SIGTERM) 13:54:02.444706 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16046): Terminating (SIGTERM) 13:54:02.487955 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16049): Terminating (SIGTERM) 13:54:02.497986 --- ParallelTerminationStrategy: PID 16043 died... 13:54:02.554354 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16043): Terminated: ok {rc=0} 13:54:02.565542 --- ParallelTerminationStrategy: PID 16046 died... 13:54:02.622611 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16046): Terminated: ok {rc=0} 13:54:02.632769 --- ParallelTerminationStrategy: PID 16049 died... 13:54:02.689355 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16049): Terminated: ok {rc=0} 13:54:02.776477 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16047): Process ended prematurely: osmo-stp_10.42.42.5(pid=16047) [trial-2375↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16047)]