Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=16095): Process ended prematurely: osmo-stp_10.42.42.5(pid=16095) [trial-2375↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16095)]
Standard Output
---------------------------------------------- trial-2375 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 13:54:26.939965 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:26.951742 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 13:54:27.089173 tst iperf3m4.py: using LAC 28855 13:54:27.205721 tst iperf3m4.py: using RAC 40 13:54:27.321891 tst iperf3m4.py: using CellId 28855 13:54:27.438688 tst iperf3m4.py: using BVCI 28856 13:54:27.461502 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:27.472508 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:27.483609 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:27.494637 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:27.505635 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:27.516598 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:27.527610 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:27.538512 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:54:27.549649 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:54:27.670470 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:54:27.788672 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:54:27.907415 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:54:28.183967 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 13:54:28.308386 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:54:28.615111 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16081): Launched 13:54:28.869449 run iperf3-srv_10.42.42.10(pid=16082): Launched 13:54:29.049835 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 13:54:29.173371 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:54:29.478808 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16083): Launched 13:54:29.734222 run iperf3-srv_10.42.42.10(pid=16084): Launched 13:54:29.914820 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 13:54:30.038480 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:54:30.345870 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16085): Launched 13:54:30.601197 run iperf3-srv_10.42.42.10(pid=16086): Launched 13:54:30.781766 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 13:54:30.906935 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:54:31.244542 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16087): Launched 13:54:31.540784 run iperf3-srv_10.42.42.10(pid=16088): Launched 13:54:31.725806 tst iperf3m4.py:8: start network... 13:54:31.851898 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:54:32.332718 run create_hlr_db(pid=16089): Launched 13:54:32.503306 bus /gobi_6: Setting Powered False 13:54:33.524759 run create_hlr_db(pid=16089): Terminated: ok {rc=0} 13:54:33.943891 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16091): Launched 13:54:34.259320 run osmo-hlr_10.42.42.2(pid=16092): Launched 13:54:34.376607 run osmo-stp_10.42.42.5: Starting osmo-stp 13:54:34.923763 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16094): Launched 13:54:35.221240 run osmo-stp_10.42.42.5(pid=16095): Launched 13:54:35.329121 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:54:35.846888 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16097): Launched 13:54:35.953227 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:54:36.212597 run patchelf(pid=16098): Launched 13:54:36.386885 run osmo-stp_10.42.42.5(pid=16095): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16095)] 13:54:36.514082 run osmo-stp_10.42.42.5(pid=16095): stdout: | (launched: 2022-12-10_13:54:35.075486) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:54:36.641562 run osmo-stp_10.42.42.5(pid=16095): stderr: | �[0;m�[38;5;43m20221210135435246 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210135435246 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210135435246 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210135435247 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210135435247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210135435247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210135435247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:54:36.764813 run osmo-stp_10.42.42.5(pid=16095): stdout: | (launched: 2022-12-10_13:54:35.075486) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:54:36.887637 run osmo-stp_10.42.42.5(pid=16095): stderr: | �[0;m�[38;5;43m20221210135435246 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210135435246 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210135435246 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210135435247 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210135435247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210135435247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210135435247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:54:37.030113 run patchelf(pid=16098): Terminating (SIGINT) 13:54:37.197638 run patchelf(pid=16098): Terminated: ok {rc=0} 13:54:37.228341 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16095): Process ended prematurely: osmo-stp_10.42.42.5(pid=16095) [trial-2375↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16095)] [trial-2375↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 13:54:37.237490 tst iperf3m4.py:8: Test FAILED (10.3 sec) 13:54:37.296254 run osmo-hlr_10.42.42.2(pid=16092): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16092)] 13:54:37.344203 run osmo-hlr_10.42.42.2(pid=16092): stdout: | (launched: 2022-12-10_13:54:34.104734) 13:54:37.392671 run osmo-hlr_10.42.42.2(pid=16092): stderr: | �[0;m�[1;31m20221210135434301 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210135434301 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210135434301 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210135434301 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210135434301 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210135434302 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210135434314 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210135434322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210135434323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210135434323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:54:37.433928 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16081): Terminating (SIGTERM) 13:54:37.472822 run iperf3-srv_10.42.42.10(pid=16082): Terminating (SIGTERM) 13:54:37.511742 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16083): Terminating (SIGTERM) 13:54:37.550632 run iperf3-srv_10.42.42.10(pid=16084): Terminating (SIGTERM) 13:54:37.589486 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16085): Terminating (SIGTERM) 13:54:37.628256 run iperf3-srv_10.42.42.10(pid=16086): Terminating (SIGTERM) 13:54:37.667140 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16087): Terminating (SIGTERM) 13:54:37.705947 run iperf3-srv_10.42.42.10(pid=16088): Terminating (SIGTERM) 13:54:37.744851 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16091): Terminating (SIGTERM) 13:54:37.783653 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16094): Terminating (SIGTERM) 13:54:37.822800 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16097): Terminating (SIGTERM) 13:54:37.831958 --- ParallelTerminationStrategy: PID 16081 died... 13:54:37.884137 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16081): Terminated: ok {rc=0} 13:54:37.893813 --- ParallelTerminationStrategy: PID 16082 died... 13:54:37.945326 run iperf3-srv_10.42.42.10(pid=16082): Terminated {rc=256} 13:54:37.954922 --- ParallelTerminationStrategy: PID 16083 died... 13:54:38.006983 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16083): Terminated: ok {rc=0} 13:54:38.016500 --- ParallelTerminationStrategy: PID 16084 died... 13:54:38.068638 run iperf3-srv_10.42.42.10(pid=16084): Terminated {rc=256} 13:54:38.078227 --- ParallelTerminationStrategy: PID 16085 died... 13:54:38.129821 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16085): Terminated: ok {rc=0} 13:54:38.139217 --- ParallelTerminationStrategy: PID 16086 died... 13:54:38.190734 run iperf3-srv_10.42.42.10(pid=16086): Terminated {rc=256} 13:54:38.200094 --- ParallelTerminationStrategy: PID 16087 died... 13:54:38.252569 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16087): Terminated: ok {rc=0} 13:54:38.261931 --- ParallelTerminationStrategy: PID 16088 died... 13:54:38.313442 run iperf3-srv_10.42.42.10(pid=16088): Terminated {rc=256} 13:54:38.322728 --- ParallelTerminationStrategy: PID 16091 died... 13:54:38.374562 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16091): Terminated: ok {rc=0} 13:54:38.383967 --- ParallelTerminationStrategy: PID 16094 died... 13:54:38.435800 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16094): Terminated: ok {rc=0} 13:54:38.445321 --- ParallelTerminationStrategy: PID 16097 died... 13:54:38.497131 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16097): Terminated: ok {rc=0} 13:54:38.584504 bus /gobi_4: Setting Powered False 13:54:39.686128 bus /gobi_4: Setting Powered False 13:54:40.795771 bus /gobi_1: Setting Powered False 13:54:41.896023 bus /gobi_1: Setting Powered False 13:54:43.005741 bus /gobi_0: Setting Powered False 13:54:44.110121 bus /gobi_0: Setting Powered False 13:54:45.221053 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16095): Process ended prematurely: osmo-stp_10.42.42.5(pid=16095) [trial-2375↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16095)]