Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=9612): Process ended prematurely: osmo-stp_10.42.42.5(pid=9612) [trial-2375↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9612)]
Standard Output
---------------------------------------------- trial-2375 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 12:49:56.008661 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:49:56.020134 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 12:49:56.176744 tst cs_paging_gprs_active.py: using LAC 28509 12:49:56.310571 tst cs_paging_gprs_active.py: using RAC 204 12:49:56.442348 tst cs_paging_gprs_active.py: using CellId 28509 12:49:56.568088 tst cs_paging_gprs_active.py: using BVCI 28510 12:49:56.592734 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:49:56.603647 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:49:56.614389 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:49:56.625866 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:49:56.637259 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:49:56.648549 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:49:56.660047 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:49:56.671272 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:49:56.682919 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 12:49:56.807651 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 12:49:57.114198 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:49:57.255465 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:49:57.607632 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9599): Launched 12:49:57.901344 run iperf3-srv_10.42.42.10(pid=9600): Launched 12:49:58.108493 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:49:58.250318 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:49:58.603680 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9601): Launched 12:49:58.896999 run iperf3-srv_10.42.42.10(pid=9602): Launched 12:49:59.104059 tst cs_paging_gprs_active.py:38: start network... 12:49:59.245620 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:49:59.792176 run create_hlr_db(pid=9603): Launched 12:49:59.987793 bus /gobi_6: Setting Powered False 12:50:01.018270 run create_hlr_db(pid=9603): Terminated: ok {rc=0} 12:50:01.465611 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9605): Launched 12:50:01.834855 run osmo-hlr_10.42.42.2(pid=9606): Launched 12:50:02.052056 run osmo-stp_10.42.42.5: Starting osmo-stp 12:50:02.698440 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9611): Launched 12:50:03.040607 run osmo-stp_10.42.42.5(pid=9612): Launched 12:50:03.163784 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:50:03.756939 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9614): Launched 12:50:03.878398 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:50:04.177053 run patchelf(pid=9615): Launched 12:50:04.374208 run osmo-stp_10.42.42.5(pid=9612): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9612)] 12:50:04.518394 run osmo-stp_10.42.42.5(pid=9612): stdout: | (launched: 2022-12-10_12:50:02.870830) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:50:04.662338 run osmo-stp_10.42.42.5(pid=9612): stderr: | �[0;m�[38;5;43m20221210125003064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125003065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125003065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125003065 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125003068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125003068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125003068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:50:04.802073 run osmo-stp_10.42.42.5(pid=9612): stdout: | (launched: 2022-12-10_12:50:02.870830) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:50:04.940247 run osmo-stp_10.42.42.5(pid=9612): stderr: | �[0;m�[38;5;43m20221210125003064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210125003065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210125003065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210125003065 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210125003068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210125003068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210125003068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:50:05.101844 run patchelf(pid=9615): Terminating (SIGINT) 12:50:05.291080 run patchelf(pid=9615): Terminated: ok {rc=0} 12:50:05.325860 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9612): Process ended prematurely: osmo-stp_10.42.42.5(pid=9612) [trial-2375↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9612)] [trial-2375↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 12:50:05.335724 tst cs_paging_gprs_active.py:38: Test FAILED (9.4 sec) 12:50:05.399871 run osmo-hlr_10.42.42.2(pid=9606): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9606)] 12:50:05.452275 run osmo-hlr_10.42.42.2(pid=9606): stdout: | (launched: 2022-12-10_12:50:01.643119) 12:50:05.506108 run osmo-hlr_10.42.42.2(pid=9606): stderr: | �[0;m�[1;31m20221210125001962 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210125001962 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210125001962 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210125001962 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210125001962 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210125001962 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210125001980 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210125002004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210125002007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210125002008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:50:05.551182 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9599): Terminating (SIGTERM) 12:50:05.593987 run iperf3-srv_10.42.42.10(pid=9600): Terminating (SIGTERM) 12:50:05.636876 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9601): Terminating (SIGTERM) 12:50:05.679644 run iperf3-srv_10.42.42.10(pid=9602): Terminating (SIGTERM) 12:50:05.722286 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9605): Terminating (SIGTERM) 12:50:05.765071 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9611): Terminating (SIGTERM) 12:50:05.807846 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9614): Terminating (SIGTERM) 12:50:05.817834 --- ParallelTerminationStrategy: PID 9599 died... 12:50:05.874966 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9599): Terminated: ok {rc=0} 12:50:05.885361 --- ParallelTerminationStrategy: PID 9600 died... 12:50:05.942029 run iperf3-srv_10.42.42.10(pid=9600): Terminated {rc=256} 12:50:05.952354 --- ParallelTerminationStrategy: PID 9601 died... 12:50:06.009010 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9601): Terminated: ok {rc=0} 12:50:06.019063 --- ParallelTerminationStrategy: PID 9602 died... 12:50:06.075567 run iperf3-srv_10.42.42.10(pid=9602): Terminated {rc=256} 12:50:06.085905 --- ParallelTerminationStrategy: PID 9605 died... 12:50:06.142658 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9605): Terminated: ok {rc=0} 12:50:06.152940 --- ParallelTerminationStrategy: PID 9611 died... 12:50:06.209526 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9611): Terminated: ok {rc=0} 12:50:06.220004 --- ParallelTerminationStrategy: PID 9614 died... 12:50:06.276650 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9614): Terminated: ok {rc=0} 12:50:06.364823 bus /gobi_0: Setting Powered False 12:50:07.473129 bus /gobi_0: Setting Powered False 12:50:08.586440 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9612): Process ended prematurely: osmo-stp_10.42.42.5(pid=9612) [trial-2375↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9612)]