Failed
gprs:sysmo.ping_idle_ping.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9524): Process ended prematurely: osmo-stp_10.42.42.5(pid=9524) [trial-2375↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9524)]
Standard Output
---------------------------------------------- trial-2375 gprs:sysmo ping_idle_ping.py ---------------------------------------------- 12:48:44.909234 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 12:48:44.920464 tst gprs:sysmo: Using 1 x bts (candidates: 1) 12:48:45.053064 tst ping_idle_ping.py: using LAC 28503 12:48:45.176080 tst ping_idle_ping.py: using RAC 198 12:48:45.299721 tst ping_idle_ping.py: using CellId 28503 12:48:45.423049 tst ping_idle_ping.py: using BVCI 28504 12:48:45.447357 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 12:48:45.458214 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 12:48:45.468788 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 12:48:45.479689 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 12:48:45.490613 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 12:48:45.501350 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 12:48:45.512243 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 12:48:45.523203 tst gprs:sysmo: Using 1 x modem (candidates: 4) 12:48:45.816236 tst ping_idle_ping.py:24: start network... 12:48:45.964737 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:48:46.507417 run create_hlr_db(pid=9518): Launched 12:48:46.691866 bus /gobi_6: Setting Powered False 12:48:47.709854 run create_hlr_db(pid=9518): Terminated: ok {rc=0} 12:48:48.151693 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9520): Launched 12:48:48.487253 run osmo-hlr_10.42.42.2(pid=9521): Launched 12:48:48.609164 run osmo-stp_10.42.42.5: Starting osmo-stp 12:48:49.189428 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9523): Launched 12:48:49.523681 run osmo-stp_10.42.42.5(pid=9524): Launched 12:48:49.644213 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:48:50.226806 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9526): Launched 12:48:50.345596 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:48:50.637009 run patchelf(pid=9527): Launched 12:48:50.831152 run osmo-stp_10.42.42.5(pid=9524): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9524)] 12:48:50.973065 run osmo-stp_10.42.42.5(pid=9524): stdout: | (launched: 2022-12-10_12:48:49.358328) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:48:51.114707 run osmo-stp_10.42.42.5(pid=9524): stderr: | �[0;m�[38;5;43m20221210124849553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210124849553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210124849553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210124849554 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210124849554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210124849554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210124849554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:48:51.254281 run osmo-stp_10.42.42.5(pid=9524): stdout: | (launched: 2022-12-10_12:48:49.358328) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:48:51.390516 run osmo-stp_10.42.42.5(pid=9524): stderr: | �[0;m�[38;5;43m20221210124849553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210124849553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210124849553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210124849554 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210124849554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210124849554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210124849554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:48:51.549741 run patchelf(pid=9527): Terminating (SIGINT) 12:48:51.735692 run patchelf(pid=9527): Terminated: ok {rc=0} 12:48:51.769355 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=9524): Process ended prematurely: osmo-stp_10.42.42.5(pid=9524) [trial-2375↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9524)] [trial-2375↪gprs:sysmo↪ping_idle_ping.py:27] 12:48:51.778595 tst ping_idle_ping.py:27: Test FAILED (6.9 sec) 12:48:51.841412 run osmo-hlr_10.42.42.2(pid=9521): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:sysmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9521)] 12:48:51.893165 run osmo-hlr_10.42.42.2(pid=9521): stdout: | (launched: 2022-12-10_12:48:48.320334) 12:48:51.945236 run osmo-hlr_10.42.42.2(pid=9521): stderr: | �[0;m�[1;31m20221210124848524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210124848524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210124848524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210124848524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210124848524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210124848524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210124848567 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:sysmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210124848577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210124848578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210124848578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:48:51.989678 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9520): Terminating (SIGTERM) 12:48:52.031637 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9523): Terminating (SIGTERM) 12:48:52.073679 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9526): Terminating (SIGTERM) 12:48:52.083412 --- ParallelTerminationStrategy: PID 9520 died... 12:48:52.139568 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9520): Terminated: ok {rc=0} 12:48:52.149817 --- ParallelTerminationStrategy: PID 9523 died... 12:48:52.205947 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9523): Terminated: ok {rc=0} 12:48:52.216171 --- ParallelTerminationStrategy: PID 9526 died... 12:48:52.272736 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9526): Terminated: ok {rc=0} 12:48:52.360808 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9524): Process ended prematurely: osmo-stp_10.42.42.5(pid=9524) [trial-2375↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9524)]