Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11529): Process ended prematurely: osmo-stp_10.42.42.5(pid=11529) [trial-2375↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11529)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:05:21.940769 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:05:21.951387 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:05:22.089299 tst cs_paging_gprs_active.py: using LAC 28592 13:05:22.216022 tst cs_paging_gprs_active.py: using RAC 32 13:05:22.337820 tst cs_paging_gprs_active.py: using CellId 28592 13:05:22.459356 tst cs_paging_gprs_active.py: using BVCI 28593 13:05:22.482501 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:05:22.493277 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:05:22.503867 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:05:22.514638 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:05:22.525229 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:05:22.535741 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:05:22.546558 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:05:22.557135 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:05:22.567804 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:05:22.686918 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:05:22.976456 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:05:23.110029 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:05:23.439886 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11519): Launched 13:05:23.714514 run iperf3-srv_10.42.42.10(pid=11520): Launched 13:05:23.911096 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:05:24.045243 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:05:24.375392 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11521): Launched 13:05:24.649783 run iperf3-srv_10.42.42.10(pid=11522): Launched 13:05:24.845930 tst cs_paging_gprs_active.py:38: start network... 13:05:24.980161 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:05:25.492195 run create_hlr_db(pid=11523): Launched 13:05:25.677177 bus /gobi_6: Setting Powered False 13:05:26.698521 run create_hlr_db(pid=11523): Terminated: ok {rc=0} 13:05:27.101568 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11525): Launched 13:05:27.411382 run osmo-hlr_10.42.42.2(pid=11526): Launched 13:05:27.533893 run osmo-stp_10.42.42.5: Starting osmo-stp 13:05:28.091114 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11528): Launched 13:05:28.412737 run osmo-stp_10.42.42.5(pid=11529): Launched 13:05:28.530166 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:05:29.090830 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11531): Launched 13:05:29.206003 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:05:29.484461 run patchelf(pid=11532): Launched 13:05:29.671642 run osmo-stp_10.42.42.5(pid=11529): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11529)] 13:05:29.808587 run osmo-stp_10.42.42.5(pid=11529): stdout: | (launched: 2022-12-10_13:05:28.254654) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:05:29.946214 run osmo-stp_10.42.42.5(pid=11529): stderr: | �[0;m�[38;5;43m20221210130528448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130528448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130528448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130528449 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130528449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130528449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130528449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:05:30.078971 run osmo-stp_10.42.42.5(pid=11529): stdout: | (launched: 2022-12-10_13:05:28.254654) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:05:30.210583 run osmo-stp_10.42.42.5(pid=11529): stderr: | �[0;m�[38;5;43m20221210130528448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210130528448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210130528448 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210130528449 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210130528449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210130528449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210130528449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:05:30.363542 run patchelf(pid=11532): Terminating (SIGINT) 13:05:30.543172 run patchelf(pid=11532): Terminated: ok {rc=0} 13:05:30.576342 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11529): Process ended prematurely: osmo-stp_10.42.42.5(pid=11529) [trial-2375↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11529)] [trial-2375↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:05:30.586064 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 13:05:30.648742 run osmo-hlr_10.42.42.2(pid=11526): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11526)] 13:05:30.699995 run osmo-hlr_10.42.42.2(pid=11526): stdout: | (launched: 2022-12-10_13:05:27.254615) 13:05:30.751613 run osmo-hlr_10.42.42.2(pid=11526): stderr: | �[0;m�[1;31m20221210130527447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210130527447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210130527447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210130527447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210130527447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210130527447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210130527460 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210130527468 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210130527468 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210130527469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:05:30.795823 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11519): Terminating (SIGTERM) 13:05:30.844482 run iperf3-srv_10.42.42.10(pid=11520): Terminating (SIGTERM) 13:05:30.894983 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11521): Terminating (SIGTERM) 13:05:30.938365 run iperf3-srv_10.42.42.10(pid=11522): Terminating (SIGTERM) 13:05:30.980536 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11525): Terminating (SIGTERM) 13:05:31.023000 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11528): Terminating (SIGTERM) 13:05:31.065148 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11531): Terminating (SIGTERM) 13:05:31.074733 --- ParallelTerminationStrategy: PID 11519 died... 13:05:31.131517 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11519): Terminated: ok {rc=0} 13:05:31.141987 --- ParallelTerminationStrategy: PID 11520 died... 13:05:31.198193 run iperf3-srv_10.42.42.10(pid=11520): Terminated {rc=256} 13:05:31.208529 --- ParallelTerminationStrategy: PID 11521 died... 13:05:31.264880 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11521): Terminated: ok {rc=0} 13:05:31.275339 --- ParallelTerminationStrategy: PID 11522 died... 13:05:31.331810 run iperf3-srv_10.42.42.10(pid=11522): Terminated {rc=256} 13:05:31.342429 --- ParallelTerminationStrategy: PID 11525 died... 13:05:31.399241 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11525): Terminated: ok {rc=0} 13:05:31.409967 --- ParallelTerminationStrategy: PID 11528 died... 13:05:31.466952 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11528): Terminated: ok {rc=0} 13:05:31.477767 --- ParallelTerminationStrategy: PID 11531 died... 13:05:31.533978 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11531): Terminated: ok {rc=0} 13:05:31.622535 bus /gobi_0: Setting Powered False 13:05:32.724712 bus /gobi_0: Setting Powered False 13:05:33.834540 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11529): Process ended prematurely: osmo-stp_10.42.42.5(pid=11529) [trial-2375↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11529)]