Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=13823): Process ended prematurely: osmo-stp_10.42.42.5(pid=13823) [trial-2375↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13823)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 13:30:06.676429 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:30:06.687398 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 13:30:06.830166 tst cs_paging_gprs_active.py: using LAC 28725 13:30:06.956543 tst cs_paging_gprs_active.py: using RAC 165 13:30:07.080436 tst cs_paging_gprs_active.py: using CellId 28725 13:30:07.203885 tst cs_paging_gprs_active.py: using BVCI 28726 13:30:07.228211 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:30:07.239110 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:30:07.249699 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:30:07.260305 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:30:07.271034 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:30:07.281817 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:30:07.292743 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:30:07.303625 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:30:07.314852 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 13:30:07.433169 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 13:30:07.710167 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:30:07.835158 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:30:08.143361 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13813): Launched 13:30:08.401024 run iperf3-srv_10.42.42.10(pid=13814): Launched 13:30:08.584378 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:30:08.709550 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:30:09.019081 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13815): Launched 13:30:09.275951 run iperf3-srv_10.42.42.10(pid=13816): Launched 13:30:09.459162 tst cs_paging_gprs_active.py:38: start network... 13:30:09.584502 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:30:10.057092 run create_hlr_db(pid=13817): Launched 13:30:10.228576 bus /sierra_2: Setting Powered False 13:30:11.250076 run create_hlr_db(pid=13817): Terminated: ok {rc=0} 13:30:11.672574 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13819): Launched 13:30:11.991122 run osmo-hlr_10.42.42.2(pid=13820): Launched 13:30:12.111560 run osmo-stp_10.42.42.5: Starting osmo-stp 13:30:12.665332 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13822): Launched 13:30:12.984271 run osmo-stp_10.42.42.5(pid=13823): Launched 13:30:13.100518 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:30:13.655982 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13825): Launched 13:30:13.770150 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:30:14.046961 run patchelf(pid=13826): Launched 13:30:14.233435 run osmo-stp_10.42.42.5(pid=13823): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13823)] 13:30:14.369480 run osmo-stp_10.42.42.5(pid=13823): stdout: | (launched: 2022-12-10_13:30:12.828166) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:30:14.505476 run osmo-stp_10.42.42.5(pid=13823): stderr: | �[0;m�[38;5;43m20221210133013021 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210133013021 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210133013021 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210133013021 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210133013022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210133013022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210133013022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:30:14.637600 run osmo-stp_10.42.42.5(pid=13823): stdout: | (launched: 2022-12-10_13:30:12.828166) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:30:14.769226 run osmo-stp_10.42.42.5(pid=13823): stderr: | �[0;m�[38;5;43m20221210133013021 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210133013021 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210133013021 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210133013021 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210133013022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210133013022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210133013022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:30:14.921396 run patchelf(pid=13826): Terminating (SIGINT) 13:30:15.100059 run patchelf(pid=13826): Terminated: ok {rc=0} 13:30:15.132909 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13823): Process ended prematurely: osmo-stp_10.42.42.5(pid=13823) [trial-2375↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13823)] [trial-2375↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 13:30:15.142763 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 13:30:15.204882 run osmo-hlr_10.42.42.2(pid=13820): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13820)] 13:30:15.255714 run osmo-hlr_10.42.42.2(pid=13820): stdout: | (launched: 2022-12-10_13:30:11.834714) 13:30:15.307152 run osmo-hlr_10.42.42.2(pid=13820): stderr: | �[0;m�[1;31m20221210133012033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210133012033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210133012033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210133012033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210133012033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210133012033 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210133012045 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210133012054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210133012054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210133012054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:30:15.350689 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13813): Terminating (SIGTERM) 13:30:15.391675 run iperf3-srv_10.42.42.10(pid=13814): Terminating (SIGTERM) 13:30:15.433146 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13815): Terminating (SIGTERM) 13:30:15.474457 run iperf3-srv_10.42.42.10(pid=13816): Terminating (SIGTERM) 13:30:15.515457 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13819): Terminating (SIGTERM) 13:30:15.556673 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13822): Terminating (SIGTERM) 13:30:15.597969 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13825): Terminating (SIGTERM) 13:30:15.607566 --- ParallelTerminationStrategy: PID 13813 died... 13:30:15.663075 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13813): Terminated: ok {rc=0} 13:30:15.673156 --- ParallelTerminationStrategy: PID 13814 died... 13:30:15.728540 run iperf3-srv_10.42.42.10(pid=13814): Terminated {rc=256} 13:30:15.738561 --- ParallelTerminationStrategy: PID 13815 died... 13:30:15.793600 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13815): Terminated: ok {rc=0} 13:30:15.803551 --- ParallelTerminationStrategy: PID 13816 died... 13:30:15.859575 run iperf3-srv_10.42.42.10(pid=13816): Terminated {rc=256} 13:30:15.870021 --- ParallelTerminationStrategy: PID 13819 died... 13:30:15.939742 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13819): Terminated: ok {rc=0} 13:30:15.950149 --- ParallelTerminationStrategy: PID 13822 died... 13:30:16.005815 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13822): Terminated: ok {rc=0} 13:30:16.016353 --- ParallelTerminationStrategy: PID 13825 died... 13:30:16.073097 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13825): Terminated: ok {rc=0} 13:30:16.161586 bus /gobi_0: Setting Powered False 13:30:17.262107 bus /gobi_0: Setting Powered False 13:30:18.371390 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13823): Process ended prematurely: osmo-stp_10.42.42.5(pid=13823) [trial-2375↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13823)]