Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=13337): Process ended prematurely: osmo-stp_10.42.42.5(pid=13337) [trial-2375↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13337)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 13:23:16.308051 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:23:16.322758 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:23:16.494911 tst cs_paging_gprs_active.py: using LAC 28688 13:23:16.646815 tst cs_paging_gprs_active.py: using RAC 128 13:23:16.810814 tst cs_paging_gprs_active.py: using CellId 28688 13:23:16.995376 tst cs_paging_gprs_active.py: using BVCI 28689 13:23:17.032326 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:23:17.049557 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:23:17.067162 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:23:17.083090 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:23:17.099460 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:23:17.114873 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:23:17.130766 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:23:17.145726 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:23:17.160602 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:23:17.314089 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:23:17.667490 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:23:17.831612 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:23:18.230951 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13129): Launched 13:23:18.578284 run iperf3-srv_10.42.42.10(pid=13165): Launched 13:23:18.803707 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:23:18.961895 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:23:19.375744 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13261): Launched 13:23:19.736235 run iperf3-srv_10.42.42.10(pid=13311): Launched 13:23:19.952143 tst cs_paging_gprs_active.py:38: start network... 13:23:20.082372 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:23:20.625556 run create_hlr_db(pid=13329): Launched 13:23:20.816160 bus /gobi_6: Setting Powered False 13:23:21.830342 run create_hlr_db(pid=13329): Terminated: ok {rc=0} 13:23:22.260372 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13333): Launched 13:23:22.682715 run osmo-hlr_10.42.42.2(pid=13334): Launched 13:23:22.922416 run osmo-stp_10.42.42.5: Starting osmo-stp 13:23:23.515515 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13336): Launched 13:23:23.950482 run osmo-stp_10.42.42.5(pid=13337): Launched 13:23:24.171519 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:23:24.765611 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13339): Launched 13:23:24.883936 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:23:25.201367 run patchelf(pid=13340): Launched 13:23:25.397300 run osmo-stp_10.42.42.5(pid=13337): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13337)] 13:23:25.540003 run osmo-stp_10.42.42.5(pid=13337): stdout: | (launched: 2022-12-10_13:23:23.684349) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:23:25.682702 run osmo-stp_10.42.42.5(pid=13337): stderr: | �[0;m�[38;5;43m20221210132323982 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210132323982 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210132323983 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210132323983 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210132323983 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210132323983 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210132323984 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:23:25.821622 run osmo-stp_10.42.42.5(pid=13337): stdout: | (launched: 2022-12-10_13:23:23.684349) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:23:25.958771 run osmo-stp_10.42.42.5(pid=13337): stderr: | �[0;m�[38;5;43m20221210132323982 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210132323982 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210132323983 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210132323983 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210132323983 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210132323983 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210132323984 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:23:26.117074 run patchelf(pid=13340): Terminating (SIGINT) 13:23:26.307131 run patchelf(pid=13340): Terminated: ok {rc=0} 13:23:26.342992 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13337): Process ended prematurely: osmo-stp_10.42.42.5(pid=13337) [trial-2375↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13337)] [trial-2375↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 13:23:26.354320 tst cs_paging_gprs_active.py:38: Test FAILED (10.1 sec) 13:23:26.419566 run osmo-hlr_10.42.42.2(pid=13334): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13334)] 13:23:26.472789 run osmo-hlr_10.42.42.2(pid=13334): stdout: | (launched: 2022-12-10_13:23:22.416844) 13:23:26.526231 run osmo-hlr_10.42.42.2(pid=13334): stderr: | �[0;m�[1;31m20221210132322720 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210132322720 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210132322720 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210132322720 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210132322720 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210132322720 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210132322739 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210132322747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210132322747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210132322747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:23:26.572575 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13129): Terminating (SIGTERM) 13:23:26.617399 run iperf3-srv_10.42.42.10(pid=13165): Terminating (SIGTERM) 13:23:26.660057 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13261): Terminating (SIGTERM) 13:23:26.705908 run iperf3-srv_10.42.42.10(pid=13311): Terminating (SIGTERM) 13:23:26.751444 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13333): Terminating (SIGTERM) 13:23:26.796151 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13336): Terminating (SIGTERM) 13:23:26.840782 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13339): Terminating (SIGTERM) 13:23:26.851326 --- ParallelTerminationStrategy: PID 13129 died... 13:23:26.909444 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13129): Terminated: ok {rc=0} 13:23:26.920324 --- ParallelTerminationStrategy: PID 13165 died... 13:23:26.977558 run iperf3-srv_10.42.42.10(pid=13165): Terminated {rc=256} 13:23:26.988660 --- ParallelTerminationStrategy: PID 13261 died... 13:23:27.045801 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13261): Terminated: ok {rc=0} 13:23:27.056657 --- ParallelTerminationStrategy: PID 13311 died... 13:23:27.113727 run iperf3-srv_10.42.42.10(pid=13311): Terminated {rc=256} 13:23:27.124622 --- ParallelTerminationStrategy: PID 13333 died... 13:23:27.184308 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13333): Terminated: ok {rc=0} 13:23:27.195281 --- ParallelTerminationStrategy: PID 13336 died... 13:23:27.252567 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13336): Terminated: ok {rc=0} 13:23:27.263565 --- ParallelTerminationStrategy: PID 13339 died... 13:23:27.320730 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13339): Terminated: ok {rc=0} 13:23:27.411804 bus /gobi_0: Setting Powered False 13:23:28.520365 bus /gobi_0: Setting Powered False 13:23:29.631995 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13337): Process ended prematurely: osmo-stp_10.42.42.5(pid=13337) [trial-2375↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13337)]