Failed
dynts:trx-b200+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-b200+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=29226): Process ended prematurely: osmo-stp_10.42.42.5(pid=29226) [trial-2387↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29226)]
Standard Output
---------------------------------------------- trial-2387 dynts:trx-b200+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 09:00:19.417518 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 09:00:19.430054 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 09:00:19.593557 tst switch_tch_pdch.py: using LAC 32876 09:00:19.715566 tst switch_tch_pdch.py: using RAC 236 09:00:19.834183 tst switch_tch_pdch.py: using CellId 32876 09:00:19.948376 tst switch_tch_pdch.py: using BVCI 32877 09:00:19.970823 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 09:00:19.981877 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 09:00:19.992690 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 09:00:20.003620 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 09:00:20.014929 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 09:00:20.026142 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 09:00:20.037454 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 09:00:20.048476 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 09:00:20.167320 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 09:00:20.437383 tst switch_tch_pdch.py:51: start network... 09:00:20.558683 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:00:20.991473 run create_hlr_db(pid=29220): Launched 09:00:21.110817 bus /gobi_6: Setting Powered False 09:00:22.180879 run create_hlr_db(pid=29220): Terminated: ok {rc=0} 09:00:22.544017 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29222): Launched 09:00:22.835191 run osmo-hlr_10.42.42.2(pid=29223): Launched 09:00:22.948542 run osmo-stp_10.42.42.5: Starting osmo-stp 09:00:23.439022 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29225): Launched 09:00:23.730728 run osmo-stp_10.42.42.5(pid=29226): Launched 09:00:23.837466 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:00:24.320459 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29228): Launched 09:00:24.424433 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:00:24.677701 run patchelf(pid=29229): Launched 09:00:24.848574 run osmo-stp_10.42.42.5(pid=29226): ERR: Terminated: ERROR {rc=1} [trial-2387↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29226)] 09:00:24.973670 run osmo-stp_10.42.42.5(pid=29226): stdout: | (launched: 2022-12-13_09:00:23.586853) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:00:25.099142 run osmo-stp_10.42.42.5(pid=29226): stderr: | �[0;m�[38;5;43m20221213090023754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213090023754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213090023754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213090023754 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213090023757 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213090023757 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213090023757 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:00:25.219971 run osmo-stp_10.42.42.5(pid=29226): stdout: | (launched: 2022-12-13_09:00:23.586853) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:00:25.340696 run osmo-stp_10.42.42.5(pid=29226): stderr: | �[0;m�[38;5;43m20221213090023754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213090023754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213090023754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213090023754 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213090023757 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213090023757 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213090023757 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:00:25.480237 run patchelf(pid=29229): Terminating (SIGINT) 09:00:25.643934 run patchelf(pid=29229): Terminated: ok {rc=0} 09:00:25.673882 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=29226): Process ended prematurely: osmo-stp_10.42.42.5(pid=29226) [trial-2387↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29226)] [trial-2387↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 09:00:25.682484 tst switch_tch_pdch.py:54: Test FAILED (6.3 sec) 09:00:25.742691 run osmo-hlr_10.42.42.2(pid=29223): ERR: Terminated: ERROR {rc=237} [trial-2387↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29223)] 09:00:25.791763 run osmo-hlr_10.42.42.2(pid=29223): stdout: | (launched: 2022-12-13_09:00:22.691519) 09:00:25.841628 run osmo-hlr_10.42.42.2(pid=29223): stderr: | �[0;m�[1;31m20221213090022865 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213090022865 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213090022865 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213090022865 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213090022865 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213090022865 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213090022876 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/dynts:trx-b200+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213090022885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213090022885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213090022885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:00:25.883754 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29222): Terminating (SIGTERM) 09:00:25.923585 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29225): Terminating (SIGTERM) 09:00:25.963368 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29228): Terminating (SIGTERM) 09:00:25.972606 --- ParallelTerminationStrategy: PID 29222 died... 09:00:26.026178 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29222): Terminated: ok {rc=0} 09:00:26.035614 --- ParallelTerminationStrategy: PID 29225 died... 09:00:26.088590 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29225): Terminated: ok {rc=0} 09:00:26.098186 --- ParallelTerminationStrategy: PID 29228 died... 09:00:26.151297 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29228): Terminated: ok {rc=0} 09:00:26.233715 bus /gobi_0: Setting Powered False 09:00:27.334885 bus /gobi_0: Setting Powered False 09:00:28.444837 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29226): Process ended prematurely: osmo-stp_10.42.42.5(pid=29226) [trial-2387↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29226)]