Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=1370): Process ended prematurely: osmo-stp_10.42.42.5(pid=1370) [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1370)]
Standard Output
---------------------------------------------- trial-2387 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 09:44:51.371390 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:44:51.383110 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 09:44:51.524132 tst cs_paging_gprs_active.py: using LAC 33116 09:44:51.648250 tst cs_paging_gprs_active.py: using RAC 221 09:44:51.773869 tst cs_paging_gprs_active.py: using CellId 33116 09:44:51.899640 tst cs_paging_gprs_active.py: using BVCI 33117 09:44:51.923879 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:44:51.935675 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:44:51.947204 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:44:51.958821 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:44:51.970413 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:44:51.981951 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:44:51.993659 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:44:52.005225 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:44:52.017016 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:44:52.135356 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:44:52.423461 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:44:52.555753 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:44:52.881727 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1360): Launched 09:44:53.152111 run iperf3-srv_10.42.42.10(pid=1361): Launched 09:44:53.346029 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:44:53.477649 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:44:53.803604 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1362): Launched 09:44:54.074662 run iperf3-srv_10.42.42.10(pid=1363): Launched 09:44:54.267580 tst cs_paging_gprs_active.py:38: start network... 09:44:54.399113 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:44:54.906345 run create_hlr_db(pid=1364): Launched 09:44:55.089048 bus /gobi_6: Setting Powered False 09:44:56.110649 run create_hlr_db(pid=1364): Terminated: ok {rc=0} 09:44:56.530827 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1366): Launched 09:44:56.846671 run osmo-hlr_10.42.42.2(pid=1367): Launched 09:44:56.962478 run osmo-stp_10.42.42.5: Starting osmo-stp 09:44:57.509729 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1369): Launched 09:44:57.826251 run osmo-stp_10.42.42.5(pid=1370): Launched 09:44:57.941157 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:44:58.493947 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1372): Launched 09:44:58.607067 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:44:58.882676 run patchelf(pid=1373): Launched 09:44:59.067823 run osmo-stp_10.42.42.5(pid=1370): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1370)] 09:44:59.203145 run osmo-stp_10.42.42.5(pid=1370): stdout: | (launched: 2022-12-13_09:44:57.670892) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:44:59.339225 run osmo-stp_10.42.42.5(pid=1370): stderr: | �[0;m�[38;5;43m20221213094457864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213094457864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213094457864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213094457865 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213094457865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213094457865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213094457865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:44:59.470302 run osmo-stp_10.42.42.5(pid=1370): stdout: | (launched: 2022-12-13_09:44:57.670892) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:44:59.599816 run osmo-stp_10.42.42.5(pid=1370): stderr: | �[0;m�[38;5;43m20221213094457864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213094457864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213094457864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213094457865 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213094457865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213094457865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213094457865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:44:59.751043 run patchelf(pid=1373): Terminating (SIGINT) 09:44:59.929066 run patchelf(pid=1373): Terminated: ok {rc=0} 09:44:59.961668 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1370): Process ended prematurely: osmo-stp_10.42.42.5(pid=1370) [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1370)] [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 09:44:59.971468 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 09:45:00.033296 run osmo-hlr_10.42.42.2(pid=1367): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1367)] 09:45:00.084120 run osmo-hlr_10.42.42.2(pid=1367): stdout: | (launched: 2022-12-13_09:44:56.691816) 09:45:00.135587 run osmo-hlr_10.42.42.2(pid=1367): stderr: | �[0;m�[1;31m20221213094456890 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213094456890 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213094456890 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213094456890 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213094456890 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213094456890 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213094456904 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213094456914 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213094456914 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213094456914 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:45:00.179449 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1360): Terminating (SIGTERM) 09:45:00.220887 run iperf3-srv_10.42.42.10(pid=1361): Terminating (SIGTERM) 09:45:00.262611 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1362): Terminating (SIGTERM) 09:45:00.303865 run iperf3-srv_10.42.42.10(pid=1363): Terminating (SIGTERM) 09:45:00.345529 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1366): Terminating (SIGTERM) 09:45:00.386742 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1369): Terminating (SIGTERM) 09:45:00.428021 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1372): Terminating (SIGTERM) 09:45:00.437575 --- ParallelTerminationStrategy: PID 1360 died... 09:45:00.493058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1360): Terminated: ok {rc=0} 09:45:00.502928 --- ParallelTerminationStrategy: PID 1361 died... 09:45:00.557643 run iperf3-srv_10.42.42.10(pid=1361): Terminated {rc=256} 09:45:00.567375 --- ParallelTerminationStrategy: PID 1362 died... 09:45:00.622109 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1362): Terminated: ok {rc=0} 09:45:00.631888 --- ParallelTerminationStrategy: PID 1363 died... 09:45:00.686288 run iperf3-srv_10.42.42.10(pid=1363): Terminated {rc=256} 09:45:00.696124 --- ParallelTerminationStrategy: PID 1366 died... 09:45:00.750612 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1366): Terminated: ok {rc=0} 09:45:00.760288 --- ParallelTerminationStrategy: PID 1369 died... 09:45:00.814649 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1369): Terminated: ok {rc=0} 09:45:00.824334 --- ParallelTerminationStrategy: PID 1372 died... 09:45:00.880864 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1372): Terminated: ok {rc=0} 09:45:00.980340 bus /gobi_0: Setting Powered False 09:45:02.105280 bus /gobi_0: Setting Powered False 09:45:03.219109 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1370): Process ended prematurely: osmo-stp_10.42.42.5(pid=1370) [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1370)]