Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=1153): Process ended prematurely: osmo-stp_10.42.42.5(pid=1153) [trial-2387↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1153)]
Standard Output
---------------------------------------------- trial-2387 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 09:41:52.551019 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 09:41:52.562108 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 09:41:52.713118 tst cs_paging_gprs_active.py: using LAC 33101 09:41:52.840549 tst cs_paging_gprs_active.py: using RAC 206 09:41:52.965914 tst cs_paging_gprs_active.py: using CellId 33101 09:41:53.093761 tst cs_paging_gprs_active.py: using BVCI 33102 09:41:53.118243 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 09:41:53.129342 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 09:41:53.140194 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 09:41:53.151112 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 09:41:53.162029 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 09:41:53.173330 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 09:41:53.184417 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 09:41:53.195365 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 09:41:53.206373 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 09:41:53.323509 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 09:41:53.618109 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:41:53.751404 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:41:54.081558 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1142): Launched 09:41:54.357270 run iperf3-srv_10.42.42.10(pid=1144): Launched 09:41:54.553045 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:41:54.686681 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:41:55.016580 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1145): Launched 09:41:55.291406 run iperf3-srv_10.42.42.10(pid=1146): Launched 09:41:55.487366 tst cs_paging_gprs_active.py:38: start network... 09:41:55.620937 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:41:56.131834 run create_hlr_db(pid=1147): Launched 09:41:56.316878 bus /sierra_2: Setting Powered False 09:41:57.339185 run create_hlr_db(pid=1147): Terminated: ok {rc=0} 09:41:57.762821 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1149): Launched 09:41:58.083610 run osmo-hlr_10.42.42.2(pid=1150): Launched 09:41:58.201184 run osmo-stp_10.42.42.5: Starting osmo-stp 09:41:58.755703 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1152): Launched 09:41:59.076874 run osmo-stp_10.42.42.5(pid=1153): Launched 09:41:59.193374 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:41:59.750833 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1155): Launched 09:41:59.865721 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:42:00.144007 run patchelf(pid=1156): Launched 09:42:00.331475 run osmo-stp_10.42.42.5(pid=1153): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1153)] 09:42:00.468205 run osmo-stp_10.42.42.5(pid=1153): stdout: | (launched: 2022-12-13_09:41:58.918682) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:42:00.605199 run osmo-stp_10.42.42.5(pid=1153): stderr: | �[0;m�[38;5;43m20221213094159110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213094159110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213094159110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213094159111 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213094159113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213094159113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213094159113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:42:00.737607 run osmo-stp_10.42.42.5(pid=1153): stdout: | (launched: 2022-12-13_09:41:58.918682) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:42:00.903051 run osmo-stp_10.42.42.5(pid=1153): stderr: | �[0;m�[38;5;43m20221213094159110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213094159110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213094159110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213094159111 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213094159113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213094159113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213094159113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:42:01.191054 run patchelf(pid=1156): Terminating (SIGINT) 09:42:01.368607 run patchelf(pid=1156): Terminated: ok {rc=0} 09:42:01.404164 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1153): Process ended prematurely: osmo-stp_10.42.42.5(pid=1153) [trial-2387↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1153)] [trial-2387↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 09:42:01.414878 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 09:42:01.479789 run osmo-hlr_10.42.42.2(pid=1150): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1150)] 09:42:01.532230 run osmo-hlr_10.42.42.2(pid=1150): stdout: | (launched: 2022-12-13_09:41:57.926112) 09:42:01.586834 run osmo-hlr_10.42.42.2(pid=1150): stderr: | �[0;m�[1;31m20221213094158123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213094158123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213094158123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213094158123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213094158123 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213094158124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213094158139 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213094158149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213094158149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213094158149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:42:01.632629 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1142): Terminating (SIGTERM) 09:42:01.676404 run iperf3-srv_10.42.42.10(pid=1144): Terminating (SIGTERM) 09:42:01.721845 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1145): Terminating (SIGTERM) 09:42:01.764898 run iperf3-srv_10.42.42.10(pid=1146): Terminating (SIGTERM) 09:42:01.811695 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1149): Terminating (SIGTERM) 09:42:01.856233 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1152): Terminating (SIGTERM) 09:42:01.902311 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1155): Terminating (SIGTERM) 09:42:01.913592 --- ParallelTerminationStrategy: PID 1142 died... 09:42:01.973016 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1142): Terminated: ok {rc=0} 09:42:01.983616 --- ParallelTerminationStrategy: PID 1144 died... 09:42:02.039831 run iperf3-srv_10.42.42.10(pid=1144): Terminated {rc=256} 09:42:02.050525 --- ParallelTerminationStrategy: PID 1145 died... 09:42:02.106960 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1145): Terminated: ok {rc=0} 09:42:02.117398 --- ParallelTerminationStrategy: PID 1146 died... 09:42:02.175143 run iperf3-srv_10.42.42.10(pid=1146): Terminated {rc=256} 09:42:02.185684 --- ParallelTerminationStrategy: PID 1149 died... 09:42:02.239851 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1149): Terminated: ok {rc=0} 09:42:02.249484 --- ParallelTerminationStrategy: PID 1152 died... 09:42:02.303663 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1152): Terminated: ok {rc=0} 09:42:02.313305 --- ParallelTerminationStrategy: PID 1155 died... 09:42:02.367731 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1155): Terminated: ok {rc=0} 09:42:02.455223 bus /gobi_0: Setting Powered False 09:42:03.557466 bus /gobi_0: Setting Powered False 09:42:04.661837 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1153): Process ended prematurely: osmo-stp_10.42.42.5(pid=1153) [trial-2387↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1153)]