Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=11833): Process ended prematurely: osmo-stp_10.42.42.5(pid=11833) [trial-2388↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11833)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 11:01:47.316656 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:01:47.327517 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 11:01:47.467294 tst cs_paging_gprs_active.py: using LAC 33491 11:01:47.594569 tst cs_paging_gprs_active.py: using RAC 86 11:01:47.734141 tst cs_paging_gprs_active.py: using CellId 33491 11:01:47.867980 tst cs_paging_gprs_active.py: using BVCI 33492 11:01:47.893066 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:01:47.904406 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:01:47.915483 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:01:47.926530 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:01:47.938393 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:01:47.950112 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:01:47.962154 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:01:47.974014 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 11:01:47.986254 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 11:01:48.105305 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 11:01:48.402334 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:01:48.540114 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:01:48.879204 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11823): Launched 11:01:49.160159 run iperf3-srv_10.42.42.10(pid=11824): Launched 11:01:49.360486 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:01:49.497123 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:01:49.834973 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11825): Launched 11:01:50.115722 run iperf3-srv_10.42.42.10(pid=11826): Launched 11:01:50.316413 tst cs_paging_gprs_active.py:38: start network... 11:01:50.453272 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:01:50.966814 run create_hlr_db(pid=11827): Launched 11:01:51.155915 bus /sierra_2: Setting Powered False 11:01:52.176856 run create_hlr_db(pid=11827): Terminated: ok {rc=0} 11:01:52.586420 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11829): Launched 11:01:52.891868 run osmo-hlr_10.42.42.2(pid=11830): Launched 11:01:53.005048 run osmo-stp_10.42.42.5: Starting osmo-stp 11:01:53.532662 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11832): Launched 11:01:53.838086 run osmo-stp_10.42.42.5(pid=11833): Launched 11:01:53.949302 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:01:54.481799 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11835): Launched 11:01:54.590508 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:01:54.856743 run patchelf(pid=11836): Launched 11:01:55.035655 run osmo-stp_10.42.42.5(pid=11833): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11833)] 11:01:55.167196 run osmo-stp_10.42.42.5(pid=11833): stdout: | (launched: 2022-12-13_11:01:53.687481) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:01:55.297402 run osmo-stp_10.42.42.5(pid=11833): stderr: | �[0;m�[38;5;43m20221213110153861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213110153861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213110153861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213110153862 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213110153862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213110153862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213110153862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:01:55.423230 run osmo-stp_10.42.42.5(pid=11833): stdout: | (launched: 2022-12-13_11:01:53.687481) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:01:55.547597 run osmo-stp_10.42.42.5(pid=11833): stderr: | �[0;m�[38;5;43m20221213110153861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213110153861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213110153861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213110153862 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213110153862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213110153862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213110153862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:01:55.693462 run patchelf(pid=11836): Terminating (SIGINT) 11:01:55.865185 run patchelf(pid=11836): Terminated: ok {rc=0} 11:01:55.896676 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11833): Process ended prematurely: osmo-stp_10.42.42.5(pid=11833) [trial-2388↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11833)] [trial-2388↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 11:01:55.905854 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 11:01:55.965458 run osmo-hlr_10.42.42.2(pid=11830): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11830)] 11:01:56.014084 run osmo-hlr_10.42.42.2(pid=11830): stdout: | (launched: 2022-12-13_11:01:52.740799) 11:01:56.063374 run osmo-hlr_10.42.42.2(pid=11830): stderr: | �[0;m�[1;31m20221213110152917 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213110152917 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213110152918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213110152918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213110152918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213110152918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213110152930 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213110152939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213110152939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213110152939 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:01:56.105200 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11823): Terminating (SIGTERM) 11:01:56.144537 run iperf3-srv_10.42.42.10(pid=11824): Terminating (SIGTERM) 11:01:56.183953 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11825): Terminating (SIGTERM) 11:01:56.223217 run iperf3-srv_10.42.42.10(pid=11826): Terminating (SIGTERM) 11:01:56.262340 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11829): Terminating (SIGTERM) 11:01:56.301622 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11832): Terminating (SIGTERM) 11:01:56.340839 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11835): Terminating (SIGTERM) 11:01:56.350253 --- ParallelTerminationStrategy: PID 11823 died... 11:01:56.403452 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11823): Terminated: ok {rc=0} 11:01:56.413219 --- ParallelTerminationStrategy: PID 11824 died... 11:01:56.465825 run iperf3-srv_10.42.42.10(pid=11824): Terminated {rc=256} 11:01:56.475493 --- ParallelTerminationStrategy: PID 11825 died... 11:01:56.528204 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11825): Terminated: ok {rc=0} 11:01:56.537909 --- ParallelTerminationStrategy: PID 11826 died... 11:01:56.590426 run iperf3-srv_10.42.42.10(pid=11826): Terminated {rc=256} 11:01:56.600047 --- ParallelTerminationStrategy: PID 11829 died... 11:01:56.652539 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11829): Terminated: ok {rc=0} 11:01:56.662257 --- ParallelTerminationStrategy: PID 11832 died... 11:01:56.714926 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11832): Terminated: ok {rc=0} 11:01:56.724611 --- ParallelTerminationStrategy: PID 11835 died... 11:01:56.777373 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11835): Terminated: ok {rc=0} 11:01:56.865850 bus /gobi_0: Setting Powered False 11:01:57.969356 bus /gobi_0: Setting Powered False 11:01:59.076279 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11833): Process ended prematurely: osmo-stp_10.42.42.5(pid=11833) [trial-2388↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11833)]