Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=11284): Process ended prematurely: osmo-stp_10.42.42.5(pid=11284) [trial-2388↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11284)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 10:53:55.261429 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:53:55.273385 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 10:53:55.424068 tst cs_paging_gprs_active.py: using LAC 33449 10:53:55.552724 tst cs_paging_gprs_active.py: using RAC 44 10:53:55.685972 tst cs_paging_gprs_active.py: using CellId 33449 10:53:55.820488 tst cs_paging_gprs_active.py: using BVCI 33450 10:53:55.846413 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:53:55.858851 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:53:55.870816 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:53:55.882678 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:53:55.895556 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:53:55.908589 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:53:55.922059 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:53:55.934979 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 10:53:55.948391 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 10:53:56.078456 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 10:53:56.380549 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:53:56.520888 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:53:56.877069 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11274): Launched 10:53:57.181454 run iperf3-srv_10.42.42.10(pid=11275): Launched 10:53:57.389677 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:53:57.531944 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:53:57.890036 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11276): Launched 10:53:58.191297 run iperf3-srv_10.42.42.10(pid=11277): Launched 10:53:58.398963 tst cs_paging_gprs_active.py:38: start network... 10:53:58.542504 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:53:59.111345 run create_hlr_db(pid=11278): Launched 10:53:59.306839 bus /sierra_2: Setting Powered False 10:54:00.328734 run create_hlr_db(pid=11278): Terminated: ok {rc=0} 10:54:00.784292 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11280): Launched 10:54:01.273095 run osmo-hlr_10.42.42.2(pid=11281): Launched 10:54:01.463204 run osmo-stp_10.42.42.5: Starting osmo-stp 10:54:02.176071 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11283): Launched 10:54:02.617648 run osmo-stp_10.42.42.5(pid=11284): Launched 10:54:02.897021 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:54:03.621089 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11286): Launched 10:54:03.744707 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:54:04.049520 run patchelf(pid=11287): Launched 10:54:04.248156 run osmo-stp_10.42.42.5(pid=11284): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11284)] 10:54:04.393250 run osmo-stp_10.42.42.5(pid=11284): stdout: | (launched: 2022-12-13_10:54:02.337511) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:54:04.538924 run osmo-stp_10.42.42.5(pid=11284): stderr: | �[0;m�[38;5;43m20221213105402636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213105402636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213105402636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213105402636 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213105402641 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213105402641 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213105402641 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:54:04.679643 run osmo-stp_10.42.42.5(pid=11284): stdout: | (launched: 2022-12-13_10:54:02.337511) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:54:04.819737 run osmo-stp_10.42.42.5(pid=11284): stderr: | �[0;m�[38;5;43m20221213105402636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213105402636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213105402636 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213105402636 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213105402641 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213105402641 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213105402641 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:54:04.981598 run patchelf(pid=11287): Terminating (SIGINT) 10:54:05.171328 run patchelf(pid=11287): Terminated: ok {rc=0} 10:54:05.206982 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11284): Process ended prematurely: osmo-stp_10.42.42.5(pid=11284) [trial-2388↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11284)] [trial-2388↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 10:54:05.219148 tst cs_paging_gprs_active.py:38: Test FAILED (10.0 sec) 10:54:05.288400 run osmo-hlr_10.42.42.2(pid=11281): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11281)] 10:54:05.343022 run osmo-hlr_10.42.42.2(pid=11281): stdout: | (launched: 2022-12-13_10:54:00.989874) 10:54:05.398966 run osmo-hlr_10.42.42.2(pid=11281): stderr: | �[0;m�[1;31m20221213105401330 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213105401330 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213105401331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213105401331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213105401331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213105401331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213105401346 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213105401358 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213105401358 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213105401359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:54:05.447333 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11274): Terminating (SIGTERM) 10:54:05.494816 run iperf3-srv_10.42.42.10(pid=11275): Terminating (SIGTERM) 10:54:05.542268 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11276): Terminating (SIGTERM) 10:54:05.589457 run iperf3-srv_10.42.42.10(pid=11277): Terminating (SIGTERM) 10:54:05.637004 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11280): Terminating (SIGTERM) 10:54:05.684512 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11283): Terminating (SIGTERM) 10:54:05.731207 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11286): Terminating (SIGTERM) 10:54:05.743707 --- ParallelTerminationStrategy: PID 11274 died... 10:54:05.805633 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11274): Terminated: ok {rc=0} 10:54:05.817991 --- ParallelTerminationStrategy: PID 11275 died... 10:54:05.879332 run iperf3-srv_10.42.42.10(pid=11275): Terminated {rc=256} 10:54:05.890489 --- ParallelTerminationStrategy: PID 11276 died... 10:54:05.951344 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11276): Terminated: ok {rc=0} 10:54:05.962639 --- ParallelTerminationStrategy: PID 11277 died... 10:54:06.024338 run iperf3-srv_10.42.42.10(pid=11277): Terminated {rc=256} 10:54:06.035856 --- ParallelTerminationStrategy: PID 11280 died... 10:54:06.096735 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11280): Terminated: ok {rc=0} 10:54:06.107918 --- ParallelTerminationStrategy: PID 11283 died... 10:54:06.168571 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11283): Terminated: ok {rc=0} 10:54:06.179871 --- ParallelTerminationStrategy: PID 11286 died... 10:54:06.242615 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11286): Terminated: ok {rc=0} 10:54:06.335974 bus /gobi_0: Setting Powered False 10:54:07.449795 bus /gobi_0: Setting Powered False 10:54:08.567388 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11284): Process ended prematurely: osmo-stp_10.42.42.5(pid=11284) [trial-2388↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11284)]