Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=9597): Process ended prematurely: osmo-stp_10.42.42.5(pid=9597) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9597)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 10:37:44.332828 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:44.343753 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:37:44.484266 tst cs_paging_gprs_active.py: using LAC 33363 10:37:44.608198 tst cs_paging_gprs_active.py: using RAC 213 10:37:44.732523 tst cs_paging_gprs_active.py: using CellId 33363 10:37:44.856452 tst cs_paging_gprs_active.py: using BVCI 33364 10:37:44.880322 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:44.891278 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:44.902025 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:44.912844 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:44.923660 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:44.934889 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:44.945802 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:44.956332 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:37:44.967368 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:37:45.089860 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:37:45.394207 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:37:45.534833 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:37:45.887209 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9587): Launched 10:37:46.193298 run iperf3-srv_10.42.42.10(pid=9588): Launched 10:37:46.395030 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:37:46.535320 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:37:46.873865 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9589): Launched 10:37:47.170569 run iperf3-srv_10.42.42.10(pid=9590): Launched 10:37:47.380064 tst cs_paging_gprs_active.py:38: start network... 10:37:47.521160 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:37:48.055203 run create_hlr_db(pid=9591): Launched 10:37:48.249437 bus /gobi_6: Setting Powered False 10:37:49.270291 run create_hlr_db(pid=9591): Terminated: ok {rc=0} 10:37:49.695352 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9593): Launched 10:37:50.010328 run osmo-hlr_10.42.42.2(pid=9594): Launched 10:37:50.135726 run osmo-stp_10.42.42.5: Starting osmo-stp 10:37:50.681952 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9596): Launched 10:37:50.998110 run osmo-stp_10.42.42.5(pid=9597): Launched 10:37:51.110245 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:37:51.658404 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9599): Launched 10:37:51.770030 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:37:52.044737 run patchelf(pid=9600): Launched 10:37:52.227137 run osmo-stp_10.42.42.5(pid=9597): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9597)] 10:37:52.359940 run osmo-stp_10.42.42.5(pid=9597): stdout: | (launched: 2022-12-13_10:37:50.841110) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:37:52.493264 run osmo-stp_10.42.42.5(pid=9597): stderr: | �[0;m�[38;5;43m20221213103751012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213103751012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213103751012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213103751013 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213103751013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213103751013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213103751013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:37:52.622482 run osmo-stp_10.42.42.5(pid=9597): stdout: | (launched: 2022-12-13_10:37:50.841110) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:37:52.750022 run osmo-stp_10.42.42.5(pid=9597): stderr: | �[0;m�[38;5;43m20221213103751012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213103751012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213103751012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213103751013 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213103751013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213103751013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213103751013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:37:52.899233 run patchelf(pid=9600): Terminating (SIGINT) 10:37:53.074928 run patchelf(pid=9600): Terminated: ok {rc=0} 10:37:53.107142 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9597): Process ended prematurely: osmo-stp_10.42.42.5(pid=9597) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9597)] [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 10:37:53.116447 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 10:37:53.177451 run osmo-hlr_10.42.42.2(pid=9594): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9594)] 10:37:53.227338 run osmo-hlr_10.42.42.2(pid=9594): stdout: | (launched: 2022-12-13_10:37:49.854798) 10:37:53.278146 run osmo-hlr_10.42.42.2(pid=9594): stderr: | �[0;m�[1;31m20221213103750030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213103750030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213103750030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213103750030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213103750030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213103750030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213103750044 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213103750054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213103750054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213103750054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:37:53.321183 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9587): Terminating (SIGTERM) 10:37:53.361527 run iperf3-srv_10.42.42.10(pid=9588): Terminating (SIGTERM) 10:37:53.401877 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9589): Terminating (SIGTERM) 10:37:53.442050 run iperf3-srv_10.42.42.10(pid=9590): Terminating (SIGTERM) 10:37:53.482310 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9593): Terminating (SIGTERM) 10:37:53.522559 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9596): Terminating (SIGTERM) 10:37:53.562923 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9599): Terminating (SIGTERM) 10:37:53.572186 --- ParallelTerminationStrategy: PID 9587 died... 10:37:53.626175 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9587): Terminated: ok {rc=0} 10:37:53.635839 --- ParallelTerminationStrategy: PID 9588 died... 10:37:53.690351 run iperf3-srv_10.42.42.10(pid=9588): Terminated {rc=256} 10:37:53.700097 --- ParallelTerminationStrategy: PID 9589 died... 10:37:53.753705 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9589): Terminated: ok {rc=0} 10:37:53.763268 --- ParallelTerminationStrategy: PID 9590 died... 10:37:53.816741 run iperf3-srv_10.42.42.10(pid=9590): Terminated {rc=256} 10:37:53.826335 --- ParallelTerminationStrategy: PID 9593 died... 10:37:53.879594 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9593): Terminated: ok {rc=0} 10:37:53.889199 --- ParallelTerminationStrategy: PID 9596 died... 10:37:53.942713 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9596): Terminated: ok {rc=0} 10:37:53.952329 --- ParallelTerminationStrategy: PID 9599 died... 10:37:54.006395 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9599): Terminated: ok {rc=0} 10:37:54.096143 bus /gobi_0: Setting Powered False 10:37:55.202526 bus /gobi_0: Setting Powered False 10:37:56.316062 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9597): Process ended prematurely: osmo-stp_10.42.42.5(pid=9597) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9597)]