Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)

Failing for the past 262 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=17602): Process ended prematurely: osmo-stp_10.42.42.5(pid=17602) [trial-2400↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17602)]

Standard Output

----------------------------------------------
trial-2400 gprs:trx-lms-limenet-micro ping.py
----------------------------------------------
06:26:11.600557 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
06:26:11.612154 tst       gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
06:26:11.755276 tst                          ping.py: using LAC 39026
06:26:11.881195 tst                          ping.py: using RAC 11
06:26:12.004726 tst                          ping.py: using CellId 39026
06:26:12.124896 tst                          ping.py: using BVCI 39027
06:26:12.148596 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
06:26:12.159578 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
06:26:12.170412 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
06:26:12.181250 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
06:26:12.192279 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
06:26:12.203377 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
06:26:12.214609 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
06:26:12.225512 tst       gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
06:26:12.503425 tst                       ping.py:19: start network...
06:26:12.630407 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:26:13.108197 run         create_hlr_db(pid=17596): Launched
06:26:13.284894 bus                          /gobi_6: Setting Powered False
06:26:14.304598 run         create_hlr_db(pid=17596): Terminated: ok {rc=0}
06:26:14.735825 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17598): Launched
06:26:15.060874 run   osmo-hlr_10.42.42.2(pid=17599): Launched
06:26:15.179658 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:26:15.744479 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17601): Launched
06:26:16.350469 run   osmo-stp_10.42.42.5(pid=17602): Launched
06:26:16.602581 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:26:17.155236 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17604): Launched
06:26:17.267417 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:26:17.535023 run              patchelf(pid=17605): Launched
06:26:17.713843 run   osmo-stp_10.42.42.5(pid=17602): ERR: Terminated: ERROR {rc=1}  [trial-2400↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17602)]
06:26:17.844915 run   osmo-stp_10.42.42.5(pid=17602): stdout: 
| (launched: 2022-12-14_06:26:15.931638)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:26:17.976231 run   osmo-stp_10.42.42.5(pid=17602): stderr: 
| �[0;m�[38;5;43m20221214062616239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214062616239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214062616241 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214062616242 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214062616243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214062616243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214062616243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:26:18.102852 run   osmo-stp_10.42.42.5(pid=17602): stdout: 
| (launched: 2022-12-14_06:26:15.931638)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:26:18.227628 run   osmo-stp_10.42.42.5(pid=17602): stderr: 
| �[0;m�[38;5;43m20221214062616239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214062616239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214062616241 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214062616242 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214062616243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214062616243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214062616243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:26:18.373234 run              patchelf(pid=17605): Terminating (SIGINT)
06:26:18.544111 run              patchelf(pid=17605): Terminated: ok {rc=0}
06:26:18.575355 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=17602): Process ended prematurely: osmo-stp_10.42.42.5(pid=17602) [trial-2400↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17602)]  [trial-2400↪gprs:trx-lms-limenet-micro↪ping.py:22]
06:26:18.584142 tst                       ping.py:22: Test FAILED (7.0 sec)
06:26:18.644040 run   osmo-hlr_10.42.42.2(pid=17599): ERR: Terminated: ERROR {rc=237}  [trial-2400↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17599)]
06:26:18.693246 run   osmo-hlr_10.42.42.2(pid=17599): stdout: 
| (launched: 2022-12-14_06:26:14.900381) 
06:26:18.743138 run   osmo-hlr_10.42.42.2(pid=17599): stderr: 
| �[0;m�[1;31m20221214062615095 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214062615095 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214062615095 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214062615095 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214062615095 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214062615095 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214062615107 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214062615116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214062615116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214062615117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:26:18.786091 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17598): Terminating (SIGTERM)
06:26:18.826356 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17601): Terminating (SIGTERM)
06:26:18.866550 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17604): Terminating (SIGTERM)
06:26:18.875750 ---      ParallelTerminationStrategy: PID 17598 died...
06:26:18.930043 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17598): Terminated: ok {rc=0}
06:26:18.939638 ---      ParallelTerminationStrategy: PID 17601 died...
06:26:18.993321 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17601): Terminated: ok {rc=0}
06:26:19.002873 ---      ParallelTerminationStrategy: PID 17604 died...
06:26:19.056720 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17604): Terminated: ok {rc=0}
06:26:19.145191 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17602): Process ended prematurely: osmo-stp_10.42.42.5(pid=17602) [trial-2400↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17602)]