// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC * * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries * * Author: Sandeep Sheriker M */ #include #include #include #include #include #include #include / { #address-cells = <1>; #size-cells = <1>; model = "Microchip SAM9X60 SoC"; compatible = "microchip,sam9x60"; interrupt-parent = <&aic>; aliases { serial0 = &dbgu; gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; gpio3 = &pioD; tcb0 = &tcb0; tcb1 = &tcb1; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; reg = <0>; }; }; memory@20000000 { device_type = "memory"; reg = <0x20000000 0x10000000>; }; clocks { slow_xtal: slow_xtal { compatible = "fixed-clock"; #clock-cells = <0>; }; main_xtal: main_xtal { compatible = "fixed-clock"; #clock-cells = <0>; }; }; sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x100000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00300000 0x100000>; }; ahb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; usb0: gadget@500000 { #address-cells = <1>; #size-cells = <0>; compatible = "microchip,sam9x60-udc"; reg = <0x00500000 0x100000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>; assigned-clock-rates = <480000000>; status = "disabled"; }; usb1: ohci@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; usb2: ehci@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "usb_clk", "ehci_clk"; assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>; assigned-clock-rates = <480000000>; status = "disabled"; }; ebi: ebi@10000000 { compatible = "microchip,sam9x60-ebi"; #address-cells = <2>; #size-cells = <1>; atmel,smc = <&smc>; microchip,sfr = <&sfr>; reg = <0x10000000 0x60000000>; ranges = <0x0 0x0 0x10000000 0x10000000 0x1 0x0 0x20000000 0x10000000 0x2 0x0 0x30000000 0x10000000 0x3 0x0 0x40000000 0x10000000 0x4 0x0 0x50000000 0x10000000 0x5 0x0 0x60000000 0x10000000>; clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { compatible = "microchip,sam9x60-nand-controller"; ecc-engine = <&pmecc>; #address-cells = <2>; #size-cells = <1>; ranges; status = "disabled"; }; }; sdmmc0: sdio-host@80000000 { compatible = "microchip,sam9x60-sdhci"; reg = <0x80000000 0x300>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>; clock-names = "hclock", "multclk"; assigned-clocks = <&pmc PMC_TYPE_GCK 12>; assigned-clock-rates = <100000000>; status = "disabled"; }; sdmmc1: sdio-host@90000000 { compatible = "microchip,sam9x60-sdhci"; reg = <0x90000000 0x300>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>; clock-names = "hclock", "multclk"; assigned-clocks = <&pmc PMC_TYPE_GCK 26>; assigned-clock-rates = <100000000>; status = "disabled"; }; apb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; flx4: flexcom@f0000000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf0000000 0x200>; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf0000000 0x800>; status = "disabled"; uart4: serial@200 { compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(8))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(9))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "usart"; atmel,usart-mode = ; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; status = "disabled"; }; spi4: spi@400 { compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(8))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(9))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; i2c4: i2c@600 { compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(8))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(9))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; }; flx5: flexcom@f0004000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf0004000 0x200>; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf0004000 0x800>; status = "disabled"; uart5: serial@200 { compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; atmel,usart-mode = ; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(10))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(11))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "usart"; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; status = "disabled"; }; spi5: spi@400 { compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "spi_clk"; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(10))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(11))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; i2c5: i2c@600 { compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(10))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(11))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; }; dma0: dma-controller@f0008000 { compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma"; reg = <0xf0008000 0x1000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; clock-names = "dma_clk"; }; ssc: ssc@f0010000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(38))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(39))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; clock-names = "pclk"; status = "disabled"; }; qspi: spi@f0014000 { compatible = "microchip,sam9x60-qspi"; reg = <0xf0014000 0x100>, <0x70000000 0x10000000>; reg-names = "qspi_base", "qspi_mmap"; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(26))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(27))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>; clock-names = "pclk", "qspick"; atmel,pmc = <&pmc>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2s: i2s@f001c000 { compatible = "microchip,sam9x60-i2smcc"; reg = <0xf001c000 0x100>; interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(36))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(37))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>; clock-names = "pclk", "gclk"; status = "disabled"; }; flx11: flexcom@f0020000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf0020000 0x200>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf0020000 0x800>; status = "disabled"; uart11: serial@200 { compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(22))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(23))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; clock-names = "usart"; atmel,usart-mode = ; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; status = "disabled"; }; i2c11: i2c@600 { compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(22))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(23))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; }; flx12: flexcom@f0024000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf0024000 0x200>; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf0024000 0x800>; status = "disabled"; uart12: serial@200 { compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(24))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; clock-names = "usart"; atmel,usart-mode = ; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; status = "disabled"; }; i2c12: i2c@600 { compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(24))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; }; pit64b: timer@f0028000 { compatible = "microchip,sam9x60-pit64b"; reg = <0xf0028000 0x100>; interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>; clock-names = "pclk", "gclk"; }; sha: crypto@f002c000 { compatible = "atmel,at91sam9g46-sha"; reg = <0xf002c000 0x100>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(34))>; dma-names = "tx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; clock-names = "sha_clk"; }; trng: rng@f0030000 { compatible = "microchip,sam9x60-trng"; reg = <0xf0030000 0x100>; interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; }; aes: crypto@f0034000 { compatible = "atmel,at91sam9g46-aes"; reg = <0xf0034000 0x100>; interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(32))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(33))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; clock-names = "aes_clk"; }; tdes: crypto@f0038000 { compatible = "atmel,at91sam9g46-tdes"; reg = <0xf0038000 0x100>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(31))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(30))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; clock-names = "tdes_clk"; }; classd: classd@f003c000 { compatible = "atmel,sama5d2-classd"; reg = <0xf003c000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(35))>; dma-names = "tx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>; clock-names = "pclk", "gclk"; status = "disabled"; }; can0: can@f8000000 { compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can"; reg = <0xf8000000 0x300>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>; clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; clock-names = "can_clk"; status = "disabled"; }; can1: can@f8004000 { compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can"; reg = <0xf8004000 0x300>; interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>; clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; clock-names = "can_clk"; status = "disabled"; }; tcb0: timer@f8008000 { compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; #address-cells = <1>; #size-cells = <0>; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>; clock-names = "t0_clk", "slow_clk"; }; tcb1: timer@f800c000 { compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; #address-cells = <1>; #size-cells = <0>; reg = <0xf800c000 0x100>; interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>; clock-names = "t0_clk", "slow_clk"; }; flx6: flexcom@f8010000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8010000 0x200>; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf8010000 0x800>; status = "disabled"; uart6: serial@200 { compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(12))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(13))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "usart"; atmel,usart-mode = ; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; status = "disabled"; }; i2c6: i2c@600 { compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(12))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(13))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; }; flx7: flexcom@f8014000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8014000 0x200>; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf8014000 0x800>; status = "disabled"; uart7: serial@200 { compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(14))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(15))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; clock-names = "usart"; atmel,usart-mode = ; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; status = "disabled"; }; i2c7: i2c@600 { compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(14))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(15))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; }; flx8: flexcom@f8018000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8018000 0x200>; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf8018000 0x800>; status = "disabled"; uart8: serial@200 { compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(16))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(17))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; clock-names = "usart"; atmel,usart-mode = ; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; status = "disabled"; }; i2c8: i2c@600 { compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(16))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(17))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; }; flx0: flexcom@f801c000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf801c000 0x200>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf801c000 0x800>; status = "disabled"; uart0: serial@200 { compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(0))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(1))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "usart"; atmel,usart-mode = ; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; status = "disabled"; }; spi0: spi@400 { compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "spi_clk"; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(0))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(1))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; i2c0: i2c@600 { compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(0))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(1))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; }; flx1: flexcom@f8020000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8020000 0x200>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf8020000 0x800>; status = "disabled"; uart1: serial@200 { compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(2))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(3))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; atmel,usart-mode = ; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; status = "disabled"; }; spi1: spi@400 { compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "spi_clk"; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(2))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(3))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; i2c1: i2c@600 { compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(2))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(3))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; }; flx2: flexcom@f8024000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8024000 0x200>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf8024000 0x800>; status = "disabled"; uart2: serial@200 { compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(4))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(5))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; atmel,usart-mode = ; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; status = "disabled"; }; spi2: spi@400 { compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "spi_clk"; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(4))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(5))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; i2c2: i2c@600 { compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(4))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(5))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; }; flx3: flexcom@f8028000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8028000 0x200>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf8028000 0x800>; status = "disabled"; uart3: serial@200 { compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(6))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(7))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; atmel,usart-mode = ; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; status = "disabled"; }; spi3: spi@400 { compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "spi_clk"; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(6))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(7))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; i2c3: i2c@600 { compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(6))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(7))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; }; macb0: ethernet@f802c000 { compatible = "cdns,sam9x60-macb", "cdns,macb"; reg = <0xf802c000 0x1000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "hclk", "pclk"; status = "disabled"; }; macb1: ethernet@f8030000 { compatible = "cdns,sam9x60-macb", "cdns,macb"; reg = <0xf8030000 0x1000>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>; clock-names = "hclk", "pclk"; status = "disabled"; }; pwm0: pwm@f8034000 { compatible = "microchip,sam9x60-pwm"; reg = <0xf8034000 0x300>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; #pwm-cells = <3>; status = "disabled"; }; hlcdc: hlcdc@f8038000 { compatible = "microchip,sam9x60-hlcdc"; reg = <0xf8038000 0x4000>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>; clock-names = "periph_clk","sys_clk", "slow_clk"; assigned-clocks = <&pmc PMC_TYPE_GCK 25>; assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; hlcdc-display-controller { compatible = "atmel,hlcdc-display-controller"; #address-cells = <1>; #size-cells = <0>; port@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; }; }; hlcdc_pwm: hlcdc-pwm { compatible = "atmel,hlcdc-pwm"; #pwm-cells = <3>; }; }; flx9: flexcom@f8040000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8040000 0x200>; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf8040000 0x800>; status = "disabled"; uart9: serial@200 { compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(18))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(19))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "usart"; atmel,usart-mode = ; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; status = "disabled"; }; i2c9: i2c@600 { compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(18))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(19))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; }; flx10: flexcom@f8044000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8044000 0x200>; clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf8044000 0x800>; status = "disabled"; uart10: serial@200 { compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(20))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(21))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "usart"; atmel,usart-mode = ; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; status = "disabled"; }; i2c10: i2c@600 { compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(20))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(21))>; dma-names = "tx", "rx"; atmel,fifo-size = <16>; status = "disabled"; }; }; isi: isi@f8048000 { compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi"; reg = <0xf8048000 0x100>; interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>; clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; clock-names = "isi_clk"; status = "disabled"; port { #address-cells = <1>; #size-cells = <0>; }; }; adc: adc@f804c000 { compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc"; reg = <0xf804c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; clock-names = "adc_clk"; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>; dma-names = "rx"; atmel,min-sample-rate-hz = <200000>; atmel,max-sample-rate-hz = <20000000>; atmel,startup-time-ms = <4>; atmel,trigger-edge-type = ; #io-channel-cells = <1>; status = "disabled"; }; sfr: sfr@f8050000 { compatible = "microchip,sam9x60-sfr", "syscon"; reg = <0xf8050000 0x100>; }; matrix: matrix@ffffde00 { compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon"; reg = <0xffffde00 0x200>; }; pmecc: ecc-engine@ffffe000 { compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc"; reg = <0xffffe000 0x300>, <0xffffe600 0x100>; }; mpddrc: mpddrc@ffffe800 { compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc"; reg = <0xffffe800 0x200>; clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>; clock-names = "ddrck", "mpddr"; }; smc: smc@ffffea00 { compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon"; reg = <0xffffea00 0x100>; }; aic: interrupt-controller@fffff100 { compatible = "microchip,sam9x60-aic"; #interrupt-cells = <3>; interrupt-controller; reg = <0xfffff100 0x100>; atmel,external-irqs = <31>; }; dbgu: serial@fffff200 { compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; atmel,usart-mode = ; interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(28))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(29))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; clock-names = "usart"; status = "disabled"; }; pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; compatible = "microchip,sam9x60-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; /* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */ atmel,mux-mask = < /* A B C */ 0xffffffff 0xffe03fff 0xef00019d /* pioA */ 0x03ffffff 0x02fc7e7f 0x00780000 /* pioB */ 0xffffffff 0xffffffff 0xf83fffff /* pioC */ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; pioA: gpio@fffff400 { compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff600 { compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <26>; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff800 { compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; pioD: gpio@fffffa00 { compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <22>; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; }; }; pmc: clock-controller@fffffc00 { compatible = "microchip,sam9x60-pmc", "syscon"; reg = <0xfffffc00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; #clock-cells = <2>; clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; clock-names = "td_slck", "md_slck", "main_xtal"; }; reset_controller: reset-controller@fffffe00 { compatible = "microchip,sam9x60-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k 0>; }; shutdown_controller: poweroff@fffffe10 { compatible = "microchip,sam9x60-shdwc"; reg = <0xfffffe10 0x10>; clocks = <&clk32k 0>; #address-cells = <1>; #size-cells = <0>; atmel,wakeup-rtc-timer; atmel,wakeup-rtt-timer; status = "disabled"; }; rtt: rtc@fffffe20 { compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xfffffe20 0x20>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k 1>; }; pit: timer@fffffe40 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; clk32k: clock-controller@fffffe50 { compatible = "microchip,sam9x60-sckc"; reg = <0xfffffe50 0x4>; clocks = <&slow_xtal>; #clock-cells = <1>; }; gpbr: syscon@fffffe60 { compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon"; reg = <0xfffffe60 0x10>; }; rtc: rtc@fffffea8 { compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc"; reg = <0xfffffea8 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k 1>; }; watchdog: watchdog@ffffff80 { compatible = "microchip,sam9x60-wdt"; reg = <0xffffff80 0x24>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k 0>; status = "disabled"; }; }; }; };