// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches */ #include #include #include #include #include #include / { #address-cells = <1>; #size-cells = <1>; model = "Atmel SAMA5D3 family SoC"; compatible = "atmel,sama5d3", "atmel,sama5"; interrupt-parent = <&aic>; aliases { serial0 = &dbgu; serial1 = &usart0; serial2 = &usart1; serial3 = &usart2; serial4 = &usart3; serial5 = &uart0; gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; gpio3 = &pioD; gpio4 = &pioE; tcb0 = &tcb0; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; ssc0 = &ssc0; ssc1 = &ssc1; pwm0 = &pwm0; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a5"; reg = <0x0>; }; }; pmu { compatible = "arm,cortex-a5-pmu"; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>; }; memory@20000000 { device_type = "memory"; reg = <0x20000000 0x8000000>; }; clocks { slow_xtal: slow_xtal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; main_xtal: main_xtal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; adc_op_clk: adc_op_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1000000>; }; }; sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x20000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00300000 0x20000>; }; ahb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; apb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; mmc0: mmc@f0000000 { compatible = "atmel,hsmci"; reg = <0xf0000000 0x600>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "mci_clk"; }; spi0: spi@f0004000 { #address-cells = <1>; #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>, <&dma0 2 AT91_DMA_CFG_PER_ID(2)>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "spi_clk"; status = "disabled"; }; ssc0: ssc@f0008000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0008000 0x4000>; interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>, <&dma0 2 AT91_DMA_CFG_PER_ID(14)>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; clock-names = "pclk"; status = "disabled"; }; tcb0: timer@f0010000 { compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; #address-cells = <1>; #size-cells = <0>; reg = <0xf0010000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; i2c0: i2c@f0014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0014000 0x4000>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>, <&dma0 2 AT91_DMA_CFG_PER_ID(8)>; dma-names = "tx", "rx"; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; status = "disabled"; }; i2c1: i2c@f0018000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0018000 0x4000>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>, <&dma0 2 AT91_DMA_CFG_PER_ID(10)>; dma-names = "tx", "rx"; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>; scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; status = "disabled"; }; usart0: serial@f001c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; atmel,usart-mode = ; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "usart"; status = "disabled"; }; usart1: serial@f0020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0020000 0x100>; atmel,usart-mode = ; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>, <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "usart"; status = "disabled"; }; uart0: serial@f0024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0024000 0x100>; atmel,usart-mode = ; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "usart"; status = "disabled"; }; pwm0: pwm@f002c000 { compatible = "atmel,sama5d3-pwm"; reg = <0xf002c000 0x300>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; status = "disabled"; }; isi: isi@f0034000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xf0034000 0x4000>; interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_isi_data_0_7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; clock-names = "isi_clk"; status = "disabled"; port { #address-cells = <1>; #size-cells = <0>; }; }; sfr: sfr@f0038000 { compatible = "atmel,sama5d3-sfr", "syscon"; reg = <0xf0038000 0x60>; }; mmc1: mmc@f8000000 { compatible = "atmel,hsmci"; reg = <0xf8000000 0x600>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "mci_clk"; }; spi1: spi@f8008000 { #address-cells = <1>; #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf8008000 0x100>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>, <&dma1 2 AT91_DMA_CFG_PER_ID(16)>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; clock-names = "spi_clk"; status = "disabled"; }; ssc1: ssc@f800c000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf800c000 0x4000>; interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>, <&dma1 2 AT91_DMA_CFG_PER_ID(4)>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; clock-names = "pclk"; status = "disabled"; }; adc0: adc@f8018000 { compatible = "atmel,sama5d3-adc"; reg = <0xf8018000 0x100>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = < &pinctrl_adc0_adtrg &pinctrl_adc0_ad0 &pinctrl_adc0_ad1 &pinctrl_adc0_ad2 &pinctrl_adc0_ad3 &pinctrl_adc0_ad4 &pinctrl_adc0_ad5 &pinctrl_adc0_ad6 &pinctrl_adc0_ad7 &pinctrl_adc0_ad8 &pinctrl_adc0_ad9 &pinctrl_adc0_ad10 &pinctrl_adc0_ad11 >; clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channels-used = <0xfff>; atmel,adc-startup-time = <40>; atmel,adc-use-external-triggers; atmel,adc-vref = <3000>; atmel,adc-sample-hold-time = <11>; status = "disabled"; }; i2c2: i2c@f801c000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf801c000 0x4000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>, <&dma1 2 AT91_DMA_CFG_PER_ID(12)>; dma-names = "tx", "rx"; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>; scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; status = "disabled"; }; usart2: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; atmel,usart-mode = ; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>, <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "usart"; status = "disabled"; }; usart3: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; atmel,usart-mode = ; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>, <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "usart"; status = "disabled"; }; sha: crypto@f8034000 { compatible = "atmel,at91sam9g46-sha"; reg = <0xf8034000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; dma-names = "tx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; clock-names = "sha_clk"; }; aes: crypto@f8038000 { compatible = "atmel,at91sam9g46-aes"; reg = <0xf8038000 0x100>; interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; clock-names = "aes_clk"; }; tdes: crypto@f803c000 { compatible = "atmel,at91sam9g46-tdes"; reg = <0xf803c000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; clock-names = "tdes_clk"; }; trng: rng@f8040000 { compatible = "atmel,at91sam9g45-trng"; reg = <0xf8040000 0x100>; interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; }; hsmc: hsmc@ffffc000 { compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; reg = <0xffffc000 0x1000>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; #address-cells = <1>; #size-cells = <1>; ranges; pmecc: ecc-engine@ffffc070 { compatible = "atmel,at91sam9g45-pmecc"; reg = <0xffffc070 0x490>, <0xffffc500 0x100>; }; }; dma0: dma-controller@ffffe600 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe600 0x200>; interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; clock-names = "dma_clk"; }; dma1: dma-controller@ffffe800 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe800 0x200>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 31>; clock-names = "dma_clk"; }; ramc0: ramc@ffffea00 { compatible = "atmel,sama5d3-ddramc"; reg = <0xffffea00 0x200>; clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>; clock-names = "ddrck", "mpddr"; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; atmel,usart-mode = ; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; clock-names = "usart"; status = "disabled"; }; aic: interrupt-controller@fffff000 { #interrupt-cells = <3>; compatible = "atmel,sama5d3-aic"; interrupt-controller; reg = <0xfffff000 0x200>; atmel,external-irqs = <47>; }; pinctrl: pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,sama5d3-pinctrl", "simple-mfd"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < /* A B C */ 0xffffffff 0xc0fc0000 0xc0ff0000 /* pioA */ 0xffffffff 0x0ff8ffff 0x00000000 /* pioB */ 0xffffffff 0xbc00f1ff 0x7c00fc00 /* pioC */ 0xffffffff 0xc001c0e0 0x0001c1e0 /* pioD */ 0xffffffff 0xbf9f8000 0x18000000 /* pioE */ >; /* shared pinctrl settings */ adc0 { pinctrl_adc0_adtrg: adc0_adtrg { atmel,pins = ; /* PD19 periph A ADTRG */ }; pinctrl_adc0_ad0: adc0_ad0 { atmel,pins = ; /* PD20 periph A AD0 */ }; pinctrl_adc0_ad1: adc0_ad1 { atmel,pins = ; /* PD21 periph A AD1 */ }; pinctrl_adc0_ad2: adc0_ad2 { atmel,pins = ; /* PD22 periph A AD2 */ }; pinctrl_adc0_ad3: adc0_ad3 { atmel,pins = ; /* PD23 periph A AD3 */ }; pinctrl_adc0_ad4: adc0_ad4 { atmel,pins = ; /* PD24 periph A AD4 */ }; pinctrl_adc0_ad5: adc0_ad5 { atmel,pins = ; /* PD25 periph A AD5 */ }; pinctrl_adc0_ad6: adc0_ad6 { atmel,pins = ; /* PD26 periph A AD6 */ }; pinctrl_adc0_ad7: adc0_ad7 { atmel,pins = ; /* PD27 periph A AD7 */ }; pinctrl_adc0_ad8: adc0_ad8 { atmel,pins = ; /* PD28 periph A AD8 */ }; pinctrl_adc0_ad9: adc0_ad9 { atmel,pins = ; /* PD29 periph A AD9 */ }; pinctrl_adc0_ad10: adc0_ad10 { atmel,pins = ; /* PD30 periph A AD10, conflicts with PCK0 */ }; pinctrl_adc0_ad11: adc0_ad11 { atmel,pins = ; /* PD31 periph A AD11, conflicts with PCK1 */ }; }; dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = ; }; }; ebi { pinctrl_ebi_addr: ebi-addr-0 { atmel,pins = ; }; pinctrl_ebi_nand_addr: ebi-addr-1 { atmel,pins = ; }; pinctrl_ebi_cs0: ebi-cs0-0 { atmel,pins = ; }; pinctrl_ebi_cs1: ebi-cs1-0 { atmel,pins = ; }; pinctrl_ebi_cs2: ebi-cs2-0 { atmel,pins = ; }; pinctrl_ebi_nwait: ebi-nwait-0 { atmel,pins = ; }; pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 { atmel,pins = ; }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = ; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ }; pinctrl_i2c0_gpio: i2c0-gpio { atmel,pins = ; }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = ; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ }; pinctrl_i2c1_gpio: i2c1-gpio { atmel,pins = ; }; }; i2c2 { pinctrl_i2c2: i2c2-0 { atmel,pins = ; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */ }; pinctrl_i2c2_gpio: i2c2-gpio { atmel,pins = ; }; }; isi { pinctrl_isi_data_0_7: isi-0-data-0-7 { atmel,pins = ; /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ }; pinctrl_isi_data_8_9: isi-0-data-8-9 { atmel,pins = ; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ }; pinctrl_isi_data_10_11: isi-0-data-10-11 { atmel,pins = ; /* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */ }; }; mmc0 { pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { atmel,pins = ; /* PD1 periph A MCI0_DA0 with pullup */ }; pinctrl_mmc0_dat1_3: mmc0_dat1_3 { atmel,pins = ; /* PD4 periph A MCI0_DA3 with pullup */ }; pinctrl_mmc0_dat4_7: mmc0_dat4_7 { atmel,pins = ; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ }; }; mmc1 { pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { atmel,pins = ; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ }; pinctrl_mmc1_dat1_3: mmc1_dat1_3 { atmel,pins = ; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ }; }; nand0 { pinctrl_nand0_ale_cle: nand0_ale_cle-0 { atmel,pins = ; /* PE22 periph A with pullup */ }; }; pwm0 { pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 { atmel,pins = ; /* conflicts with ISI_D4 and LCDDAT20 */ }; pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 { atmel,pins = ; /* conflicts with GTX0 */ }; pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 { atmel,pins = ; /* conflicts with ISI_D5 and LCDDAT21 */ }; pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 { atmel,pins = ; /* conflicts with GTX1 */ }; pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 { atmel,pins = ; /* conflicts with ISI_D6 and LCDDAT22 */ }; pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 { atmel,pins = ; /* conflicts with GRX0 */ }; pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 { atmel,pins = ; /* conflicts with G125CKO and RTS1 */ }; pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 { atmel,pins = ; /* conflicts with ISI_D7 and LCDDAT23 */ }; pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 { atmel,pins = ; /* conflicts with GRX1 */ }; pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 { atmel,pins = ; /* conflicts with IRQ */ }; pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 { atmel,pins = ; /* conflicts with GTXCK */ }; pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 { atmel,pins = ; /* conflicts with MCI0_DA4 and TIOA0 */ }; pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 { atmel,pins = ; /* conflicts with GTXEN */ }; pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 { atmel,pins = ; /* conflicts with MCI0_DA5 and TIOB0 */ }; pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 { atmel,pins = ; /* conflicts with GRXDV */ }; pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 { atmel,pins = ; /* conflicts with MCI0_DA6 and TCLK0 */ }; pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 { atmel,pins = ; /* conflicts with GRXER */ }; pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 { atmel,pins = ; /* conflicts with MCI0_DA7 */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = ; /* PD12 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = ; /* PC24 periph A SPI1_SPCK pin */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx { atmel,pins = ; /* PC18 periph A TD0 */ }; pinctrl_ssc0_rx: ssc0_rx { atmel,pins = ; /* PC21 periph A RD0 */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx { atmel,pins = ; /* PB6 periph B TD1, conflicts with TD1 */ }; pinctrl_ssc1_rx: ssc1_rx { atmel,pins = ; /* PB11 periph B RD1, conflicts with GRXCK */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = ; /* conflicts with ISI_PCK */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = ; /* conflicts with TWCK0, ISI_HSYNC */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = ; }; pinctrl_usart0_rts_cts: usart0_rts_cts-0 { atmel,pins = ; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = ; }; pinctrl_usart1_rts_cts: usart1_rts_cts-0 { atmel,pins = ; /* PB27 periph A, conflicts with G125CKO */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = ; /* conflicts NCS0 */ }; pinctrl_usart2_rts_cts: usart2_rts_cts-0 { atmel,pins = ; /* PE24 periph B, conflicts with A24 */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = ; /* conflicts with A19 */ }; pinctrl_usart3_rts_cts: usart3_rts_cts-0 { atmel,pins = ; /* PE17 periph B, conflicts with A17 */ }; }; pioA: gpio@fffff200 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x100>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; }; pioB: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; }; pioC: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; }; pioD: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; }; pioE: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; }; }; pmc: clock-controller@fffffc00 { compatible = "atmel,sama5d3-pmc", "syscon"; reg = <0xfffffc00 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; #clock-cells = <2>; clocks = <&clk32k>, <&main_xtal>; clock-names = "slow_clk", "main_xtal"; }; reset_controller: reset-controller@fffffe00 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k>; }; shutdown_controller: poweroff@fffffe10 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfffffe10 0x10>; clocks = <&clk32k>; }; pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; watchdog: watchdog@fffffe40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffe40 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; status = "disabled"; }; clk32k: clock-controller@fffffe50 { compatible = "atmel,sama5d3-sckc"; reg = <0xfffffe50 0x4>; clocks = <&slow_xtal>; #clock-cells = <0>; }; rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; }; }; nfc_sram: sram@200000 { compatible = "mmio-sram"; no-memory-wc; reg = <0x200000 0x2400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x200000 0x2400>; }; usb0: gadget@500000 { compatible = "atmel,sama5d3-udc"; reg = <0x00500000 0x100000 0xf8030000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; }; usb1: ohci@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; usb2: ehci@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; ebi: ebi@10000000 { compatible = "atmel,sama5d3-ebi"; #address-cells = <2>; #size-cells = <1>; atmel,smc = <&hsmc>; reg = <0x10000000 0x10000000 0x40000000 0x30000000>; ranges = <0x0 0x0 0x10000000 0x10000000 0x1 0x0 0x40000000 0x10000000 0x2 0x0 0x50000000 0x10000000 0x3 0x0 0x60000000 0x10000000>; clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { compatible = "atmel,sama5d3-nand-controller"; atmel,nfc-sram = <&nfc_sram>; atmel,nfc-io = <&nfc_io>; ecc-engine = <&pmecc>; #address-cells = <2>; #size-cells = <1>; ranges; status = "disabled"; }; }; nfc_io: nfc-io@70000000 { compatible = "atmel,sama5d3-nfc-io", "syscon"; reg = <0x70000000 0x8000000>; }; }; };