// SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2018, The Linux Foundation. All rights reserved. #include "qcom-ipq4019.dtsi" #include #include / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1"; aliases { serial0 = &blsp1_uart1; serial1 = &blsp1_uart2; }; chosen { stdout-path = "serial0:115200n8"; }; memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256MB */ }; soc { pinctrl@1000000 { serial_0_pins: serial0-state { pins = "gpio16", "gpio17"; function = "blsp_uart0"; bias-disable; }; serial_1_pins: serial1-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "blsp_uart1"; bias-disable; }; spi_0_pins: spi-0-state { spi0-pins { function = "blsp_spi0"; pins = "gpio13", "gpio14", "gpio15"; bias-disable; }; spi0-cs-pins { function = "gpio"; pins = "gpio12"; bias-disable; output-high; }; }; i2c_0_pins: i2c-0-state { pins = "gpio20", "gpio21"; function = "blsp_i2c0"; bias-disable; }; nand_pins: nand-state { pins = "gpio53", "gpio55", "gpio56", "gpio57", "gpio58", "gpio59", "gpio60", "gpio62", "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69"; function = "qpic"; }; }; serial@78af000 { pinctrl-0 = <&serial_0_pins>; pinctrl-names = "default"; status = "okay"; }; serial@78b0000 { pinctrl-0 = <&serial_1_pins>; pinctrl-names = "default"; status = "okay"; }; dma-controller@7884000 { status = "okay"; }; spi@78b5000 { /* BLSP1 QUP1 */ pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; flash@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <24000000>; }; }; pcie@40000000 { status = "okay"; perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; }; }; &nand { pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; };