// SPDX-License-Identifier: GPL-2.0-only #include "qcom-msm8974pro.dtsi" #include "pm8841.dtsi" #include "pm8941.dtsi" #include / { model = "HTC One (M8)"; compatible = "htc,m8", "qcom,msm8974pro", "qcom,msm8974"; chassis-type = "handset"; aliases { mmc0 = &sdhc_1; }; gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&gpio_keys_default>; pinctrl-names = "default"; key-volume-down { label = "volume_down"; gpios = <&tlmm 27 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <20>; wakeup-source; }; key-volume-up { label = "volume_up"; gpios = <&tlmm 28 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <20>; wakeup-source; }; }; vreg_boost: vreg-boost { compatible = "regulator-fixed"; regulator-name = "vreg-boost"; regulator-min-microvolt = <3150000>; regulator-max-microvolt = <3150000>; regulator-always-on; regulator-boot-on; gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-0 = <&boost_bypass_n_pin>; pinctrl-names = "default"; }; vreg_vph_pwr: vreg-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph-pwr"; regulator-min-microvolt = <3600000>; regulator-max-microvolt = <3600000>; regulator-always-on; }; }; &pm8941_vib { status = "okay"; }; &pronto { vddmx-supply = <&pm8841_s1>; vddcx-supply = <&pm8841_s2>; vddpx-supply = <&pm8941_s3>; pinctrl-0 = <&wcnss_pin_a>; pinctrl-names = "default"; status = "okay"; iris { vddxo-supply = <&pm8941_l6>; vddrfa-supply = <&pm8941_l11>; vddpa-supply = <&pm8941_l19>; vdddig-supply = <&pm8941_s3>; }; smd-edge { qcom,remote-pid = <4>; label = "pronto"; wcnss { status = "okay"; }; }; }; &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm8841-regulators"; pm8841_s1: s1 { regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; }; pm8841_s2: s2 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <1050000>; }; pm8841_s3: s3 { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; }; pm8841_s4: s4 { regulator-min-microvolt = <815000>; regulator-max-microvolt = <900000>; }; }; regulators-1 { compatible = "qcom,rpm-pm8941-regulators"; vdd_l1_l3-supply = <&pm8941_s1>; vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; vdd_l4_l11-supply = <&pm8941_s1>; vdd_l5_l7-supply = <&pm8941_s2>; vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; vdd_l9_l10_l17_l22-supply = <&vreg_boost>; vdd_l13_l20_l23_l24-supply = <&vreg_boost>; vdd_l21-supply = <&vreg_boost>; pm8941_s1: s1 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; regulator-always-on; regulator-boot-on; }; pm8941_s2: s2 { regulator-min-microvolt = <2150000>; regulator-max-microvolt = <2150000>; regulator-boot-on; }; pm8941_s3: s3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; pm8941_l1: l1 { regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; regulator-always-on; regulator-boot-on; }; pm8941_l2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; pm8941_l3: l3 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; pm8941_l4: l4 { regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; }; pm8941_l5: l5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; pm8941_l6: l6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; }; pm8941_l7: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; }; pm8941_l8: l8 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; pm8941_l9: l9 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2950000>; }; pm8941_l10: l10 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2950000>; }; pm8941_l11: l11 { regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1350000>; }; pm8941_l12: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; pm8941_l13: l13 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2950000>; regulator-boot-on; }; pm8941_l14: l14 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; pm8941_l15: l15 { regulator-min-microvolt = <2050000>; regulator-max-microvolt = <2050000>; }; pm8941_l16: l16 { regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2700000>; }; pm8941_l17: l17 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; pm8941_l18: l18 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; pm8941_l19: l19 { regulator-min-microvolt = <2900000>; regulator-max-microvolt = <3350000>; }; pm8941_l20: l20 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; regulator-system-load = <200000>; regulator-allow-set-load; regulator-boot-on; }; pm8941_l21: l21 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; regulator-boot-on; }; pm8941_l22: l22 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; pm8941_l23: l23 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; pm8941_l24: l24 { regulator-min-microvolt = <3075000>; regulator-max-microvolt = <3075000>; regulator-boot-on; }; }; }; &sdhc_1 { vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; pinctrl-0 = <&sdc1_on>; pinctrl-1 = <&sdc1_off>; pinctrl-names = "default", "sleep"; status = "okay"; }; &smbb { status = "okay"; }; &tlmm { gpio_keys_default: gpio-keys-default-state { pins = "gpio27", "gpio28"; function = "gpio"; bias-pull-up; }; sdc1_on: sdc1-on-state { clk-pins { pins = "sdc1_clk"; drive-strength = <10>; bias-disable; }; cmd-data-pins { pins = "sdc1_cmd", "sdc1_data"; drive-strength = <10>; bias-pull-up; }; }; wcnss_pin_a: wcnss-pin-active-state { pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; function = "wlan"; drive-strength = <6>; bias-pull-down; }; }; &usb { phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; extcon = <&smbb>, <&usb_id>; vbus-supply = <&chg_otg>; hnp-disable; srp-disable; adp-disable; status = "okay"; }; &usb_hs1_phy { v1p8-supply = <&pm8941_l6>; v3p3-supply = <&pm8941_l24>; extcon = <&smbb>; qcom,init-seq = /bits/ 8 <0x1 0x63>; status = "okay"; };