/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/memory.h * * Copyright (C) 2000-2002 Russell King * modification for nommu, Hyok S. Choi, 2004 * * Note: this file should not be included explicitly, include * to get access to these definitions. */ #ifndef __ASM_ARM_MEMORY_H #define __ASM_ARM_MEMORY_H #ifndef _ASMARM_PAGE_H #error "Do not include directly" #endif #include #include #include #include #ifdef CONFIG_NEED_MACH_MEMORY_H #include #endif #include /* * PAGE_OFFSET: the virtual address of the start of lowmem, memory above * the virtual address range for userspace. * KERNEL_OFFSET: the virtual address of the start of the kernel image. * we may further offset this with TEXT_OFFSET in practice. */ #define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET) #define KERNEL_OFFSET (PAGE_OFFSET) #ifdef CONFIG_MMU /* * TASK_SIZE - the maximum size of a user space task. * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area */ #ifndef CONFIG_KASAN #define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M)) #else #define TASK_SIZE (KASAN_SHADOW_START) #endif #define TASK_UNMAPPED_BASE ALIGN(TASK_SIZE / 3, SZ_16M) /* * The maximum size of a 26-bit user space task. */ #define TASK_SIZE_26 (UL(1) << 26) /* * The module space lives between the addresses given by TASK_SIZE * and PAGE_OFFSET - it must be within 32MB of the kernel text. */ #ifndef CONFIG_THUMB2_KERNEL #define MODULES_VADDR (PAGE_OFFSET - SZ_16M) #else /* smaller range for Thumb-2 symbols relocation (2^24)*/ #define MODULES_VADDR (PAGE_OFFSET - SZ_8M) #endif #if TASK_SIZE > MODULES_VADDR #error Top of user space clashes with start of module space #endif /* * The highmem pkmap virtual space shares the end of the module area. */ #ifdef CONFIG_HIGHMEM #define MODULES_END (PAGE_OFFSET - PMD_SIZE) #else #define MODULES_END (PAGE_OFFSET) #endif /* * The XIP kernel gets mapped at the bottom of the module vm area. * Since we use sections to map it, this macro replaces the physical address * with its virtual address while keeping offset from the base section. */ #define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff)) #define FDT_FIXED_BASE UL(0xff800000) #define FDT_FIXED_SIZE (2 * SECTION_SIZE) #define FDT_VIRT_BASE(physbase) ((void *)(FDT_FIXED_BASE | (physbase) % SECTION_SIZE)) #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) /* * Allow 16MB-aligned ioremap pages */ #define IOREMAP_MAX_ORDER 24 #endif #define VECTORS_BASE UL(0xffff0000) #else /* CONFIG_MMU */ #ifndef __ASSEMBLY__ extern unsigned long setup_vectors_base(void); extern unsigned long vectors_base; #define VECTORS_BASE vectors_base #endif /* * The limitation of user task size can grow up to the end of free ram region. * It is difficult to define and perhaps will never meet the original meaning * of this define that was meant to. * Fortunately, there is no reference for this in noMMU mode, for now. */ #define TASK_SIZE UL(0xffffffff) #ifndef TASK_UNMAPPED_BASE #define TASK_UNMAPPED_BASE UL(0x00000000) #endif #ifndef END_MEM #define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE) #endif /* * The module can be at any place in ram in nommu mode. */ #define MODULES_END (END_MEM) #define MODULES_VADDR PAGE_OFFSET #define XIP_VIRT_ADDR(physaddr) (physaddr) #define FDT_VIRT_BASE(physbase) ((void *)(physbase)) #endif /* !CONFIG_MMU */ #ifdef CONFIG_XIP_KERNEL #define KERNEL_START _sdata #else #define KERNEL_START _stext #endif #define KERNEL_END _end /* * We fix the TCM memories max 32 KiB ITCM resp DTCM at these * locations */ #ifdef CONFIG_HAVE_TCM #define ITCM_OFFSET UL(0xfffe0000) #define DTCM_OFFSET UL(0xfffe8000) #endif /* * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical * memory. This is used for XIP and NoMMU kernels, and on platforms that don't * have CONFIG_ARM_PATCH_PHYS_VIRT. Assembly code must always use * PLAT_PHYS_OFFSET and not PHYS_OFFSET. */ #define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET) #ifndef __ASSEMBLY__ /* * Physical start and end address of the kernel sections. These addresses are * 2MB-aligned to match the section mappings placed over the kernel. We use * u64 so that LPAE mappings beyond the 32bit limit will work out as well. */ extern u64 kernel_sec_start; extern u64 kernel_sec_end; /* * Physical vs virtual RAM address space conversion. These are * private definitions which should NOT be used outside memory.h * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. * * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. */ #if defined(CONFIG_ARM_PATCH_PHYS_VIRT) /* * Constants used to force the right instruction encodings and shifts * so that all we need to do is modify the 8-bit constant field. */ #define __PV_BITS_31_24 0x81000000 #define __PV_BITS_23_16 0x810000 #define __PV_BITS_7_0 0x81 extern unsigned long __pv_phys_pfn_offset; extern u64 __pv_offset; extern void fixup_pv_table(const void *, unsigned long); extern const void *__pv_table_begin, *__pv_table_end; #define PHYS_OFFSET ((phys_addr_t)__pv_phys_pfn_offset << PAGE_SHIFT) #define PHYS_PFN_OFFSET (__pv_phys_pfn_offset) #ifndef CONFIG_THUMB2_KERNEL #define __pv_stub(from,to,instr) \ __asm__("@ __pv_stub\n" \ "1: " instr " %0, %1, %2\n" \ "2: " instr " %0, %0, %3\n" \ " .pushsection .pv_table,\"a\"\n" \ " .long 1b - ., 2b - .\n" \ " .popsection\n" \ : "=r" (to) \ : "r" (from), "I" (__PV_BITS_31_24), \ "I"(__PV_BITS_23_16)) #define __pv_add_carry_stub(x, y) \ __asm__("@ __pv_add_carry_stub\n" \ "0: movw %R0, #0\n" \ " adds %Q0, %1, %R0, lsl #20\n" \ "1: mov %R0, %2\n" \ " adc %R0, %R0, #0\n" \ " .pushsection .pv_table,\"a\"\n" \ " .long 0b - ., 1b - .\n" \ " .popsection\n" \ : "=&r" (y) \ : "r" (x), "I" (__PV_BITS_7_0) \ : "cc") #else #define __pv_stub(from,to,instr) \ __asm__("@ __pv_stub\n" \ "0: movw %0, #0\n" \ " lsl %0, #21\n" \ " " instr " %0, %1, %0\n" \ " .pushsection .pv_table,\"a\"\n" \ " .long 0b - .\n" \ " .popsection\n" \ : "=&r" (to) \ : "r" (from)) #define __pv_add_carry_stub(x, y) \ __asm__("@ __pv_add_carry_stub\n" \ "0: movw %R0, #0\n" \ " lsls %R0, #21\n" \ " adds %Q0, %1, %R0\n" \ "1: mvn %R0, #0\n" \ " adc %R0, %R0, #0\n" \ " .pushsection .pv_table,\"a\"\n" \ " .long 0b - ., 1b - .\n" \ " .popsection\n" \ : "=&r" (y) \ : "r" (x) \ : "cc") #endif static inline phys_addr_t __virt_to_phys_nodebug(unsigned long x) { phys_addr_t t; if (sizeof(phys_addr_t) == 4) { __pv_stub(x, t, "add"); } else { __pv_add_carry_stub(x, t); } return t; } static inline unsigned long __phys_to_virt(phys_addr_t x) { unsigned long t; /* * 'unsigned long' cast discard upper word when * phys_addr_t is 64 bit, and makes sure that inline * assembler expression receives 32 bit argument * in place where 'r' 32 bit operand is expected. */ __pv_stub((unsigned long) x, t, "sub"); return t; } #else #define PHYS_OFFSET PLAT_PHYS_OFFSET #define PHYS_PFN_OFFSET ((unsigned long)(PHYS_OFFSET >> PAGE_SHIFT)) static inline phys_addr_t __virt_to_phys_nodebug(unsigned long x) { return (phys_addr_t)x - PAGE_OFFSET + PHYS_OFFSET; } static inline unsigned long __phys_to_virt(phys_addr_t x) { return x - PHYS_OFFSET + PAGE_OFFSET; } #endif static inline unsigned long virt_to_pfn(const void *p) { unsigned long kaddr = (unsigned long)p; return (((kaddr - PAGE_OFFSET) >> PAGE_SHIFT) + PHYS_PFN_OFFSET); } #define __pa_symbol_nodebug(x) __virt_to_phys_nodebug((x)) #ifdef CONFIG_DEBUG_VIRTUAL extern phys_addr_t __virt_to_phys(unsigned long x); extern phys_addr_t __phys_addr_symbol(unsigned long x); #else #define __virt_to_phys(x) __virt_to_phys_nodebug(x) #define __phys_addr_symbol(x) __pa_symbol_nodebug(x) #endif /* * These are *only* valid on the kernel direct mapped RAM memory. * Note: Drivers should NOT use these. They are the wrong * translation for translating DMA addresses. Use the driver * DMA support - see dma-mapping.h. */ #define virt_to_phys virt_to_phys static inline phys_addr_t virt_to_phys(const volatile void *x) { return __virt_to_phys((unsigned long)(x)); } #define phys_to_virt phys_to_virt static inline void *phys_to_virt(phys_addr_t x) { return (void *)__phys_to_virt(x); } /* * Drivers should NOT use these either. */ #define __pa(x) __virt_to_phys((unsigned long)(x)) #define __pa_symbol(x) __phys_addr_symbol(RELOC_HIDE((unsigned long)(x), 0)) #define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x))) #define pfn_to_kaddr(pfn) __va((phys_addr_t)(pfn) << PAGE_SHIFT) extern long long arch_phys_to_idmap_offset; /* * These are for systems that have a hardware interconnect supported alias * of physical memory for idmap purposes. Most cases should leave these * untouched. Note: this can only return addresses less than 4GiB. */ static inline bool arm_has_idmap_alias(void) { return IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset != 0; } #define IDMAP_INVALID_ADDR ((u32)~0) static inline unsigned long phys_to_idmap(phys_addr_t addr) { if (IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset) { addr += arch_phys_to_idmap_offset; if (addr > (u32)~0) addr = IDMAP_INVALID_ADDR; } return addr; } static inline phys_addr_t idmap_to_phys(unsigned long idmap) { phys_addr_t addr = idmap; if (IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset) addr -= arch_phys_to_idmap_offset; return addr; } static inline unsigned long __virt_to_idmap(unsigned long x) { return phys_to_idmap(__virt_to_phys(x)); } #define virt_to_idmap(x) __virt_to_idmap((unsigned long)(x)) /* * Conversion between a struct page and a physical address. * * page_to_pfn(page) convert a struct page * to a PFN number * pfn_to_page(pfn) convert a _valid_ PFN number to struct page * * * virt_to_page(k) convert a _valid_ virtual address to struct page * * virt_addr_valid(k) indicates whether a virtual address is valid */ #define ARCH_PFN_OFFSET PHYS_PFN_OFFSET #define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr)) #define virt_addr_valid(kaddr) (((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) \ && pfn_valid(virt_to_pfn(kaddr))) #endif #endif