// SPDX-License-Identifier: GPL-2.0+ OR MIT /* * Apple T8015 "A11" SoC * * Other names: H10, "Skye" * * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org> */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/apple-aic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/apple.h> / { interrupt-parent = <&aic>; #address-cells = <2>; #size-cells = <2>; clkref: clock-ref { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; clock-output-names = "clkref"; }; cpus { #address-cells = <2>; #size-cells = <0>; cpu-map { cluster0 { core0 { cpu = <&cpu_e0>; }; core1 { cpu = <&cpu_e1>; }; core2 { cpu = <&cpu_e2>; }; core3 { cpu = <&cpu_e3>; }; }; cluster1 { core0 { cpu = <&cpu_p0>; }; core1 { cpu = <&cpu_p1>; }; }; }; cpu_e0: cpu@0 { compatible = "apple,mistral"; reg = <0x0 0x0>; cpu-release-addr = <0 0>; /* To be filled by loader */ enable-method = "spin-table"; device_type = "cpu"; }; cpu_e1: cpu@1 { compatible = "apple,mistral"; reg = <0x0 0x1>; cpu-release-addr = <0 0>; /* To be filled by loader */ enable-method = "spin-table"; device_type = "cpu"; }; cpu_e2: cpu@2 { compatible = "apple,mistral"; reg = <0x0 0x2>; cpu-release-addr = <0 0>; /* To be filled by loader */ enable-method = "spin-table"; device_type = "cpu"; }; cpu_e3: cpu@3 { compatible = "apple,mistral"; reg = <0x0 0x3>; cpu-release-addr = <0 0>; /* To be filled by loader */ enable-method = "spin-table"; device_type = "cpu"; }; cpu_p0: cpu@10004 { compatible = "apple,monsoon"; reg = <0x0 0x10004>; cpu-release-addr = <0 0>; /* To be filled by loader */ enable-method = "spin-table"; device_type = "cpu"; }; cpu_p1: cpu@10005 { compatible = "apple,monsoon"; reg = <0x0 0x10005>; cpu-release-addr = <0 0>; /* To be filled by loader */ enable-method = "spin-table"; device_type = "cpu"; }; }; soc { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; nonposted-mmio; ranges; serial0: serial@22e600000 { compatible = "apple,s5l-uart"; reg = <0x2 0x2e600000 0x0 0x4000>; reg-io-width = <4>; interrupt-parent = <&aic>; interrupts = <AIC_IRQ 282 IRQ_TYPE_LEVEL_HIGH>; /* Use the bootloader-enabled clocks for now. */ clocks = <&clkref>, <&clkref>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; aic: interrupt-controller@232100000 { compatible = "apple,t8015-aic", "apple,aic"; reg = <0x2 0x32100000 0x0 0x8000>; #interrupt-cells = <3>; interrupt-controller; }; pinctrl_ap: pinctrl@233100000 { compatible = "apple,t8015-pinctrl", "apple,pinctrl"; reg = <0x2 0x33100000 0x0 0x1000>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl_ap 0 0 223>; apple,npins = <223>; interrupt-controller; #interrupt-cells = <2>; interrupt-parent = <&aic>; interrupts = <AIC_IRQ 50 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 51 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 52 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 53 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 54 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 55 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 56 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_aop: pinctrl@2340f0000 { compatible = "apple,t8015-pinctrl", "apple,pinctrl"; reg = <0x2 0x340f0000 0x0 0x4000>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl_aop 0 0 49>; apple,npins = <49>; interrupt-controller; #interrupt-cells = <2>; interrupt-parent = <&aic>; interrupts = <AIC_IRQ 135 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 136 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 137 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 138 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 139 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 140 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 141 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_nub: pinctrl@2351f0000 { compatible = "apple,t8015-pinctrl", "apple,pinctrl"; reg = <0x2 0x351f0000 0x0 0x4000>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl_nub 0 0 8>; apple,npins = <8>; interrupt-controller; #interrupt-cells = <2>; interrupt-parent = <&aic>; interrupts = <AIC_IRQ 168 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 169 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 170 IRQ_TYPE_LEVEL_HIGH>; }; wdt: watchdog@2352b0000 { compatible = "apple,t8015-wdt", "apple,wdt"; reg = <0x2 0x352b0000 0x0 0x4000>; clocks = <&clkref>; interrupt-parent = <&aic>; interrupts = <AIC_IRQ 172 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_smc: pinctrl@236024000 { compatible = "apple,t8015-pinctrl", "apple,pinctrl"; reg = <0x2 0x36024000 0x0 0x4000>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl_smc 0 0 6>; apple,npins = <6>; interrupt-controller; #interrupt-cells = <2>; interrupt-parent = <&aic>; interrupts = <AIC_IRQ 199 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 200 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 201 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 202 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 203 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 204 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 205 IRQ_TYPE_LEVEL_HIGH>; /* * SMC is not yet supported and accessing this pinctrl while SMC is * suspended results in a hang. */ status = "disabled"; }; }; timer { compatible = "arm,armv8-timer"; interrupt-parent = <&aic>; interrupt-names = "phys", "virt"; /* Note that A11 doesn't actually have a hypervisor (EL2 is not implemented). */ interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>, <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>; }; };