// SPDX-License-Identifier: GPL-2.0-only

#include <dt-bindings/clock/qcom,gcc-msm8917.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/thermal/thermal.h>

/ {
	interrupt-parent = <&intc>;

	#address-cells = <2>;
	#size-cells = <2>;

	chosen { };

	clocks {
		sleep_clk: sleep-clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
		};

		xo_board: xo-board {
			compatible = "fixed-clock";
			#clock-cells = <0>;
		};
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@100 {
			compatible = "arm,cortex-a53";
			reg = <0x100>;
			device_type = "cpu";
			next-level-cache = <&l2_0>;
			enable-method = "psci";
			clocks = <&apcs>;
			operating-points-v2 = <&cpu_opp_table>;
			#cooling-cells = <2>;
			power-domains = <&cpu_pd0>;
			power-domain-names = "psci";

			l2_0: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
			};
		};

		cpu1: cpu@101 {
			compatible = "arm,cortex-a53";
			reg = <0x101>;
			device_type = "cpu";
			next-level-cache = <&l2_0>;
			enable-method = "psci";
			clocks = <&apcs>;
			operating-points-v2 = <&cpu_opp_table>;
			#cooling-cells = <2>;
			power-domains = <&cpu_pd1>;
			power-domain-names = "psci";
		};

		cpu2: cpu@102 {
			compatible = "arm,cortex-a53";
			reg = <0x102>;
			device_type = "cpu";
			next-level-cache = <&l2_0>;
			enable-method = "psci";
			clocks = <&apcs>;
			operating-points-v2 = <&cpu_opp_table>;
			#cooling-cells = <2>;
			power-domains = <&cpu_pd2>;
			power-domain-names = "psci";
		};

		cpu3: cpu@103 {
			compatible = "arm,cortex-a53";
			reg = <0x103>;
			device_type = "cpu";
			next-level-cache = <&l2_0>;
			enable-method = "psci";
			clocks = <&apcs>;
			operating-points-v2 = <&cpu_opp_table>;
			#cooling-cells = <2>;
			power-domains = <&cpu_pd3>;
			power-domain-names = "psci";
		};

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&cpu0>;
				};

				core1 {
					cpu = <&cpu1>;
				};

				core2 {
					cpu = <&cpu2>;
				};

				core3 {
					cpu = <&cpu3>;
				};
			};
		};

		domain-idle-states {
			cluster_sleep_0: cluster-sleep-0 {
				compatible = "domain-idle-state";
				arm,psci-suspend-param = <0x41000053>;
				entry-latency-us = <700>;
				exit-latency-us = <1000>;
				min-residency-us = <6500>;
			};
		};

		idle-states {
			entry-method = "psci";

			cpu_sleep_0: cpu-sleep-0 {
				compatible = "arm,idle-state";
				idle-state-name = "standalone-power-collapse";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <125>;
				exit-latency-us = <180>;
				min-residency-us = <595>;
				local-timer-stop;
			};
		};

		cpu_opp_table: opp-table-cpu {
			compatible = "operating-points-v2";
			opp-shared;

			opp-960000000 {
				opp-hz = /bits/ 64 <960000000>;
			};

			opp-1094400000 {
				opp-hz = /bits/ 64 <1094400000>;
			};

			opp-1248000000 {
				opp-hz = /bits/ 64 <1248000000>;
			};

			opp-1401600000 {
				opp-hz = /bits/ 64 <1401600000>;
			};
		};
	};

	firmware {
		scm: scm {
			compatible = "qcom,scm-msm8916", "qcom,scm";
			clocks = <&gcc GCC_CRYPTO_CLK>,
				 <&gcc GCC_CRYPTO_AXI_CLK>,
				 <&gcc GCC_CRYPTO_AHB_CLK>;
			clock-names = "core", "bus", "iface";
			#reset-cells = <1>;

			qcom,dload-mode = <&tcsr 0x6100>;
		};
	};

	memory@80000000 {
		/* We expect the bootloader to fill in the reg */
		reg = <0 0x80000000 0 0>;
		device_type = "memory";
	};

	pmu {
		compatible = "arm,cortex-a53-pmu";
		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";

		cluster_pd: power-domain-cluster {
			#power-domain-cells = <0>;
			domain-idle-states = <&cluster_sleep_0>;
		};

		cpu_pd0: power-domain-cpu0 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&cpu_sleep_0>;
		};

		cpu_pd1: power-domain-cpu1 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&cpu_sleep_0>;
		};

		cpu_pd2: power-domain-cpu2 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&cpu_sleep_0>;
		};

		cpu_pd3: power-domain-cpu3 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&cpu_sleep_0>;
		};
	};

	rpm: remoteproc {
		compatible = "qcom,msm8917-rpm-proc", "qcom,rpm-proc";

		smd-edge {
			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
			qcom,ipc = <&apcs 8 0>;
			qcom,smd-edge = <15>;

			rpm_requests: rpm-requests {
				compatible = "qcom,rpm-msm8917", "qcom,smd-rpm";
				qcom,smd-channels = "rpm_requests";

				rpmcc: clock-controller {
					compatible = "qcom,rpmcc-msm8917", "qcom,rpmcc";
					#clock-cells = <1>;
					clocks = <&xo_board>;
					clock-names = "xo";
				};

				rpmpd: power-controller {
					compatible = "qcom,msm8917-rpmpd";
					#power-domain-cells = <1>;
					operating-points-v2 = <&rpmpd_opp_table>;

					rpmpd_opp_table: opp-table {
						compatible = "operating-points-v2";

						rpmpd_opp_ret: opp1 {
							opp-level = <RPM_SMD_LEVEL_RETENTION>;
						};

						rpmpd_opp_ret_plus: opp2 {
							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
						};

						rpmpd_opp_min_svs: opp3 {
							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
						};

						rpmpd_opp_low_svs: opp4 {
							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
						};

						rpmpd_opp_svs: opp5 {
							opp-level = <RPM_SMD_LEVEL_SVS>;
						};

						rpmpd_opp_svs_plus: opp6 {
							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
						};

						rpmpd_opp_nom: opp7 {
							opp-level = <RPM_SMD_LEVEL_NOM>;
						};

						rpmpd_opp_nom_plus: opp8 {
							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
						};

						rpmpd_opp_turbo: opp9 {
							opp-level = <RPM_SMD_LEVEL_TURBO>;
						};
					};
				};
			};
		};
	};

	reserved-memory {
		ranges;
		#address-cells = <2>;
		#size-cells = <2>;

		qseecom_mem: qseecom@85b00000 {
			reg = <0x0 0x85b00000 0x0 0x800000>;
			no-map;
		};

		smem@86300000 {
			compatible = "qcom,smem";
			reg = <0x0 0x86300000 0x0 0x100000>;
			no-map;

			hwlocks = <&tcsr_mutex 3>;
			qcom,rpm-msg-ram = <&rpm_msg_ram>;
		};

		reserved@86400000 {
			reg = <0x0 0x86400000 0x0 0x400000>;
			no-map;
		};

		rmtfs@92100000 {
			compatible = "qcom,rmtfs-mem";
			reg = <0x0 0x92100000 0x0 0x180000>;
			no-map;

			qcom,client-id = <1>;
		};

		adsp_mem: adsp {
			size = <0x0 0x1100000>;
			alignment = <0x0 0x100000>;
			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
			no-map;
			status = "disabled";
		};

		mba_mem: mba {
			size = <0x0 0x100000>;
			alignment = <0x0 0x100000>;
			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
			no-map;
			status = "disabled";
		};

		venus_mem: venus {
			size = <0x0 0x400000>;
			alignment = <0x0 0x100000>;
			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
			no-map;
			status = "disabled";
		};

		wcnss_mem: wcnss {
			size = <0x0 0x700000>;
			alignment = <0x0 0x100000>;
			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
			no-map;
			status = "disabled";
		};
	};

	smp2p-adsp {
		compatible = "qcom,smp2p";
		qcom,smem = <443>, <429>;

		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;

		mboxes = <&apcs 10>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <2>;

		adsp_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";

			#qcom,smem-state-cells = <1>;
		};

		adsp_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";

			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-modem {
		compatible = "qcom,smp2p";
		qcom,smem = <435>, <428>;

		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;

		mboxes = <&apcs 14>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <1>;

		modem_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";

			#qcom,smem-state-cells = <1>;
		};

		modem_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";

			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-wcnss {
		compatible = "qcom,smp2p";
		qcom,smem = <451>, <431>;

		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;

		mboxes = <&apcs 18>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <4>;

		wcnss_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";

			#qcom,smem-state-cells = <1>;
		};

		wcnss_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";

			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smsm {
		compatible = "qcom,smsm";

		#address-cells = <1>;
		#size-cells = <0>;

		mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>;

		apps_smsm: apps@0 {
			reg = <0>;

			#qcom,smem-state-cells = <1>;
		};

		hexagon_smsm: hexagon@1 {
			reg = <1>;
			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		wcnss_smsm: wcnss@6 {
			reg = <6>;
			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	soc: soc@0 {
		compatible = "simple-bus";
		ranges = <0 0 0 0xffffffff>;
		#address-cells = <1>;
		#size-cells = <1>;

		rpm_msg_ram: sram@60000 {
			compatible = "qcom,rpm-msg-ram";
			reg = <0x00060000 0x8000>;
		};

		usb_hs_phy: phy@6c000 {
			compatible = "qcom,usb-hs-28nm-femtophy";
			reg = <0x0006c000 0x200>;
			#phy-cells = <0>;
			clocks = <&xo_board>,
				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
			clock-names = "ref", "ahb", "sleep";
			resets = <&gcc GCC_QUSB2_PHY_BCR>,
				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
			reset-names = "phy", "por";
			status = "disabled";
		};

		qfprom: qfprom@a4000 {
			compatible = "qcom,msm8917-qfprom", "qcom,qfprom";
			reg = <0x000a4000 0x1000>;
			#address-cells = <1>;
			#size-cells = <1>;

			tsens_base1: base1@1d8 {
				reg = <0x1d8 1>;
				bits = <0 8>;
			};

			tsens_s5_p1: s5-p1@1d9 {
				reg = <0x1d9 1>;
				bits = <0 6>;
			};

			tsens_s5_p2: s5-p2@1d9 {
				reg = <0x1d9 2>;
				bits = <6 6>;
			};

			tsens_s6_p1: s6-p1@1da {
				reg = <0x1da 2>;
				bits = <4 6>;
			};

			tsens_s6_p2: s6-p2@1db {
				reg = <0x1db 1>;
				bits = <2 6>;
			};

			tsens_s7_p1: s7-p1@1dc {
				reg = <0x1dc 1>;
				bits = <0 6>;
			};

			tsens_s7_p2: s7-p2@1dc {
				reg = <0x1dc 2>;
				bits = <6 6>;
			};

			tsens_s8_p1: s8-p1@1dd {
				reg = <0x1dd 2>;
				bits = <4 6>;
			};

			tsens_s8_p2: s8-p2@1de {
				reg = <0x1de 1>;
				bits = <2 6>;
			};

			tsens_base2: base2@1df {
				reg = <0x1df 1>;
				bits = <0 8>;
			};

			tsens_mode: mode@210 {
				reg = <0x210 1>;
				bits = <0 3>;
			};

			tsens_s0_p1: s0-p1@210 {
				reg = <0x210 2>;
				bits = <3 6>;
			};

			tsens_s0_p2: s0-p2@211 {
				reg = <0x211 1>;
				bits = <1 6>;
			};

			tsens_s1_p1: s1-p1@211 {
				reg = <0x211 2>;
				bits = <7 6>;
			};

			tsens_s1_p2: s1-p2@212 {
				reg = <0x212 2>;
				bits = <5 6>;
			};

			tsens_s2_p1: s2-p1@213 {
				reg = <0x213 2>;
				bits = <3 6>;
			};

			tsens_s2_p2: s2-p2@214 {
				reg = <0x214 1>;
				bits = <1 6>;
			};

			tsens_s3_p1: s3-p1@214 {
				reg = <0x214 2>;
				bits = <7 6>;
			};

			tsens_s3_p2: s3-p2@215 {
				reg = <0x215 2>;
				bits = <5 6>;
			};

			tsens_s4_p1: s4-p1@216 {
				reg = <0x216 2>;
				bits = <3 6>;
			};

			tsens_s4_p2: s4-p2@217 {
				reg = <0x217 1>;
				bits = <1 6>;
			};

			tsens_s9_p1: s9-p1@230{
				reg = <0x230 1>;
				bits = <0 6>;
			};

			tsens_s9_p2: s9-p2@230 {
				reg = <0x230 2>;
				bits = <6 6>;
			};

			tsens_s10_p1: s10-p1@231 {
				reg = <0x231 2>;
				bits = <4 6>;
			};

			tsens_s10_p2: s10-p2@232 {
				reg = <0x232 1>;
				bits = <2 6>;
			};
		};

		rng@e3000 {
			compatible = "qcom,prng";
			reg = <0x000e3000 0x1000>;
			clocks = <&gcc GCC_PRNG_AHB_CLK>;
			clock-names = "core";
		};

		tsens: thermal-sensor@4a9000 {
			compatible = "qcom,msm8937-tsens", "qcom,tsens-v1";
			reg = <0x004a9000 0x1000>,
			      <0x004a8000 0x1000>;
			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow";
			nvmem-cells = <&tsens_mode>,
				      <&tsens_base1>, <&tsens_base2>,
				      <&tsens_s0_p1>, <&tsens_s0_p2>,
				      <&tsens_s1_p1>, <&tsens_s1_p2>,
				      <&tsens_s2_p1>, <&tsens_s2_p2>,
				      <&tsens_s3_p1>, <&tsens_s3_p2>,
				      <&tsens_s4_p1>, <&tsens_s4_p2>,
				      <&tsens_s5_p1>, <&tsens_s5_p2>,
				      <&tsens_s6_p1>, <&tsens_s6_p2>,
				      <&tsens_s7_p1>, <&tsens_s7_p2>,
				      <&tsens_s8_p1>, <&tsens_s8_p2>,
				      <&tsens_s9_p1>, <&tsens_s9_p2>,
				      <&tsens_s10_p1>, <&tsens_s10_p2>;
			nvmem-cell-names = "mode",
					   "base1", "base2",
					   "s0_p1", "s0_p2",
					   "s1_p1", "s1_p2",
					   "s2_p1", "s2_p2",
					   "s3_p1", "s3_p2",
					   "s4_p1", "s4_p2",
					   "s5_p1", "s5_p2",
					   "s6_p1", "s6_p2",
					   "s7_p1", "s7_p2",
					   "s8_p1", "s8_p2",
					   "s9_p1", "s9_p2",
					   "s10_p1", "s10_p2";
			#qcom,sensors = <11>;
			#thermal-sensor-cells = <1>;
		};

		restart@4ab000 {
			compatible = "qcom,pshold";
			reg = <0x004ab000 0x4>;
		};

		tlmm: pinctrl@1000000 {
			compatible = "qcom,msm8917-pinctrl";
			reg = <0x01000000 0x300000>;
			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			gpio-ranges = <&tlmm 0 0 134>;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;

			blsp1_i2c2_default: blsp1-i2c2-default-state {
				pins = "gpio6", "gpio7";
				function = "blsp_i2c2";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
				pins = "gpio6", "gpio7";
				function = "gpio";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_i2c3_default: blsp1-i2c3-default-state {
				pins = "gpio10", "gpio11";
				function = "blsp_i2c3";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
				pins = "gpio10", "gpio11";
				function = "gpio";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_i2c4_default: blsp1-i2c4-default-state {
				pins = "gpio14", "gpio15";
				function = "blsp_i2c4";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
				pins = "gpio14", "gpio15";
				function = "gpio";
				drive-strength = <2>;
				bias-disable;
			};

			blsp2_i2c1_default: blsp2-i2c1-default-state {
				pins = "gpio18", "gpio19";
				function = "blsp_i2c5";
				drive-strength = <2>;
				bias-disable;
			};

			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
				pins = "gpio18", "gpio19";
				function = "gpio";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_spi3_default: blsp1-spi3-default-state {
				cs-pins {
					pins = "gpio10";
					function = "blsp_spi3";
					drive-strength = <2>;
					bias-disable;
				};

				spi-pins {
					pins = "gpio8", "gpio9", "gpio11";
					function = "blsp_spi3";
					drive-strength = <12>;
					bias-disable;
				};
			};

			blsp1_spi3_sleep: blsp1-spi3-sleep-state {
				cs-pins {
					pins = "gpio10";
					function = "gpio";
					drive-strength = <2>;
					bias-disable;
				};

				spi-pins {
					pins = "gpio8", "gpio9", "gpio11";
					function = "gpio";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			blsp2_spi2_default: blsp2-spi2-default-state {
				cs0-pins {
					pins = "gpio47";
					function = "blsp_spi6";
					drive-strength = <16>;
					bias-disable;
				};

				cs1-pins {
					pins = "gpio22";
					function = "blsp_spi6";
					drive-strength = <16>;
					bias-disable;
				};

				spi-pins {
					pins = "gpio20", "gpio21", "gpio23";
					function = "blsp_spi6";
					drive-strength = <16>;
					bias-disable;
				};
			};

			blsp2_spi2_sleep: blsp2-spi2-sleep-state {
				cs0-pins {
					pins = "gpio47";
					function = "gpio";
					drive-strength = <2>;
					bias-disable;
				};

				cs1-pins {
					pins = "gpio22";
					function = "gpio";
					drive-strength = <2>;
					bias-disable;
				};

				spi-pins {
					pins = "gpio20", "gpio21", "gpio23";
					function = "gpio";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			blsp1_uart1_default: blsp1-uart1-default-state {
				pins = "gpio0", "gpio1", "gpio2", "gpio3";
				function = "blsp_uart1";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_uart1_sleep: blsp1-uart1-sleep-state {
				pins = "gpio0", "gpio1", "gpio2", "gpio3";
				function = "gpio";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_uart2_default: blsp1-uart2-default-state {
				pins = "gpio4", "gpio5";
				function = "blsp_uart2";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
				pins = "gpio4", "gpio5";
				function = "gpio";
				drive-strength = <2>;
				bias-pull-down;
			};

			sdc1_default: sdc1-default-state {
				clk-pins {
					pins = "sdc1_clk";
					bias-disable;
					drive-strength = <16>;
				};

				cmd-pins {
					pins = "sdc1_cmd";
					bias-pull-up;
					drive-strength = <10>;
				};

				data-pins {
					pins = "sdc1_data";
					bias-pull-up;
					drive-strength = <10>;
				};

				rclk-pins {
					pins = "sdc1_rclk";
					bias-pull-down;
				};
			};

			sdc1_sleep: sdc1-sleep-state {
				clk-pins {
					pins = "sdc1_clk";
					bias-disable;
					drive-strength = <2>;
				};

				cmd-pins {
					pins = "sdc1_cmd";
					bias-pull-up;
					drive-strength = <2>;
				};

				data-pins {
					pins = "sdc1_data";
					bias-pull-up;
					drive-strength = <2>;
				};

				rclk-pins {
					pins = "sdc1_rclk";
					bias-pull-down;
				};
			};

			sdc2_default: sdc2-default-state {
				clk-pins {
					pins = "sdc2_clk";
					bias-disable;
					drive-strength = <16>;
				};

				cmd-pins {
					pins = "sdc2_cmd";
					bias-pull-up;
					drive-strength = <10>;
				};

				data-pins {
					pins = "sdc2_data";
					bias-pull-up;
					drive-strength = <10>;
				};
			};

			sdc2_sleep: sdc2-sleep-state {
				clk-pins {
					pins = "sdc2_clk";
					bias-disable;
					drive-strength = <2>;
				};

				cmd-pins {
					pins = "sdc2_cmd";
					bias-pull-up;
					drive-strength = <2>;
				};

				data-pins {
					pins = "sdc2_data";
					bias-pull-up;
					drive-strength = <2>;
				};
			};

			wcnss_pin_a: wcnss-active-state {
				wcss-wlan-pins {
					pins = "gpio79", "gpio80";
					function = "wcss_wlan";
					drive-strength = <6>;
					bias-pull-up;

				};

				wcss-wlan0-pins {
					pins = "gpio78";
					function = "wcss_wlan0";
					drive-strength = <6>;
					bias-pull-up;

				};

				wcss-wlan1-pins {
					pins = "gpio77";
					function = "wcss_wlan1";
					drive-strength = <6>;
					bias-pull-up;

				};

				wcss-wlan2-pins {
					pins = "gpio76";
					function = "wcss_wlan2";
					drive-strength = <6>;
					bias-pull-up;

				};
			};
		};

		gcc: clock-controller@1800000 {
			compatible = "qcom,gcc-msm8917";
			reg = <0x01800000 0x80000>;
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
			clocks = <&xo_board>,
				 <&sleep_clk>,
				 <&mdss_dsi0_phy 1>,
				 <&mdss_dsi0_phy 0>;
			clock-names = "xo",
				      "sleep_clk",
				      "dsi0pll",
				      "dsi0pllbyte";
		};

		tcsr_mutex: hwlock@1905000 {
			compatible = "qcom,tcsr-mutex";
			reg = <0x01905000 0x20000>;
			#hwlock-cells = <1>;
		};

		tcsr: syscon@1937000 {
			compatible = "qcom,tcsr-msm8917", "syscon";
			reg = <0x01937000 0x30000>;
		};

		mdss: display-subsystem@1a00000 {
			compatible = "qcom,mdss";
			reg = <0x01a00000 0x1000>,
			      <0x01ab0000 0x1040>;
			reg-names = "mdss_phys", "vbif_phys";
			ranges;

			power-domains = <&gcc MDSS_GDSC>;

			clocks = <&gcc GCC_MDSS_AHB_CLK>,
				 <&gcc GCC_MDSS_AXI_CLK>,
				 <&gcc GCC_MDSS_VSYNC_CLK>;
			clock-names = "iface",
				      "bus",
				      "vsync";

			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;

			interrupt-controller;
			#interrupt-cells = <1>;

			#address-cells = <1>;
			#size-cells = <1>;

			status = "disabled";

			mdp: display-controller@1a01000 {
				compatible = "qcom,msm8917-mdp5", "qcom,mdp5";
				reg = <0x01a01000 0x89000>;
				reg-names = "mdp_phys";

				interrupt-parent = <&mdss>;
				interrupts = <0>;

				power-domains = <&gcc MDSS_GDSC>;

				clocks = <&gcc GCC_MDSS_AHB_CLK>,
					 <&gcc GCC_MDSS_AXI_CLK>,
					 <&gcc GCC_MDSS_MDP_CLK>,
					 <&gcc GCC_MDSS_VSYNC_CLK>;
				clock-names = "iface",
					      "bus",
					      "core",
					      "vsync";

				iommus = <&apps_iommu 0x15>;

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;

						mdp5_intf1_out: endpoint {
							remote-endpoint = <&mdss_dsi0_in>;
						};
					};
				};
			};

			mdss_dsi0: dsi@1a94000 {
				compatible = "qcom,mdss-dsi-ctrl";
				reg = <0x01a94000 0x300>;
				reg-names = "dsi_ctrl";

				interrupt-parent = <&mdss>;
				interrupts = <4>;

				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
						  <&gcc PCLK0_CLK_SRC>;
				assigned-clock-parents = <&mdss_dsi0_phy 0>,
							 <&mdss_dsi0_phy 1>;

				clocks = <&gcc GCC_MDSS_MDP_CLK>,
					 <&gcc GCC_MDSS_AHB_CLK>,
					 <&gcc GCC_MDSS_AXI_CLK>,
					 <&gcc GCC_MDSS_BYTE0_CLK>,
					 <&gcc GCC_MDSS_PCLK0_CLK>,
					 <&gcc GCC_MDSS_ESC0_CLK>;
				clock-names = "mdp_core",
					      "iface",
					      "bus",
					      "byte",
					      "pixel",
					      "core";
				phys = <&mdss_dsi0_phy>;

				operating-points-v2 = <&mdss_dsi0_opp_table>;
				power-domains = <&rpmpd MSM8917_VDDCX>;

				#address-cells = <1>;
				#size-cells = <0>;

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;

						mdss_dsi0_in: endpoint {
							remote-endpoint = <&mdp5_intf1_out>;
						};
					};

					port@1 {
						reg = <1>;

						mdss_dsi0_out: endpoint {
						};
					};
				};

				mdss_dsi0_opp_table: opp-table {
					compatible = "operating-points-v2";

					opp-125000000 {
						opp-hz = /bits/ 64 <125000000>;
						required-opps = <&rpmpd_opp_svs>;
					};

					opp-187500000 {
						opp-hz = /bits/ 64 <187500000>;
						required-opps = <&rpmpd_opp_nom>;
					};
				};
			};

			mdss_dsi0_phy: phy@1a94a00 {
				compatible = "qcom,dsi-phy-28nm-8937";
				reg = <0x01a94a00 0xd4>,
				      <0x01a94400 0x280>,
				      <0x01a94b80 0x30>;
				reg-names = "dsi_pll",
					    "dsi_phy",
					    "dsi_phy_regulator";

				#clock-cells = <1>;
				#phy-cells = <0>;

				clocks = <&gcc GCC_MDSS_AHB_CLK>,
					 <&xo_board>;
				clock-names = "iface", "ref";
			};
		};

		apps_iommu: iommu@1e20000 {
			compatible = "qcom,msm8917-iommu", "qcom,msm-iommu-v1";
			ranges = <0 0x01e20000 0x20000>;
			#address-cells = <1>;
			#size-cells = <1>;
			#iommu-cells = <1>;

			clocks = <&gcc GCC_SMMU_CFG_CLK>,
				 <&gcc GCC_APSS_TCU_CLK>;
			clock-names = "iface", "bus";

			qcom,iommu-secure-id = <17>;

			/* VFE */
			iommu-ctx@14000 {
				compatible = "qcom,msm-iommu-v1-ns";
				reg = <0x14000 0x1000>;
				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
			};

			/* MDP_0 */
			iommu-ctx@15000 {
				compatible = "qcom,msm-iommu-v1-ns";
				reg = <0x15000 0x1000>;
				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
			};

			/* VENUS_NS */
			iommu-ctx@16000 {
				compatible = "qcom,msm-iommu-v1-ns";
				reg = <0x16000 0x1000>;
				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
			};
		};

		gpu_iommu: iommu@1f08000 {
			compatible = "qcom,msm8917-iommu", "qcom,msm-iommu-v1";
			ranges = <0 0x01f08000 0x10000>;

			#address-cells = <1>;
			#size-cells = <1>;
			#iommu-cells = <1>;

			clocks = <&gcc GCC_SMMU_CFG_CLK>,
				 <&gcc GCC_GFX_TCU_CLK>;
			clock-names = "iface", "bus";
			qcom,iommu-secure-id = <18>;

			iommu-ctx@0 {
				compatible = "qcom,msm-iommu-v2-ns";
				reg = <0 0x1000>;
				interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
			};
		};

		gpu: gpu@1c00000 {
			compatible = "qcom,adreno-306.32", "qcom,adreno";
			reg = <0x01c00000 0x20000>;
			reg-names = "kgsl_3d0_reg_memory";
			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "kgsl_3d0_irq";
			clock-names = "core",
				      "iface",
				      "mem_iface",
				      "alt_mem_iface",
				      "gfx3d";
			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
				 <&gcc GCC_OXILI_AHB_CLK>,
				 <&gcc GCC_BIMC_GFX_CLK>,
				 <&gcc GCC_BIMC_GPU_CLK>,
				 <&gcc GFX3D_CLK_SRC>;
			power-domains = <&gcc OXILI_GX_GDSC>;
			operating-points-v2 = <&gpu_opp_table>;
			#cooling-cells = <2>;

			iommus = <&gpu_iommu 0>;

			status = "disabled";

			gpu_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-19200000 {
					opp-hz = /bits/ 64 <19200000>;
				};

				opp-270000000 {
					opp-hz = /bits/ 64 <270000000>;
				};

				opp-400000000 {
					opp-hz = /bits/ 64 <400000000>;
				};

				opp-484800000 {
					opp-hz = /bits/ 64 <484800000>;
				};

				opp-523200000 {
					opp-hz = /bits/ 64 <523200000>;
				};

				opp-598000000 {
					opp-hz = /bits/ 64 <598000000>;
				};
			};
		};

		spmi_bus: spmi@200f000 {
			compatible = "qcom,spmi-pmic-arb";
			reg = <0x0200f000 0x001000>,
			      <0x02400000 0x800000>,
			      <0x02c00000 0x800000>,
			      <0x03800000 0x200000>,
			      <0x0200a000 0x002100>;
			reg-names = "core",
				    "chnls",
				    "obsrvr",
				    "intr",
				    "cnfg";
			interrupt-names = "periph_irq";
			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
			qcom,ee = <0>;
			qcom,channel = <0>;
			#address-cells = <2>;
			#size-cells = <0>;
			interrupt-controller;
			#interrupt-cells = <4>;
		};

		bam_dmux_dma: dma-controller@4044000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x04044000 0x19000>;
			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
			#dma-cells = <1>;
			qcom,ee = <0>;

			num-channels = <6>;
			qcom,num-ees = <1>;
			qcom,powered-remotely;

			status = "disabled";
		};

		sdhc_1: mmc@7824900 {
			compatible = "qcom,sdhci-msm-v4";
			reg = <0x07824900 0x500>,
			      <0x07824000 0x800>;
			reg-names = "hc", "core";

			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";
			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
				 <&gcc GCC_SDCC1_APPS_CLK>,
				 <&xo_board>;
			clock-names = "iface", "core", "xo";
			pinctrl-0 = <&sdc1_default>;
			pinctrl-1 = <&sdc1_sleep>;
			pinctrl-names = "default", "sleep";
			power-domains = <&rpmpd MSM8917_VDDCX>;
			mmc-hs200-1_8v;
			mmc-hs400-1_8v;
			mmc-ddr-1_8v;
			bus-width = <8>;
			non-removable;
			status = "disabled";
		};

		sdhc_2: mmc@7864900 {
			compatible = "qcom,sdhci-msm-v4";
			reg = <0x07864900 0x500>,
			      <0x07864000 0x800>;
			reg-names = "hc", "core";

			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";
			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
				 <&gcc GCC_SDCC2_APPS_CLK>,
				 <&xo_board>;
			clock-names = "iface", "core", "xo";
			pinctrl-0 = <&sdc2_default>;
			pinctrl-1 = <&sdc2_sleep>;
			pinctrl-names = "default", "sleep";
			power-domains = <&rpmpd MSM8917_VDDCX>;
			bus-width = <4>;
			status = "disabled";
		};

		blsp1_dma: dma-controller@7884000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x07884000 0x1f000>;
			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "bam_clk";
			qcom,controlled-remotely;
			#dma-cells = <1>;
			num-channels = <12>;
			qcom,num-ees = <4>;
			qcom,ee = <0>;
		};

		blsp2_dma: dma-controller@7ac4000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x07ac4000 0x1d000>;
			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "bam_clk";
			qcom,controlled-remotely;
			#dma-cells = <1>;
			num-channels = <10>;
			qcom,num-ees = <4>;
			qcom,ee = <0>;
		};

		blsp1_uart1: serial@78af000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x078af000 0x200>;
			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
			dma-names = "tx", "rx";
			pinctrl-0 = <&blsp1_uart1_default>;
			pinctrl-1 = <&blsp1_uart1_sleep>;
			pinctrl-names = "default", "sleep";
			status = "disabled";
		};

		blsp1_uart2: serial@78b0000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x078b0000 0x200>;
			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
			dma-names = "tx", "rx";
			pinctrl-0 = <&blsp1_uart2_default>;
			pinctrl-1 = <&blsp1_uart2_sleep>;
			pinctrl-names = "default", "sleep";
			status = "disabled";
		};

		blsp1_i2c2: i2c@78b6000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x078b6000 0x600>;
			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
			dma-names = "tx", "rx";
			pinctrl-0 = <&blsp1_i2c2_default>;
			pinctrl-1 = <&blsp1_i2c2_sleep>;
			pinctrl-names = "default", "sleep";
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_i2c3: i2c@78b7000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x078b7000 0x600>;
			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
			dma-names = "tx", "rx";
			pinctrl-0 = <&blsp1_i2c3_default>;
			pinctrl-1 = <&blsp1_i2c3_sleep>;
			pinctrl-names = "default", "sleep";
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_spi3: spi@78b7000 {
			compatible = "qcom,spi-qup-v2.2.1";
			reg = <0x078b7000 0x600>;
			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
			dma-names = "tx", "rx";
			pinctrl-0 = <&blsp1_spi3_default>;
			pinctrl-1 = <&blsp1_spi3_sleep>;
			pinctrl-names = "default", "sleep";
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_i2c4: i2c@78b8000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x078b8000 0x500>;
			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
			dma-names = "tx", "rx";
			pinctrl-0 = <&blsp1_i2c4_default>;
			pinctrl-1 = <&blsp1_i2c4_sleep>;
			pinctrl-names = "default", "sleep";
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp2_i2c1: i2c@7af5000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x07af5000 0x600>;
			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
			dma-names = "tx", "rx";
			pinctrl-0 = <&blsp2_i2c1_default>;
			pinctrl-1 = <&blsp2_i2c1_sleep>;
			pinctrl-names = "default", "sleep";
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp2_spi2: spi@7af6000 {
			compatible = "qcom,spi-qup-v2.2.1";
			reg = <0x07af6000 0x600>;
			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
				 <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
			dma-names = "tx", "rx";
			pinctrl-0 = <&blsp2_spi2_default>;
			pinctrl-1 = <&blsp2_spi2_sleep>;
			pinctrl-names = "default", "sleep";
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		usb: usb@78db000 {
			compatible = "qcom,ci-hdrc";
			reg = <0x078db000 0x200>,
			      <0x078db200 0x200>;
			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
			clock-names = "iface", "core";
			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
			assigned-clock-rates = <80000000>;
			resets = <&gcc GCC_USB_HS_BCR>;
			reset-names = "core";
			phy_type = "ulpi";
			dr_mode = "otg";
			hnp-disable;
			srp-disable;
			adp-disable;
			ahb-burst-config = <0>;
			phy-names = "usb-phy";
			phys = <&usb_hs_phy>;
			status = "disabled";
			#reset-cells = <1>;
		};

		wcnss: remoteproc@a204000 {
			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
			reg = <0x0a204000 0x2000>,
			      <0x0a202000 0x1000>,
			      <0x0a21b000 0x3000>;
			reg-names = "ccu", "dxe", "pmu";

			memory-region = <&wcnss_mem>;

			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";

			power-domains = <&rpmpd MSM8917_VDDCX>,
					<&rpmpd MSM8917_VDDMX>;
			power-domain-names = "cx", "mx";

			qcom,smem-states = <&wcnss_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			pinctrl-0 = <&wcnss_pin_a>;
			pinctrl-names = "default";

			status = "disabled";

			wcnss_iris: iris {
				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
				clock-names = "xo";
			};

			smd-edge {
				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;

				mboxes = <&apcs 17>;
				qcom,smd-edge = <6>;
				qcom,remote-pid = <4>;

				label = "pronto";

				wcnss_ctrl: wcnss {
					compatible = "qcom,wcnss";
					qcom,smd-channels = "WCNSS_CTRL";

					qcom,mmio = <&wcnss>;

					wcnss_bt: bluetooth {
						compatible = "qcom,wcnss-bt";
					};

					wcnss_wifi: wifi {
						compatible = "qcom,wcnss-wlan";

						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
						interrupt-names = "tx", "rx";

						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
						qcom,smem-state-names = "tx-enable",
									"tx-rings-empty";
					};
				};
			};
		};

		intc: interrupt-controller@b000000 {
			compatible = "qcom,msm-qgic2";
			reg = <0x0b000000 0x1000>,
			      <0x0b002000 0x1000>;
			interrupt-controller;
			#interrupt-cells = <3>;
		};

		apcs: mailbox@b011000 {
			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
			reg = <0x0b011000 0x1000>;
			#mbox-cells = <1>;
			clocks = <&a53pll>, <&gcc GPLL0_EARLY>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "pll", "aux", "ref";
			#clock-cells = <0>;
		};

		a53pll: clock@b016000 {
			compatible = "qcom,msm8939-a53pll";
			reg = <0x0b016000 0x40>;
			clocks = <&xo_board>;
			clock-names = "xo";
			#clock-cells = <0>;
			operating-points-v2 = <&pll_opp_table>;

			pll_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-960000000 {
					opp-hz = /bits/ 64 <960000000>;
				};

				opp-1094400000 {
					opp-hz = /bits/ 64 <1094400000>;
				};

				opp-1248000000 {
					opp-hz = /bits/ 64 <1248000000>;
				};

				opp-1401600000 {
					opp-hz = /bits/ 64 <1401600000>;
				};
			};
		};

		watchdog@b017000 {
			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
			reg = <0x0b017000 0x1000>;
			clocks = <&sleep_clk>;
		};

		timer@b120000 {
			compatible = "arm,armv7-timer-mem";
			reg = <0x0b120000 0x1000>;
			ranges;
			#address-cells = <1>;
			#size-cells = <1>;

			frame@b121000 {
				reg = <0x0b121000 0x1000>,
				      <0x0b122000 0x1000>;
				frame-number = <0>;
				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
			};

			frame@b123000 {
				reg = <0x0b123000 0x1000>;
				frame-number = <1>;
				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
				status = "disabled";
			};

			frame@b124000 {
				reg = <0x0b124000 0x1000>;
				frame-number = <2>;
				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
				status = "disabled";
			};

			frame@b125000 {
				reg = <0x0b125000 0x1000>;
				frame-number = <3>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
				status = "disabled";
			};

			frame@b126000 {
				reg = <0x0b126000 0x1000>;
				frame-number = <4>;
				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
				status = "disabled";
			};

			frame@b127000 {
				reg = <0x0b127000 0x1000>;
				frame-number = <5>;
				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
				status = "disabled";
			};

			frame@b128000 {
				reg = <0x0b128000 0x1000>;
				frame-number = <6>;
				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
				status = "disabled";
			};
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
	};

	thermal_zones: thermal-zones {
		aoss-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 0>;

			trips {
				aoss_alert0: trip-point0 {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "hot";
				};
			};
		};

		camera-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 3>;

			trips {
				camera_alert0: trip-point0 {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "hot";
				};
			};
		};

		cpuss1-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 4>;

			cooling-maps {
				map0 {
					trip = <&cpuss1_alert0>;
					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};

			trips {
				cpuss1_alert0: trip-point0 {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpuss1_alert1: trip-point1 {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "hot";
				};

				cpuss1_crit: cpuss1-crit {
					temperature = <100000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		cpu0-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 5>;

			cooling-maps {
				map0 {
					trip = <&cpu0_alert1>;
					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};

			trips {
				cpu0_alert0: trip-point0 {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu0_alert1: trip-point1 {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "hot";
				};

				cpu0_crit: cpu-crit {
					temperature = <100000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		cpu1-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 6>;

			cooling-maps {
				map0 {
					trip = <&cpu1_alert1>;
					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};

			trips {
				cpu1_alert0: trip-point0 {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "hot";
				};

				cpu1_alert1: trip-point1 {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu1_crit: cpu-crit {
					temperature = <100000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		cpu2-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 7>;

			cooling-maps {
				map0 {
					trip = <&cpu2_alert1>;
					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};

			trips {
				cpu2_alert0: trip-point0 {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "hot";
				};

				cpu2_alert1: trip-point1 {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu2_crit: cpu-crit {
					temperature = <100000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		cpu3-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 8>;

			cooling-maps {
				map0 {
					trip = <&cpu3_alert1>;
					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};

			trips {
				cpu3_alert0: trip-point0 {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "hot";
				};

				cpu3_alert1: trip-point1 {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu3_crit: cpu-crit {
					temperature = <100000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		gpu-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 9>;

			cooling-maps {
				map0 {
					trip = <&gpu_alert>;
					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};

			trips {
				gpu_alert: trip-point0 {
					temperature = <70000>;
					hysteresis = <2000>;
					type = "passive";
				};

				gpu_crit: gpu-crit {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};

		};

		mdm-core-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 1>;

			trips {
				mdm_core_alert0: trip-point0 {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "hot";
				};
			};
		};

		q6-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 2>;

			trips {
				q6_alert0: trip-point0 {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "hot";
				};
			};
		};
	};
};